If you’re in search of board insurance on a budget, then the Burton Board Sack is it. Stash your board plus an extra deck, & don’t forget tools, hardware, & tuning supplies by throwing them in the zippered accessory pocket. Lightweight & simple, it’s not only great for airline travel & day trips by car, bus, or train, but also for storing your gear through the summer.  Features ZIPPERED TUNING / ACCESSORY POCKET Quick-access compartments keep all your tools, tuning gear, & wax safe, clean, & easily accessible. 600D Polyester Multiple Board Capacity Removable Shoulder Strap Lightly Padded Board Protection ...

With a 600D polyester construction, super smooth IXION™ skate wheels, & fully padded space for multiple boards, this bag offers so much for such an amzing price.   With sizes to fit any board from a 146cm to a 181cm, this board bag offers rugged wheelie convenience without draining your wallet. Features IXION™ WHEEL SYSTEM: Lightweight & lightning-fast skate wheels complete with custom graphics. Best of all, the wheels are easily replaceable should your bag break down on the road. 600D Polyester Multiple Board Capacity Fully Padded Board Protection Lockable, Contoured Zipper Pulls Fit TSA-Approved Locks ...

With a 600D polyester construction, super smooth IXION™ skate wheels, & fully padded space for multiple boards, this bag offers so much for such an amzing price.  With sizes to fit any board from a 146cm to a 181cm, this board bag offers rugged wheelie convenience without draining your wallet. Features IXION™ WHEEL SYSTEM: Lightweight & lightning-fast skate wheels complete with custom graphics. Best of all, the wheels are easily replaceable should your bag break down on the road. 600D Polyester Multiple Board Capacity Fully Padded Board Protection Lockable, Contoured Zipper Pulls Fit TSA-Approved Locks   ...

With a 600D polyester construction, super smooth IXION™ skate wheels, & fully padded space for multiple boards, this bag offers so much for such an amzing price.  With sizes to fit any board from a 146cm to a 181cm, this board bag offers rugged wheelie convenience without draining your wallet. Features IXION™ WHEEL SYSTEM: Lightweight & lightning-fast skate wheels complete with custom graphics. Best of all, the wheels are easily replaceable should your bag break down on the road. 600D Polyester Multiple Board Capacity Fully Padded Board Protection Lockable, Contoured Zipper Pulls Fit TSA-Approved Locks ...

When the Ambush made its debut a couple of season ago it brought with it a new compound outsole which replaced the rubber layer on the bottom. This Dyno Lite Outsole makes a 20% weight saving, withstands repeated impacts & freezing temperatures for long lasting shock absorption. Specification: Shrinkage Footprint Reduction Technology 1:1 Lasting Speed Zone Lacing System Imprint 3 Liner with Focus Cuff & Rad Pad Dyno Lite EST Optimized Outsole with B3 Gel & NEW Sleeping Bag Wishbone Upper Cuff Oversized Flex Notches Medium Flex Power UP Tongue NEW Grip LITE Backstay Total Comfort Construction Snow-Proof Internal Gusset Level 2 Moulded EVA Footbed with ESS Support Shank & Aegis Antimicrobial Coating Response: Medium  

Features: Shrinkage Footprint Reduction Technology minimises the overall size of the boot, meaning that a men’s size 10 fits like a size 10, but has the footprint of a typical size 9. The benefits are a lighter, sleeker, & shorter boot – no more toe drag. All Burton boots offer 1:1 Lasting, which means every half & full size liner gets a matching half or full size shell & outsole for a precise fit. This isn’t as common as you would think in the world of snowboard boots. Lacing Speed Zone Lacing System is lightning fast & means that you can customise the fit of the upper & lower zones in seconds. Liner Imprint 3 Liner with: Focus Cuff – Boosting heel-hold by hugging the sweet spot around your ankle. Rad Pad & pre-curved panels located where the inner laces exert the most pressure to keep your feet comfortable & secure. Velcro Heel Hold System allows Velcro backed J-bars to be added to the inner cuff for added support. Cushioning/ Traction Dyno Lite Outsole provides superior cushioning & enhanced board feel in a 20% lighter construction. The exclusive cushioning compound is specially formulated to withstand repeated impacts & freezing temperatures for long lasting shock absorption. EST Optimised soles lower your centre of gravity without sacrificing cushioning thanks to ultra-dampening B3 Gel inserts NEW Sleeping Bag is a reflective foil that transfers heat back into the foot. Level 2 Moulded EVA Footbed with ESS Support Shank & Aegis Antimicrobial Coating is a big step above the ‘throwaway’ footbeds supplied with some boots. Shell Wishbone Upper Cuff defies convention, combining power & freedom into one. With Jumper Cables (the same stuff used in high-end Burton boards) on both the medial & lateral sides you get twice the snap, rebound, & life without sacrificing the high tweak-ability of a softer boot. Oversized Flex Notches minimise shell distortion & allow for a smoother, more fluid toe & heel flex. Power UP Tongue provides greater rebound & durability & comes in three flex options. The ION uses the Medium Flex option. NEW Grip LITE Backstay is a weld construction & printed rubber backstay (running up the back of the boot) shaves weight & enhances grip. The result is more direct transfer from boot to binding & reduced fatigue. Total Comfort Construction provides a broken-in feel right out the box eliminat

...

A compact feature packed tool which is easy to use out on the mountain even with your gloves on. A fold out handle combines with the ratchet head to give you lots of power for such a small tool. Comes in red with size 2 & 3 pozidrive bits & a flat screwdriver bit, & a 4mm hex bit & a 10mm spanner. Everything you need to maintain your snowboard bindings on the slope.   ...

There’s a good reason why you will see so many Burton Cartel bindings on the hill.  They balance the ideal stiffness & comfort required by the majority of all mountain riders.  Supremely adjustable, & ergonomic like few others, the Cartel bindings are comfortable & simple to set up. They are packed with tech, & by utilising Burton’s proprietary EST channel system, will improve the performance from your Burton snowboard too.   Specification: • 30% Short Glass/ Nylon Composite Heelcups • 45% Short Glass/ Nylon Composite Baseplate • Zero Lean Dial FLAD • Single Component Living Hinge Canted Highbacks • Lightweight Reactstraps • Getta Grip Capstraps • Dual Component Smooth Glide Buckles • removable Auto CANT Sensory BED with B3 Gel • Lifetime Baseplate guarantee • Anatomical Left & Right Baseplates • Progressive flex Highbacks Flex 1-10/ soft-hard: 8

Features: Base/ Heelcups 45% Short Glass/ Nylon Composite is the second stiffest baseplate material that Burton use.  It is pretty stiff, but ideal for all conditions, & hard riding. 30% Short Glass/ Nylon Composite has a slightly more forgiving flex than some of Burton’s stiffer baseplate materials, making it ideal for all day riding, particularly for lighter/laid back riders.  Stiff enough for dropping into couloirs, soft enough for sliding rails. The Hinge is a design exclusive to Burton EST bindings.  By articulating the binding at the points of contact with the board, they allow a more forgiving, & natural range of movement of your foot in your binding.  The Hinge will add fluidity to your setup, & allow you to ride longer, harder & further. Lifetime Baseplate guarantee covering manufacturer defects for life. It’s rare to see a Burton baseplate fail, but it’s comforting to know that their quibble free replacement will be on your board before you can say ‘ Did you get that on film?’ Anatomical Left & Right Baseplates is a more costly way to design & manufacture a snowboard binding, but your left & right feet are not the same, so why shouldn’t your baseplates match your feet?   Straps: React Straps are 3D shaped ankle straps, designed to match the contour of any snowboard boot. Getta Grip Capstraps feature 3D shaping for the ultimate fit. They are constructed from ‘ Grip Fit’ rubber for excellent retention & can be used as Cap straps or Toe Straps (does anyone still ride like that?). Burton Cap Straps are some of the most universally compatible shapes, & fit perfectly over almost every boot on the market.   Highback: Living Hinge Highbacks separate the forward lean adjustment from the highback rotation, allowing an almost infinite combination of highback setup positions.  This design also saves weight over standard highback mounting designs. Zero Forward Lean Highbacks have the ability (but not the limitation) to be set up with no forward lean at all.  This is great for jibbing & rail riding, as it gets them well out of the way.  You can, of course, still crank them forward for icy all mountain conditions. FLAD Forward lean adjusters allow you to adjust the angle of your highbacks or your ‘forward lean’. A greater forward lean angle will improve your heel edge re

...

More riders have owned hardware from the Burton Mission range than any other range of snowboard equipment. Utilising their extensive knowledge & experience of snowboard hardware design, Burton continue to lead the brigade when it comes to great value, simple design high quality bindings. The Mission truly is a chameleon. It’s plenty soft enough for all but the techiest of rail lines, but stiff enough to ride 50 degree couloirs after hitting the black booter line in the park. They would be equally at home on your first set up, as they would on your tenth. Specification: • 30% Short Glass/ Nylon Composite Baseplate/ Heelcups • Single-Component Construction Canted Living Hinge Highbacks • Zero Lean Dial FLAD • Lightweight Reactstraps • Getta Grip Capstraps • Dual Component Smooth Glide Buckles • RE: Flex Auto CANT Full BED with B3 Gel • Lifetime Baseplate guarantee • Anatomical Left & Right Baseplates • Progressive flex Highbacks Flex 1-10/ soft-hard: 8

Features: Base/ Heelcups 45% Short Glass/ Nylon Composite is the second stiffest baseplate/heelcup material that Burton use.  It is pretty stiff, but ideal for all conditions, & hard riding. Lifetime Baseplate guarantee covering manufacturer defects for life. It’s rare to see a Burton baseplate fail, but it’s comforting to know that their quibble free replacement will be on your board before you can say ‘ Did you get that on film?’ Anatomical Left & Right Baseplates is a more costly way to design & manufacture a snowboard binding, but your left & right feet are not the same, so why shouldn’t your baseplates match your feet?   Straps: React Straps are 3D shaped ankle straps, designed to match the contour of any snowboard boot. Getta Grip Capstraps feature 3D shaping for the ultimate fit. They are constructed from ‘ Grip Fit’ rubber for excellent retention & can be used as Cap straps or Toe Straps (does anyone still ride like that?). Burton Cap Straps are some of the most universally compatible shapes, & fit perfectly over almost every boot on the market.   Highback: Living Hinge Highbacks add a level of for aft compliance to your binding, allowing for all day comfort as well as huge ollies, & unrivalled fluidity to your riding. separate the forward lean adjustment from the highback rotation, allowing an almost infinite combination of highback setup positions.  This design also saves weight over standard highback mounting designs. Zero Forward Lean Highbacks have the ability (but not the limitation) to be set up with no forward lean at all.  This is great for jibbing & rail riding, as it gets them well out of the way.  You can, of course, still crank them forward for icy all mountain conditions. FLAD Forward lean adjusters allow you to adjust the angle of your highbacks or your ‘forward lean’. A greater forward lean angle will improve your heel edge response. Get ‘em dialled to your riding style to ensure quick reactions from your setup, without compromising your body position. ‘ Micro’ & ‘ Dial’ adjusters are featured on Burton bindings. Both are tool free & super quick & easy to change, allowing you to experiment & get your perfect setup. Progressive Flex Highbacks are stiffer at the base, with more flex gradually built into the highback as you move c

...

Making your first turns on a snowboard could not be any easier on the Clash. V-Rocker is a continuous & defined profile that lifts the widest parts of the board at the nose & tail out of the snow. This makes the board incredibly easy to turn at slower speeds & the addition of Cruise Control, a convex base at the nose which raises the boards edges further off the snow, drastically reduces the chance of catching an edge & falling. Specification: Profile: V-Rocker with Cruise Control Setback: 25mm Flex: Soft Length CM Running Length MM Effective Edge MM Waist Width MM Rider Weightkg 151 1130 1180 247 57-75 155 1170 1220 250 61-79 158 1200 1250 252 66-84 160 1220 1270 254 70-88  

Features: The Channel mounting system is a game-changer & boasts a number of benefits. The main one for us is infinite adjustability which allows limitless stance width, angles & toe-heel

...