This is a bolt-on course for those attending our ski boot fitting course. Being able to produce custom footbeds is an essential skill if you wish to develop your career in ski boot fitting! PLEASE NOTE: If you want to attend a specific course from our course diary please contact us BEFORE making payment to check availability :o)   Course Dates Course dates can be viewed on the Boot Camp website: www.bctt.co.uk/calendar_courses.html and you can make a booking enquiry on the website. This page is to allow people that have made a booking enquiry to make their course booking payment. ...

This course is for those wanting an overview on ski & snowboard servicing. This is a non-certified course but is ideal as an introduction for the home DIY ski & snowboard tech.   PLEASE NOTE: Please contact us before making a payment, so that we can confirm availability.   COURSE CONTENT Introduction to ski & snowboard servicing Health & Safety in a winter sports workshop Ski & Snowboard construction & technology Stage 1
- Inspection Stage 2
- Preparation & Basic Repairs Stage 3
- Waxing Stage 4
- Finishing Ski & Snowbaord care & storage   FACILITIES Our workshop facility contains custom finished work areas with ski & snowboard vices. We have a floating workshop desk to allow several candidates to work safely, & to watch demonstrations in comfort without straining to see what is going on. All the core tools from irons to P-tex guns are available, along with a variety of waxes to demonstrate. The facility has a ski & snowboard base grinding machine, combined with a side edge tool for setting of side edge angles. & we have one of the few fully working & calibrated binding test machines in the UK.   Environment We want you to be comfortable, & to be honest we want to be comfortable too! So we have custom built the facility from a shell, even selecting paints that reduce eye strain (Despite the bright green colour!). We have a built in air extraction facility that is normally found in buildings with 7 rooms, to ensure that when working with fluorocarbon waxes that any fumes are extracted as quickly as possible.  The floor has been fitted with 7mm stress reducing rubber workshop matting, which is durable & reduces foot impact, & areas of this have been further enhanced with 10mm rubberised protection mats. We have fitted daylight bulbs to our suspended ceiling, which has been set at a higher height than normal to allow us to throw skis at each other without damaging the ceiling.   Other stuff Parking is available a few metres away (Park outside unit 15-16 which is our sister business Edge & Wax) & we have secure bicycle storage should you wish to ride in rather than take the car.   Course Dates Individual course are offered to fit around our workshops needs, so in the first instance please contact us to see what dates & times we have available.  



...

This course is for those wanting to prepare for employment in a ski/snowboard shop, whether in resort or the UK. Getting a job in a winter sports workshop is highly rewarding & also very difficult without any prior experience. PLEASE NOTE: If you want to attend a specific course from our course diary please contact us BEFORE making payment to check availability :o) We offer this course to give you that initial experience, & lay foundations for you to become a fully competent & much loved ski tech! This course is certificated, & we also hold records of all attendees & offer confirmations to potential employers of your attendance at no additional cost. This course can be combined with the BSBA Ski Boot Fitting 101 Course, which runs the day before this course.     COURSE CONTENT Introduction to ski techs role Health & Safety in a winter sports workshop Ski & Snowboard construction & technology New Ski Preparation Stage 1
- Inspection Stage 2
- Preparation & Repairs (inc grinding) Stage 3
- Waxing techniques & selection Stage 4
- Finishing techniques Stage 5
- Free practice of techniques & Q&A Ski & Snowbaord care & storage Conclusion & issue of certificate   FACILITIES Our workshop facility contains custom finished work areas with ski & snowboard vices. We have a floating workshop desk to allow several candidates to work safely, & to watch demonstrations in comfort without straining to see what is going on. All the core tools from irons to P-tex guns are available, along with a variety of waxes to demonstrate. The facility has a ski & snowboard base grinding machine, combined with a side edge tool for setting of side edge angles. & we have one of the few fully working & calibrated binding test machines in the UK.   Environment   We want you to be comfortable, & to be honest we want to be comfortable too! So we have custom built the facility from a shell, even selecting paints that reduce eye strain (Despite the bright green colour!). We have a built in air extraction facility that is normally found in buildings with 7 rooms, to ensure that when working with fluorocarbon waxes that any fumes are extracted as quickly as possible. Room temperature is controlled by a modern air conditioning system allowing us to drop the temperature to as low as 15 degrees or as high as 38 degrees. We also had the chairs which we carefully selected fitted with comfortable bases with decent foam, to reduce numb-bum to a minimum. The floor has been fitted with 7mm stress reducing rubber workshop matting, which is durable & reduces foot impact, & areas of this have been further enhanced with 10mm rubberised protection mats. There is a dedicated boot fitting bench with spaces for 2-5 boot fittings at one time, which are high up to allow you to see the processes being demonstrated to you without having to strain too much. We have fitted daylight bulbs to our suspended ceiling, which has been set at a higher height than normal to allow us to throw skis at each other without damaging the ceiling.   Other stuff There is a kitchen facility so you can bring your own packed lunch if you wish, & we provide tea, coffee & soft drinks throughout the training sessions. There is built in audio too, although we cant be held responsible for the trainers poor taste in music. Parking is available a few metres away (Park outside unit 15-16 which is our sister business Edge & Wax) & we have secure bicycle storage should you wis




...

If you are struggling to put ski boots on
- for whatever reason
- dont sit there & suffer & waste valuable skiing time
-


...

Wish there was a simple way to connect two or more of your existing Pipe Line Systems? The Pipe Line Connection Kit comes with everything you need to do just that! One of the Pipe Lines most important features is its flexibility & modularity. Using Bordz-Ups Connection Kit, Ski Holder Kit, Extension Kit, and/or Extension Systems allows for unlimited expansion possibilities!  

Specification Connection Kit comes with specifically engineered & molded wall mount & connector for joining two Pipe Line Ski Systems, PL-2002 (s) and/or PL2004 (s); or creating your own extension system. Hardware included.
Colour: Black.


...

The Bordz-Up 2 Ski Rack System is the professional way to store skis in an upright & safe position. They hold the skis with the assistance of gravity, & at no risk of damage to skis.

Includes:: hooks for poles to be safely stored with skis. Detail: Rail, with two ski brackets & all fittings & wall plugs Capacity: 2 pairs of skis & poles Note: Can be extended with extension packs or other PL series racks

Includes:: 2 Bordz Up ski straps Rail length: 450mm (Total length with fittings 500mm) Our Opinion So good we use these in our showroom & workshop! Is This For Me? If you want to store your skis safely & away from trouble, this is an ideal & professional solution



...

Balaclava BUFF® offers great facial & head protection. Made from high stretch  Microfibre and seamless at the neck, with a flat-lock seam on the crown of the head. Ideal to wear with protective headgear, they’re also great to wear on their own.  This is the black colour way version.   ...

Balaclava BUFF® offers great protection. Made from high stretch  Microfibre and seamless at the neck, with a flat-lock seam on the crown of the head. Obsession logo colour way. Ideal to wear with protective headgear, they’re also great to wear on their own.  This is the Obsession Logos colour way.   ...

Balaclava BUFF® offers great protection. Made from high stretch  Microfibre and seamless at the neck, with a flat-lock seam on the crown of the head. In distinctive  Octopusses colourway and print. Ideal to wear with protective headgear, they’re also great to wear on their own.    ...

If youre into downhill skiing, motorcycling or indeed anything that involves a degree of speed & need the ultimate in protection from the cold then this double layer of seamless BUFF® polyester microfibre combined with a Gore® Windstopper® fleece fabric makes Cyclone BUFF® the perfect solution for keeping out the chills. Totally windproof, with an elastic section to improve fit, the scooped shape at the front is perfect for fitting inside the neck of your jacket too. USES Cyclone BUFF® can be worn as a neckerchief, mask, balaclava, saharaine or beanie hat. TECHNICAL FEATURES Made with 100% polyester microfibre & Gore® Windstopper® fabric, Cyclone BUFF® weighs just 96g/3.4oz & measures 64cm x 24.5-26.5cm/25.3 x 9.6-10.4. Treated with Polygiene® your BUFF® headwear will remain fresh as the silver ions prevent the build up of bacteria in the fabric. One size fits most adults & teenagers. Cyclone BUFF® is machines washable & non iron & it wont fade or lose its elasticity. ...