To talk about the B 10/30 we need to know a little about the man behind the board, Mr Amplid himself Peter Bauer. Peter started snowboarding in 1984, was sponsored by Burton two years later & was named European Champion five times, World Champion four times & vice World Champion in the combined event (halfpipe, moguls, slalom & downhill) behind a certain Craig Kelly. 16 years at Burton also gave Peter the opportunity to learn his craft. Peter was heavily involved with developing & testing some of the most revolutionary snowboards of the late 80s & 90s & learned a lot from working with the best in the industry. Peter went on to do his own thing & formed Amplid in 2005. Basically Peter Bauer knows how to make a snowboard & how to ride one better than pretty much anyone else on the planet. The B 10/30 is a board he built for himself for his needs. It’s a “no-compromise freeride board that feels right in every terrain, in all snow conditions.” Specification: Profile: S Rocker Profile Description: Camber underfoot with early rise rocker in the nose Shape: Directional Setback: 15 Flex: Medium/ Stiff Length cm Effective Edge mm Waist Width mm Recommended Rider weight 163 1190 253 Not stated   Note: Die cut base colour combinations may vary & are supplied at random Profile: S Rocker by Amplid combines the stability & power of camber underfoot & through the tail with the easy floatation of early rise rocker. It’s the ideal profile for riding sketchy windblown chutes & bottomless powder in the same run.  

Features: The HEXO2 core replaces specific areas of weightier wood at the tips with feather light recycled paper honeycomb, practically eliminating swing weight. Spin to win. The rest of the core is made up with Uber Light Wood varieties which are cut, treated & aligned in a way only the Amplid factory knows. Its strength to weight ratio has scientist baffled. P.L.T Gloss UV Coating is completely crack proof, tough as old boots, shinier than Monty Burns waxed scalp & eco-friendly. It provides a high gloss lacquer finish without the cracks. Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness. Sintered GE 7.2 (7200) LS Base with Stone finish is the very same material used in record breaking race skis & snowboards. Squeezing yourself into a lycra cat suit & going gate bashing probably isnt your thing, but this almost frictionless base will guarantee that when you point straight youll be riding as fast as gravity will allow. Top sheet graphics are printed using

...

Fully padded transport for your quiver. The Board Wheelie is the ultimate travel companion for trips, when choosing one board just won?t cut it. The tough, well-padded, denim-look Cordura fabric is tough enough to handle abuse from envious airport luggage handlers & will keep your gear dry. On the interior of the bag theres an integrated board divider so that you don?t scratch-up your favourite decks topsheet.   Accessible from the outside are three large pockets, big enough to store your boots or outerwear. On the inside is a detachable laundry bag for quarantining your smalls. Compression straps on the outside allow you to buckle-down the bags contents, for extra security. The Board Wheelie runs on smoothest Urethane skate wheels. Suitable for snowboards measuring up to 166cm in length.

Features: Board Divider Urethane Skate Wheels 3 Large External Pockets Suitable for boards up to 166cm

...

New to the Creamer this winter, an S-Rocker profile ups the ante in the stakes of board control & stability. Conservative early-rise in the nose blends with a mellow 4mm camber through the majority of the running length. The result is increased control & power, but that same old Creamer float. Stomp Guard Titinal inserts run along the edge increasing the Creamer’s ability to shrug-off impacts from hidden nasties. The chances of ripping-out an edge or sustaining a board murdering core-shot are significantly reduced with Stomp Guard.   Specification: Profile: S-Rocker Profile Description: Camber underfoot with early rise rocker in the nose Shape: Tapered Directional Setback: 20 Flex: Medium Length cm Effective Edge mm Waist Width mm Recommended Rider weightkg 162 1211 251 Not stated   Profile: S Rocker by Amplid combines the stability & power of camber underfoot & through the tail with the easy floatation of early rise rocker. It’s the ideal profile for riding sketchy windblown chutes & bottomless powder in the same run.    

Features: The P10 Superlight Wood Core is the industry standard for lightweight; durable & versatile performance.   Sintruded 6.6 H.M Base with Stone Finish is ideal for riders who don’t have a waxing iron on standby every time they want to go shredding. Sintruded merges the best properties of Sintered & Extruded materials. Greece lightening on all snow conditions for weeks after waxing & rock hard too.    Magma Edge Absorber is a thin strip of rubber between the sidewall & the metal edge to iron out any unwanted bumps & vibrations.   Amplid’s Stomp Guard technology increases the force required to blow out & edge by up to 215%. Good to know should you get too well acquainted with a rock.   Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness.       Is getting off the piste & into fresh powder is your thing, but you’re reluctant to have a dedicated powder board for the rare occasions you get the goods? Is your second port of call carving on the hard pack groomers when the snow gods don’t deliver? If you’ve answerd ‘yes’ t

...

The Creamers conservative geometry means absolute freeride freedom; float in bottomless powder, grip on hardpack, slice up corduroy & blast through chop. Stomp Guard Titinal inserts run along the edge increasing the Creamer’s ability to shrug-off impacts from hidden nasties. The chances of ripping-out an edge or sustaining a board murdering core-shot are significantly reduced with Stomp Guard.   Specification:   Profile: POW Rocker Profile Description: Flat from the tail to the front inserts with early rise rocker in the nose Shape: Tapered Directional Setback: 20 Flex: Medium   Length cm Effective Edge mm Waist Width mm Recommended Rider weightkg 157 1175 249 Not stated   Profile: POW Rocker by Amplid The result is directional ever floating all mountain & backcountry board with better pop & tail control in steep terrain & for quick reactive turns.    

Features:   The P10 Superlight Wood Core is the industry standard for lightweight; durable & versatile performance.   Sintruded 6.6 H.M Base with Stone Finish is ideal for riders who don’t have a waxing iron on standby every time they want to go shredding. Sintruded merges the best properties of Sintered & Extruded materials. Greece lightening on all snow conditions for weeks after waxing & rock hard too.    Magma Edge Absorber is a thin strip of rubber between the sidewall & the metal edge to iron out any unwanted bumps & vibrations.   Amplid’s Stomp Guard technology increases the force required to blow out & edge by up to 215%. Good to know should you get too well acquainted with a rock.   Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness.       “ Most riders aim to get off piste & ride bottomless pow every day but the reality is the epic powder days a too few & far between for the majority. With that in mind it makes a lot of sense to ride a board like the Creamer, over an off-the-wall super-directional swallowtail pow-only stick. The Creamer undoubtedly wan

...

DEMO SNOWBOARDS This is a demo snowboard & we have categorised it as follows:   The Go Go is a true twin shaped snowboard for women, designed with all-mountain capability. The slightly longer & fuller tip shape provides all the lift needed to deal with deep powder & glide through sketchy conditions. A medium soft flexing Hybrid-V camber blends the responsive & lively feel of traditional camber with the deep snow performance & playfulness of rocker. The Go Gos appeal is the broad range of riding styles & abilities it accommodates. Whether its celebrating a mind-melting backcountry pillow line or you're stomping your first 180 in the park, you?ll be toasting the Go Go the next time you hit the après bars.   Specification: Profile: Hybrid-V Profile Description: Combines rocker in the middle with camber sections under each foot Shape: True Twin Setback: Centred Flex: Soft   Length cm Effective Edge mm Waist Width mm Recommended Rider weightkg 147 1177 240 Not stated     Note: Die cut base colour combinations may vary & are supplied at random   Profile: Hybrid-V; Amplid admit they weren’t pioneers of this technology but they rode it & liked it, so designed their own version. Hybrid Vs softer waist makes carves of all shapes & sizes melt together & the camber in the tips launches ollies & adds a spicy kick to turns. From beginner to pro everybody loves this camber line.    

Features: The P10 Superlight Wood Core is the industry standard for lightweight; durable & versatile performance.   Magma Edge Absorber is a thin strip of rubber between the sidewall & the metal edge to iron out any unwanted bumps & vibrations.   Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness.   P.L.T Gloss UV Coating

...

At only 2.3kg* the Amplid LAB Carbon Split is the lightest splitboard on planet earth. It’s lightweight construction & freeride geometry make easy work of long tours & big mountain lines. The raw, stealth aesthetics of uncovered carbon fibre are the only visible signs of the carbon split’s weight saving tech. Amplid’s experimental three wood BBP core (Birch, Balsa & Paulownia) & slimmer race edges strip valuable grams. The pioneering use of low viscosity aerospace epoxy improves core/laminate wetting whilst reducing excess application. Amplid’s Carbon Split exists to deliver the highest level of splitboard performance to turn-crazy skinners. Without compromise.      Specification:   Profile: S Rocker Profile Description: Camber underfoot with early rise rocker in the nose Shape: Directional Setback: 20 Flex: Medium Length cm Effective Edge mm Waist Width mm Recommended Rider weight 157 1175 249 Not stated   Note: Die cut base colour combinations may vary & are supplied at random   Profile: S Rocker by Amplid combines the stability & power of camber underfoot & through the tail with the easy floatation of early rise rocker. It’s the ideal profile for riding sketchy windblown chutes & bottomless powder in the same run.    

Features: LAB Topless Carbon Construction is a smooth, belt finished, structural laminate that eliminated the need for a heavy topsheet. Thanks to special treatment it is durable, watertight & snow phobic. It looks pretty stealthy too.   Full Carbon Matrix for ultimate weight saving   Areo-Epo  Low Viscosity Resin. This aerospace epoxy improves core/laminate wetting whilst reducing excess application. The reason? Weight saving!   Wood BBP Core is the lightest wood core money can buy. Virtually weightless Paulownia & Balsa are carefully arranged with stronger Birch to save valuable grams without sacrificing strength.   Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness.   Magma Edge Absorber is a thin strip of rubber between the sidewall & the metal edge to iron out any unwanted bumps & vibrations.   Sintered GE 7.2 (7200) LS Base with Stone Finish is the very same material used in record breaking race skis & snowbo

...

The Morning Glorys Jekyll & Hyde Geometry enables Amplid to squeeze the flotation of a conventional 175cm snowboard into a board a whole 12cm shorter. Generous nose

Dimensions & a very gradual early rise rocker from the front foot allow powder to be ridden with heavy front foot turn initiation, bringing snowboarding closer to the sensation of surfing. A stubby swallow tail with positive camber under the back foot grips icy chutes, sticks backseat landings & throws epic powder clouds into the atmosphere.    Specification: Profile: S-Rocker Profile Description: Camber underfoot with early rise rocker in the nose Shape: Tapered Directional Setback: 5 Flex: Medium Length cm Effective Edge mm Waist Width mm Recommended Rider weightkg 163 1165 260 Not stated   Note: Die cut base colour combinations may vary & are supplied at random   Profile: S Rocker by Amplid combines the stability & power of camber underfoot & through the tail with the easy floatation of early rise rocker. It’s the ideal profile for riding sketchy windblown chutes & bottomless powder in the same run.  

Features: The HEXO2 core replaces specific areas of weightier wood at the tips with feather light recycled paper honeycomb, practically eliminating swing weight. Spin to win.   The rest of the core is made up with Uber Light Wood varieties which are cut, treated & aligned in a way only the Amplid factory knows. Its strength to weight ratio has scientist baffled.   Jekyll & Hyde Geometry (JHG) is the result of experimental shapes that maximise the effective edge & square centimetres in a minimum board length. The results are unsinkable but nimble powder boards & sawn-off jib decks with huge pop.   For optimal performance when riding powder planes at high speed the Elliptic Powder Nose even keeps the tip from submarining when you can’t fully open the throttle.    P.L.T Gloss UV Coating is completely crack proof, tough as old boots, shinier than Monty Burns waxed scalp & eco-friendly. It provides a high gloss lacquer finish without the cracks.   Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness.   Sintered GE 7.2 (7200) LS Base with stone finish is the very same material used in record breaking race skis & snowboards. Squeezing yourself into a lycra cat suit & going gate bashing probably isnt your thing, but this almost frictionless base will guarantee that when you point straight youll be ridin



...

DEMO SNOWBOARDS This is a demo snowboard & we have categorised it as follows:   On the Morning Glory, riding bottomless powder becomes completely instinctive & effortless. Its Jekyll & Hyde Geometry packs the surface area of a much longer snowboard into an agile 163cm. For snowboarders used to leaning back in deep snow the centred & very balanced stance is a revelation. A unique S-Rocker accentuates the MG’s surfy-ness. Its long reverse camber nose prevents submarining in even ‘snorkel deep’ powder & the stiff, cambered tail allows incredible board control in tight terrain & recovers back-seat landings where reverse camber would wash-out. Thanks to HEXO2 construction the Morning Glory is extremely lightweight & manoeuvrable.   Specification: Profile: S-Rocker Profile Description: Camber underfoot with early rise rocker in the nose Shape: Tapered Directional Setback: 5 Flex: Medium Length cm Effective Edge mm Waist Width mm Recommended Rider weightkg 163 1165 260 Not stated   Note: Die cut base colour combinations may vary & are supplied at random Profile: S Rocker by Amplid combines the stability & power of camber underfoot & through the tail with the easy floatation of early rise rocker. It’s the ideal profile for riding sketchy windblown chutes & bottomless powder in the same run.    

Features: The HEXO2 core replaces specific areas of weightier wood at the tips with feather light recycled paper honeycomb, practically eliminating swing weight. Spin to win.   The rest of the core is made up with Uber Light Wood varieties which are cut, treated & aligned in a way only the Amplid factory knows. Its strength to weight ratio has scientist baffled.   Jekyll & Hyde Geometry (JHG) is the result of experimental shapes that maximise the effective edge & square centimetres in a minimum board length. The results are unsinkable but nimble powder boards & sawn-off jib decks with huge pop.

...

On the Morning Glory, riding bottomless powder becomes completely instinctive & effortless. Its Jekyll & Hyde Geometry packs the surface area of a much longer snowboard into an agile 163cm. For snowboarders used to leaning back in deep snow the centred & very balanced stance is a revelation. A unique S-Rocker accentuates the MG’s surfy-ness. Its long reverse camber nose prevents submarining in even ‘snorkel deep’ powder & the stiff, cambered tail allows incredible board control in tight terrain & recovers back-seat landings where reverse camber would wash-out. Thanks to HEXO2 construction the Morning Glory is extremely lightweight & manoeuvrable.   Specification: Profile: S-Rocker Profile Description: Camber underfoot with early rise rocker in the nose Shape: Tapered Directional Setback: 5 Flex: Medium Length cm Effective Edge mm Waist Width mm Recommended Rider weightkg 163 1165 260 Not stated   Note: Die cut base colour combinations may vary & are supplied at random Profile: S Rocker by Amplid combines the stability & power of camber underfoot & through the tail with the easy floatation of early rise rocker. It’s the ideal profile for riding sketchy windblown chutes & bottomless powder in the same run.    

Features: The HEXO2 core replaces specific areas of weightier wood at the tips with feather light recycled paper honeycomb, practically eliminating swing weight. Spin to win.   The rest of the core is made up with Uber Light Wood varieties which are cut, treated & aligned in a way only the Amplid factory knows. Its strength to weight ratio has scientist baffled.   Jekyll & Hyde Geometry (JHG) is the result of experimental shapes that maximise the effective edge & square centimetres in a minimum board length. The results are unsinkable but nimble powder boards & sawn-off jib decks with huge pop.   For optimal performance when riding powder planes at high speed the Elliptic Powder Nose even keeps the tip from submarining when you can’t fully open the throttle.    P.L.T Gloss UV Coating is completely crack proof, tough as old boots, shinier than Monty Burns waxed scalp & eco-friendly. It provides a high gloss lacquer finish without the cracks.   Tapered Fly Tips remove the necessity of bringing the wood core or a TPU spacer to the tips, reducing swing weight & increasing playfulness.   Sintered GE 7.2 (7200) LS Base with Stone Fini

...