The Mission is pretty much the benchmark all mountain, resort binding. With over 10 years of product refinement, it remains one of the go to bindings for any shop staff across the globe. Top end design features, at a mid-range price point is a guaranteed winner, but the versatility of the Missions is its ace in the hole. Mid stiff construction, with generous amounts of cushioning & compliance make the Mission a suitable choice in almost any scenario.  Only the heaviest, hardest chargers need more.   Specification: • Single Component 30% Short Glass/ Nylon Composite Baseplate & Heelcups • Single Component Canted Living Hinge Highback • Zero Lean Dial FLAD • Reactstrap • Getta Grip Capstraps • Smoothe Glide Buckles • Removable Sensory BED • Lifetime Baseplate guarantee • Anatomical Left & Right Baseplates • Progressive flex Highbacks Flex 1-10/ soft-hard: 7

Features: Base/ Heelcups Single-Component Construction is a trickier design process to achieve the flex/response required from your binding. One piece means no joins, means great strength, & minimal weight. 30% Short Glass/ Nylon Composite has a slightly more forgiving flex than some of Burton’s stiffer baseplate/ Heelcup materials, making it ideal for all day riding, particularly for lighter/laid back riders.  Stiff enough for dropping into couloirs, soft enough for sliding rails. Lifetime Baseplate guarantee covering manufacturer defects for life. It’s rare to see a Burton baseplate fail, but it’s comforting to know that their quibble free replacement will be on your board before you can say ‘ Did you get that on film?’ Anatomical Left & Right Baseplates is a more costly way to design & manufacture a snowboard binding, but your left & right feet are not the same, so why shouldn’t your baseplates match your feet?   Straps: React Straps are 3D shaped ankle straps, designed to match the contour of any snowboard boot. Getta Grip Capstraps feature 3D shaping for the ultimate fit. They are constructed from ‘ Grip Fit’ rubber for excellent retention & can be used as Cap straps or Toe Straps (does anyone still ride like that?). Burton Cap Straps are some of the most universally compatible shapes, & fit perfectly over almost every boot on the market.   Highback: Single-Component Construction is a trickier design process to achieve the flex/response required from your binding. One piece means no joins, means great strength, & minimal weight. Canted Highbacks are a more ergonomic shape than traditional ‘straight up’ highbacks.  Your legs angle inwards toward your waist when you ride, so canting your highbacks to match this angle seems like an obviously beneficial step. Living Hinge Highbacks separate the forward lean adjustment from the highback rotation, allowing an almost infinite combination of highback setup positions.  This design also saves weight over standard highback mounting designs. Zero Forward Lean Highbacks have the ability (but not the limitation) to be set up with no forward lean at all.  This is great for jibbing & rail riding, as it gets them well out of the way.  You can, of course, still crank them forward for icy all mountain conditions. FLAD Forward lean adjusters allow you t

...

The Mission is pretty much the benchmark all mountain, resort binding. With over 10 years of product refinement, it remains one of the go to bindings for any shop staff across the globe. Top end design features, at a mid-range price point is a guaranteed winner, but the versatility of the Missions is its ace in the hole. Mid stiff construction, with generous amounts of cushioning & compliance make the Mission a suitable choice in almost any scenario.  Only the heaviest, hardest chargers need more.   Specification: • Single Component 30% Short Glass/ Nylon Composite Baseplate & Heelcups • Single Component Canted Living Hinge Highback • Zero Lean Dial FLAD • Reactstrap • Getta Grip Capstraps • Smoothe Glide Buckles • Removable Sensory BED • Lifetime Baseplate guarantee • Anatomical Left & Right Baseplates • Progressive flex Highbacks Flex 1-10/ soft-hard: 7

Features: Base/ Heelcups Single-Component Construction is a trickier design process to achieve the flex/response required from your binding. One piece means no joins, means great strength, & minimal weight. 30% Short Glass/ Nylon Composite has a slightly more forgiving flex than some of Burton’s stiffer baseplate/ Heelcup materials, making it ideal for all day riding, particularly for lighter/laid back riders.  Stiff enough for dropping into couloirs, soft enough for sliding rails. Lifetime Baseplate guarantee covering manufacturer defects for life. It’s rare to see a Burton baseplate fail, but it’s comforting to know that their quibble free replacement will be on your board before you can say ‘ Did you get that on film?’ Anatomical Left & Right Baseplates is a more costly way to design & manufacture a snowboard binding, but your left & right feet are not the same, so why shouldn’t your baseplates match your feet?   Straps: React Straps are 3D shaped ankle straps, designed to match the contour of any snowboard boot. Getta Grip Capstraps feature 3D shaping for the ultimate fit. They are constructed from ‘ Grip Fit’ rubber for excellent retention & can be used as Cap straps or Toe Straps (does anyone still ride like that?). Burton Cap Straps are some of the most universally compatible shapes, & fit perfectly over almost every boot on the market.   Highback: Single-Component Construction is a trickier design process to achieve the flex/response required from your binding. One piece means no joins, means great strength, & minimal weight. Canted Highbacks are a more ergonomic shape than traditional ‘straight up’ highbacks.  Your legs angle inwards toward your waist when you ride, so canting your highbacks to match this angle seems like an obviously beneficial step. Living Hinge Highbacks separate the forward lean adjustment from the highback rotation, allowing an almost infinite combination of highback setup positions.  This design also saves weight over standard highback mounting designs. Zero Forward Lean Highbacks have the ability (but not the limitation) to be set up with no forward lean at all.  This is great for jibbing & rail riding, as it gets them well out of the way.  You can, of course, still crank them forward for icy all mountain conditions. FLAD Forward lean adjusters allow you t

...

The Moto is a long standing boot in the Burton line is the biggest selling snowboard boot in the world. With Speed Zone Lacing that independently fastens the top & lower sections of the boot & the lightweight Dyno LITE outsole that offers excellent shock absorption you cannot get a better boot for the price. That’s why the Moto has been the world’s best-selling snowboard boot for the last 13 years. Specification: Shrinkage Footprint Reduction Technology 1:1 Lasting Speed Zone Lacing System Imprint 1 Liner with Integrated Lacing Dyno Lite Outsole with Sleeping Bag Soft Flex Tongue Snow-Proof Internal Gusset Level 1 Moulded EVA Footbed Response: Playful-Medium  

Features: Shrinkage Footprint Reduction Technology minimises the overall size of the boot, meaning that a men’s size 10 fits like a size 10, but has the footprint of a typical size 9. The benefits are a lighter, sleeker, & shorter boot – no more toe drag. All Burton boots offer 1:1 Lasting, which means every half & full size liner gets a matching half or full size shell & outsole for a precise fit. This isn’t as common as you would think in the world of snowboard boots. Lacing Speed Zone Lacing System is lightning fast & means that you can customise the fit of the upper & lower zones in seconds. Liner Imprint 1 Liner with Integrated Lacing & inner lace lock is heat mouldable for a customised fit. Cushioning/ Traction Dyno Lite Outsole provides superior cushioning & enhanced board feel in a 20% lighter construction. The exclusive cushioning compound is specially formulated to withstand repeated impacts & freezing temperatures for long lasting shock absorption. NEW Sleeping Bag is a reflective foil that transfers heat back into the foot. Level 1 Moulded EVA Footbed offers lightweight & long-lasting shock absorption. Shell Soft Flex Tongue helps to provide the playful to medium response. Total Comfort Construction provides a broken-in feel right out the box eliminating the break-in period for a consistent fit & feel from day 1-100. Snow-Proof Internal Gusset is a feature found on all Burton boots. Attached to the tongue, the gusset completely seals the lower zone of the boot, keeping feet warm & dry.   If you’re reading this then you are quite probably looking for your first pair of snowboard boots. If that’s the case then you have found the quintessential first snowboard boots. They are low cost, progression friendly & good quality. It’s the reason that the majority of snowboarders own, have owned, or at the very least know someone who has had a pair of Moto’s. You can’t argue with that kind of popularity.   Is it for me? Perfect first boots for beginners through intermediate & great for those on a budget.  

...

The Process has a true-twin shape & softer flex, making it ideal for park riding as well as making the most out of resort terrain. The Flying-V profile works extremely well for freestyle riding & provides increased float in powder over its Camber profile brother, should you be luckily enough to score some fresh tracks. Specification: Profile: Flying V Setback: 0 Flex: Mid Soft   Length CM Running Length MM Effective Edge MM Waist Width MM Rider Weightkg 155 1155 1195 251 61-79 157 1175 1215 252 61-79 159 1195 1235 255 66-84 162 1225 1265 257 75-93 NOTE: DIE-CUT BASE COLOUR COMBINATIONS MAY VARY FROM THOSE SHOW  

Features: The Channel mounting system is a game-changer & boasts a number of benefits. The main one for us is infinite adjustability which allows limitless stance width, angles & to

...

The Ritual is comparable to the men’s Burton Ambush boots but has been completely designed & engineered from the ground up to suit the needs specific to female snowboarders. Lightweight & durable, the Ritual also boasts an Imprint 2 Liner with Rad Pad, Plush Cuff, DRYRIDE Heat Cycle Lining & Sleeping Bag reflective foil to keep your feet secure & warm all day long. Specification: Women’s Specific True Fit Design 1:1 Lasting Speed Zone Lacing System Imprint 3 Liner with NEW DRYRIDE Heat Cycle Lining, Focus Cuff, Plush Cuff 1.0 & Rad Pad Dyno Lite EST Optimized Outsole with B3 Gel & Sleeping Bag Articulating Cuff NEW Grip LITE Backstay Soft Flex Power UP Tongue Total Comfort Construction Snow-Proof Internal Gusset Level 2 Moulded EVA Footbed with ESS Support Shank & Aegis Antimicrobial Coating Response: Playful
- Medium

Features: Women’s Specific True Fit Design means that every element is designed & engineered for the way women ride. Rather than borrowing from the men’s line & giving it the ‘shrink it & pink it’ treatment Burton Women’s boots are built from the ground up. When it fits right, it rides better. All Burton boots offer 1:1 Lasting, which means every half & full size liner gets a matching half or full size shell & outsole for a precise fit. This isn’t as common as you would think in the world of snowboard boots. Lacing Speed Zone Lacing System is lightning fast & means that you can customise the fit of the upper & lower zones in seconds. Liner Imprint 3 Liner with: The breathable NEW DRYRIDE Heat Cycle inner liner material which utilises interwoven thermally activated carbon fibre to capture, radiate & reflect body heat inward, while wicking heat-robbing moisture outward for all day comfort. Focus Cuff – Boosting heel-hold by hugging the sweet spot around your ankle. Plush Cuff 1.0 is a combination of medial & lateral neoprene stretch zones that hugs your calf like no other liner. A super soft fur lining provides premium comfort to compliment the premium performance. Rad Pad are pre-curved panels located where the inner laces exert the most pressure to keep your feet comfortable & secure. Velcro Heel Hold System allows Velcro backed J-bars to be added to the inner cuff for added support. Cushioning/ Traction Dyno Lite Outsole provides superior cushioning & enhanced board feel in a 20% lighter construction. The exclusive cushioning compound is specially formulated to withstand repeated impacts & freezing temperatures for long lasting shock absorption. EST Optimised lowers your centre of gravity without sacrificing cushioning thanks to ultra-dampening B3 Gel inserts NEW Sleeping Bag is a reflective foil that transfers heat back into the foot. Level 2 Moulded EVA Footbed with ESS Support Shank & Aegis Antimicrobial Coating is a big step above the ‘throwaway’ footbeds supplied with some boots. Shell For greater rebound & durability, the Power UP Tongue is a dual density construction. The Ritual features the softest, & most forgiving of the three Power UP Tongue options. An Articulating Cuff allows the upper & lower zones of the boot to flex independently. This minimises shel


...

Burton Snowboard Tuning Vices offer  a safe & fast way to prep your board, featuring vertical & horizontal clamping options for working on the bases or edges. The vices supplied as a pair mount to any table. Anti slip grippers ensure your board stays put whilst tuning.   ...

The Social offers more bang for your buck with some great tech features & as such it has become an extremely popular board for a whole host of female riders. The true twin shape & flex makes it popular with park riders, the Flat Top profile, which is flat in the middle with rocker at the tips, improves its powder-riding abilities & the soft flex with Scoop tip & tail shaping makes it progression friendly. Specification: Profile: Flat Top Setback: 0 Flex: Soft Length CM Running Length MM Effective Edge MM Waist Width MM Rider Weightkg 142 1030 1075 240 43-54 147 1080 1125 242 52-68 151 1110 1160 245 57-73  

Features: The Channel mounting system is a game-changer & boasts a number of benefits. The main one for us is infinite adjustability which allows limitless stance width, angles & toe-heel options. Others include & 3 year warranty on all boards that feature the channel, half the set-up time, compatibility with other leading binding brands, not just Burton & it allows for a lower board profile under the bindings (apparent on boards featuring Squeezebox & Filet-O-Flex). A Twin Shape is perfectly symmetrical for a balanced ride that’s equally versatile when riding regular or switch. Flat Top Profile features a flat section between the bindings for stability & continuous edge control. The

...

The Stiletto is a great binding choice for your first setup away from the rental shops.  It’s a soft binding, which makes it forgiving. It shares design features with its bigger sisters &, as always with Burton bindings,   the fit is great with almost any snowboard boot on the market.  Lifetime guarantee on the baseplates, & highly adjustable forward lean options, make this a very attractive binding at this price point.   Specification: • Lightweight bombproof polycarbonate Baseplate • Zero Lean Dial FLAD • Single Component Canted Highbacks • Lushstrap • Primo Capstrap • Smoothglide Buckles • Full BED cushioning • Lifetime Baseplate guarantee • Anatomical Left & Right Baseplates • Progressive flex Highbacks Flex 1-10/ soft-hard: 3

Features: Base/ Heelcups Lightweight, Bombproof Polycarbonate baseplates are laid back, buttery & playful. Ideal for park riders, lighter riders, or those looking to cruise. Lifetime Baseplate guarantee covering manufacturer defects for life. It’s rare to see a Burton baseplate fail, but it’s comforting to know that their quibble free replacement will be on your board before you can say ‘ Did you get that on film?’ Anatomical Left & Right Baseplates is a more costly way to design & manufacture a snowboard binding, but your left & right feet are not the same, so why shouldn’t your baseplates match your feet?   Straps: Lush Strap ankle straps are 3D shaped to perfectly match the shape of your snowboard boots, & feature a hidden core of EVA padding for unparalleled comfort. Primo Capstraps are 3D shaped toe cap straps, featuring grippy rubber for great foot retention. Burton Cap Straps are some of the most universally compatible shapes, & fit perfectly over almost every boot on the market. Smoothglide Buckles are regarded as some of the most consistent, reliable & easy buckles available for snowboard bindings. Highback: Single-Component Construction is a trickier design process to achieve the flex/response required from your binding. One piece means no joins, means great strength, & minimal weight. Canted Highbacks are a more ergonomic shape than traditional ‘straight up’ highbacks.  Your legs angle inwards toward your waist when you ride, so canting your highbacks to match this angle seems like an obviously beneficial step. Zero Forward Lean Highbacks have the ability (but not the limitation) to be set up with no forward lean at all.  This is great for jibbing & rail riding, as it gets them well out of the way.  You can, of course, still crank them forward for icy all mountain conditions. FLAD Forward lean adjusters allow you to adjust the angle of your highbacks or your ‘forward lean’. A greater forward lean angle will improve your heel edge response. Get ‘em dialled to your riding style to ensure quick reactions from your setup, without compromising your body position. ‘ Micro’ & ‘ Dial’ adjusters are featured on Burton bindings. Both are tool free & super quick & easy to change, allowing you to experiment & get your perfect setup. Discs/hardware: Re: Flex baseplate construction opens up your choice of snowboard to the market, while still retaining Burton bindings.  C

...