The  Smart Edge 24486 is an electric side edge sharpener for skis and snowboards, to give fast, precise & professional quality sharpening of side edges. Ideal for the DIY workshop & racers alike. Thanks to its innovative design, the side edge can be prepared quickly with less effort than with conventional side edge tools, even if the side edge has been damaged. There is an easy angle setting from 90 to 85 degrees (for 0 degree to 5 degrees side edge angles). The tool comes complete with 4 course bands (item code 24487) & 3 fine bands (Item code 24488), safety mask & a cleaner brush. Supplied with 230 Volt EU cable, however being a standard kettle cable swapping for a UK cable is easy.   ...

The Holmenkol Smart Waxer 230 v waxing iron is a handy professional waxing iron with precise temperature control & constant heat through extra thick base plate. Rectangular metal surface. The flat sole on this iron allows for fast spreading of wax, & works particularly well on snowboards & of course skis. For 2014 this model upgrade, 20605 moves to a 110mm wide base plate to deal with the increasing ski widths now on the market. Power: 850 watts, with euro plug & UK earthed adapter plug Plate: Grooved Base Plate for easier spreading of wax Range: Thermostat allows precise setting for waxes, from 70 degrees to 160 degrees Celsius Accessories:

Includes:: a heat plastic iron stand to safely set aside iron while working Plate Dimensions: 144 mm x 110 mm x 8 mm deep Our Opinion A great waxing iron which is light enough to travel with, & precise enough for the home workshop. Enhanced versatility with the euro plug, complete with earthed UK adapter. Is This For Me? A ski wax iron is essential if you want to wax your own equipment. DONT consider using a domestic iron if you value your equipment, a dedicated wax iron has a much more tightly controlled thermostat to minimise the risk of delaminating your board or skis.

...

For over 80 years, Holmenkol has been dedicated to the production of the finest ski waxes available. Today, they lead the way, with the introduction of nano technology, combining sport with ground breaking science to produce a comprehensive line of waxes & tools, proven in World Cup use, & suitable for all types of winter sports enthusiasts. The Holmenkol Smart Waxer 110 volt waxing iron is a handy professional waxing iron with precise temperature control & constant heat through extra thick base plate. Rectangular metal surface. Unique special structure in the plate provides optimum wax distribution. Power: 850 watts Voltage: 110 Volts for use in USA / Canada Plug: US 3 pin style plug fitted Range: Thermostat allows precise setting for waxes, from 70 degrees to 160 degrees Celsius Accessories:

Includes:: a heat resistant tray to safely set aside iron while working Plate Dimensions: 144 mm x 96 mm x 8 mm deep Our Opinion A great waxing iron which is light enough to travel with, & precise enough for the home workshop. US Plug fitted Is This For Me?A ski wax iron is essential if you want to wax your own equipment. DON'T consider using a domestic iron if you value your equipment, a dedicated wax iron has a much more tightly controlled thermostat to minimise the risk of delaminating your board or skis.

...

The Holmenkol Synthetic Soft Brush works with all waxes, helping to add a final polish after waxing. Base: Wood base with finger groove Brush Construction: Synthetic soft nylon brush hairs

Size: 70 mm x 120 mm Our Opinion If you want to start to look after your own equipment then this is an essential part of your waxing kit. The groove around the sides of the brush means that you can get a good grip with your fingers, & helps keep them away from the edges of your skis or snowboard. You can use this brush alone, or combine it with a horsehair brush, or any of the Holmenkol brushes, to create a really good finish. Is This For Me? If you are a perfectionist looking for a fantastic finish to your bases this brush should be part of your ski & snowboard tech workshop tool kit.  

...

A high performance racing powder for application to nordic skis for the ultimate performance & glide. The Speed Base Matrix Cold is for fresh snow conditions at a temperature range of -5 to -12° C. The powder comes complete with a Holmenkol genuine Perspex 3mm wax scraper for perfect application. APPLICATION 1. Apply powder mixing with other formulas as/if required.  2. Used a ski waxing iron set at 110° C & spread the powder to impregnate the base 3. TIP
- For even better application use a ski iron fleece waxing sheet. Because you are running the iron very hot this will protect the bases! 4. Scrape the base using the included 3mm scraper 5. Brush the treatment to structure the bases  
...

A high performance racing powder for application to nordic skis for the ultimate performance & glide. The Speed Base HYBRID MID is for fresh snow conditions at a temperature range of 0 to -7° C. The powder comes complete with a Holmenkol genuine Perspex 3mm wax scraper for perfect application. APPLICATION 1. Apply powder mixing with other formulas as/if required.  2. Used a ski waxing iron set at 130° C & spread the powder to impregnate the base 3. TIP
- For even better application use a ski iron fleece waxing sheet. Because you are running the iron very hot this will protect the bases! 4. Scrape the base using the included 3mm scraper 5. Brush the treatment to structure the bases  
...

A high performance racing powder for application to nordic skis for the ultimate performance & glide. The Speed Base HYBRID WET is for fresh snow conditions at a temperature range of 0 to -2° C. The powder comes complete with a Holmenkol genuine Perspex 3mm wax scraper for perfect application. APPLICATION 1. Apply powder mixing with other formulas as/if required.  2. Used a ski waxing iron set at 120° C & spread the powder to impregnate the base 3. TIP
- For even better application use a ski iron fleece waxing sheet. Because you are running the iron very hot this will protect the bases! 4. Scrape the base using the included 3mm scraper 5. Brush the treatment to structure the bases  
...

A high performance racing powder for application to nordic skis for the ultimate performance & glide. The Speed Base HYBRID WET is for fresh snow conditions at a temperature range of 0 to -2° C. The powder comes complete with a Holmenkol genuine Perspex 3mm wax scraper for perfect application. APPLICATION 1. Apply powder mixing with other formulas as/if required.  2. Used a ski waxing iron set at 120° C & spread the powder to impregnate the base 3. TIP
- For even better application use a ski iron fleece waxing sheet. Because you are running the iron very hot this will protect the bases! 4. Scrape the base using the included 3mm scraper 5. Brush the treatment to structure the bases  
...