Arcteryx  Venta  Series are a range of  weather resistant softshell garments. The SV stands for Severe Weather. Insulated, windproof, breathable gloves for active use, on & off the mountains. Using WINDSTOPPER® technology to protect against the elements, these insulated gloves breathe at a high rate, keeping the hands drier & warmer during active use. A layer of Polartec® Thermal Pro® fleece traps heat, aggressive articulation provides exceptional digital dexterity, supple leather reinforces the palm & fingers, & an adjustable trim-fit cuff reduces layering bulk. Polartec® Alpha® is a lofty fleece knit insulation that is specifically designed to be combined with air permeable fabrics that are useful during high aerobic activities. Highly stable insulation providing excellent warmth Knitted insulation does not pull apart & can be combined with highly air permeable fabrics Quick drying Venta is a windproof, breathable softshell in differing degrees of thermal efficiency, with less stretch than Gamma series. It is also highly water-resistant without a waterproof membrane, to keep bulk to a minimum. FULL FEATURE LIST Technical Features Moisture-resistant outer face fabric Snow-shedding Windproof Breathable Insulated Construction DWR finish (Durable Water Repellent) helps repel water from fabric surface Soft, brushed lining adds light insulation Seam-free fingertips improve dexterity Cut (Patterning) Anatomical shaping for fit & comfort Articulated patterning for unrestricted mobility Cuff & Sleeves Configuration Adjustable slim-fit cuff with Velcro® closure Reinforcements Leather reinforced palm & thumb Accessory Features Leather pull-tab with clip-in loop Finger-mounted clip-in loop enables gloves to be attached to a carabiner with finger-tips facing up, eliminating snow-fill Materials N70p WINDSTOPPER® 3L (hi-loft) Polartec® Thermal Pro® Velvet Lezanova Leather   ...

A high quality lightweight, stretch beanie made from Merino wool & Spandex. This is the blood red colour option. This lightweight stretch beanie is made with warm & non-itching Merino Wool/ Spandex blend fabric, & features vertical edge detailing with six dart construction for comfort. MATERIALS MAPP Merino Wool 95% Wool 5% Spandex   ...

A high quality lightweight, stretch beanie made from Merino wool & Spandex. This is the white colour option with silver  Arc Teryx logo detailing. This lightweight stretch beanie is made with warm & non-itching Merino Wool/ Spandex blend fabric, & features vertical edge detailing with six dart construction for comfort. MATERIALS MAPP Merino Wool 95% Wool 5% Spandex   ...

Newly redesigned with enhanced textile & feature set. Anatomically superior, advanced waterproof GORE-TEX® glove, engineered using our new Tri-Dex™ Technology; ideal to be used in the backcountry. Arc Teryx used all of their know-how & technology to produce the most waterproof, fitted glove on the market. Watch the video (On our website
- its below) to show how much effort goes into producing one pair of these gloves, which is why each year only a limited number are made.   Our revolutionary Tri-Dex™ Technology patterns each finger individually for exceptional dexterity & a precision touch. N80p-X GORE-TEX® fabric has a durable outer surface to increase longevity. The inner glove liner is constructed of high loft fleece insulation that maximizes warmth & is removable for a quicker dry time. Leather reinforcement areas on the palm & fingers are durable & long lasting. An external wrist cinch with ladder lock buckle adjusts easily & is secure. Removable wrist leashes prevent gloves from dropping when not in use. A wide gauntlet fits easily over any jacket sleeve. Master of Alpine Situations The Alpha SV Glove is built for the most extreme conditions. Removable wrist leashes prevent a critical loss, leather reinforcements provide protection from rock & secure grip on ice tools, wide gauntlet fits over any insulated jacket sleeve & a one handed wrist cinch secures glove position. Tri-Dex™ Technology Tri-Dex™ Technology uses a three-lobe pattern to individually map a three-dimensional shape for each digit. An unparalleled advancement in dexterity, the technology also uses micro seam technology to reduce bulk, enhance comfort. Durability N80p-X GORE-TEX® fabric has exceptional abrasion resistance. Engineered to deliver the highest level of windproof waterproof/breathable protection, this smooth surfaced textile readily sheds precipitation, ice & reduces overall wear & tear. Leather reinforced palms & fingers are durable & long lasting. Liners The inner fleece liner is a hi-loft Polartec® Wind Pro® textile with high wind resistance, low stretch, exceptional warmth & breathability to keep working hands dry in cold environments. Removable liners are easy care: remove them for drying; machine wash to reduce odour. Velcro® interface holds the liner in position, maximizing comfort & dexterity. FULL FEATURE LIST Technical Features Waterproof Snow-shedding Windproof Breathable Insulated Durable Construction Micro-seam allowance (1.6 mm) reduces bulk & weight DWR finish (Durable Water Repellent) helps bead water from fabric surface Tiny GORE® seam tape (11 mm) Seam-free fingertips improve dexterity Tri-Dex™ Technology— Innovative, three-lobe construction technique used for unparalleled finger dexterity Design One-hand adjustable drawcords Glove shell & lining incorporate identical shaping, for an unparalled anatomical fit Patterning Anatomical shaping for fit & comfort Cuff & Sleeves Configuration Laminated cuffs External adjustable wrist cinch Removable wrist leash Reinforcements Leather reinforced palm, thumb & fingers Accessory Features Removable fleece glove liner
...

The  Arc’teryx  Andessa womens jacket has the enhanced GORE-TEX fabric combine with Coreloft™  Down Contour Construction designed to keep you as warm & dry as possible with windproof & breathable materials.  This means the jacket keeps you warm during those cold days but still allows the jacket to be breathable.  This is Arcteryx flagship womens ski jacket, with unique Coreloft™  Down Composite Mapping, where the down insulated layer is optimised depending on the various hot spots & cold spots of the human body, to ensure warmth where it is needed, & breathability in hotter zones. The result, when combined with 3 layer Gore Tex is one of the driest & warmest functional ski jackets on the market. JACKET

Specification Technical Features Waterpoof
- Thanks to the Gore Tex 3-Layer fabric with DWR water repellent treatment & micro sealed seams Windproof
- The 3-Layer Gore Tex allows hot air out whilst blocking cold air from coming in Breathable
- The jacket is highly breathable despite the down insulated layer Insulated
- the Down Contour Construction with Down Composite Mapping means that insulation is correctly shaped for the skier, & is where it is needed Durable
- Arcteryx is renowned for durability & this jacket is now exception, with a light weight but highly durable outer shell, & premium zips throughout   Construction Micro-seam allowance (1.6 mm) reduces bulk & weight DWR finish (Durable Water Repellent) helps repel water from fabric surface GORE-TEX® three-layer construction Taped seams for added weatherproofness Patent-pending Down Contour Construction & Down Composite Mapping technologies maximise insulation benefits Down Composite Mapping strategically places Coreloft™ synthetic insulation in areas where moisture may build up & down in areas for maximum warmth Anatomical shaping for fit & comfort Articulated patterning for unrestricted mobility e 3D Ergonomic 3-Dimensional patterning for enhanced comfort & mobility Gusseted underarms   Hood Configuration Laminated brim Adjustable hood drawcords Insulated, helmet compatible Drop Hood™ Collar Configuration Insulated collar Chin guard Zips Configuration Pit zips for easy venting Water Tight™ Vislon front zip Wind flap with snap closures Micro webbing zip pulls Cuff & Sleeves Configuration Easy-sliding sleeve lining wont bind on other layers Laminated Velcro® cuff adjusters Hem Configuration Adjustable hem drawcord Pocket Configuration Two hand pockets with Water Tight™ zippers Internal chest pocket with zip Internal mesh dump pocket Lower sleeve pocket with laminated zip Note: The Water Tight™ zippers are highly water resistant, but not waterproof. We do not recommend keeping items in your pockets that may be damaged by moisture Snowsport Features Detachable powder skirt with gripper elastic & snap closure Materials Details N40p GORE-TEX® fabric with 3L tricot technology with Coreloft™ insulation OUR OPINION If you’re looking for the highest quality technical ski or snowboard jacket that keeps you warm during those cold days at the top of the mountain but still means that you can stay cool when you get to






...

This trim hybrid hoody is designed as an active-use insulation layer, providing vital core warmth with liberal mobility & breathability. Lightweight & compressible, the Atom LT  Hoody features  Coreloft™ insulation.  Thalo  Blue. The side panels & underarms feature Polartec® Power Stretch® with Hardface® Technology, delivering stretch mobility & breathability. A wind & moisture resistant outer shell extends st&-alone usability. ESSENTIAL PIECE Fact: Every person at Head Office owns at least one Atom LT; most of the women have two. The reason: Coreloft™ insulation inside a light taffeta shell. All the comfort of a sleeping bag, but it feels weightless. WINDSHELL The benefit of taffeta fabrics is their light, airy nature with an ability to turn aside wind. The Atom series have a taffeta outer lining that is treated with DWR (durable water resistant) finish to give them a long-lasting ability to shed moisture. In light precipitation, the Atom LT can be worn as an outer layer. NO SWEAT Mid layers that can function as outer layers have varied degrees of weather shedding capability; they also have varied degrees of moisture management. In addition to being made from breathable Coreloft™ insulation, the Atom LT has breathable side panels of Polartec® Power Stretch® with Hardface™ technology to help regulate temperature during exertion. PACK LIGHT Highly compressible, Atom pieces pack down into a tiny parcel of stored warmth. Store the jacket inside its own pocket, or tuck it into a sleeve or inside the hood if you are not restricted by space. A quick shake restores the original loft, time & again.   ...

  Arcteryx most featured & rugged Whiteline GORE-TEX® Pro jacket is at home with huge, technical big mountain skiing & snowboarding. The highly breathable GORE-TEX® Pro is engineered for intense work/rest cycles. The new membrane works hard to regulate temperature & moisture during climbs & descents. Pockets have to be in the right places. The Caden has internal zippered hand pockets, internal mesh dump pocket, two chest pockets & a sleeve pocket. Keeps everything where it needs to be. Deep snow & weather are not a problem. Arcteryx alpine pedigree comes through in the expedition fit with e 3D, the most articulated fit Arc Teryx make to accommodate big moves & maximum winter layers. The powder skirt with Slide n Loc™ attachments fit compatible pants, Water Tight™ pit zippers & a helmet compatible Storm Hood™ seal out the weather so you can focus on turns & terrain.   JACKET FEATURES HELMET COMPATIBLE STORMHOOD™ The Arcteryx helmet compatible Stormhood™ is designed to provide the ultimate protection in cold or wet weather. The laminated brim & hood adjusters secure tightly & deliver full coverage without restricting movement or visibility: Laminated brim Adjustable hood cinch cords Tall collar for full coverage ARCTERYX FIT GUIDE
- E3D Ergonomic 3-Dimensional (e 3D) patterning brings an additional level of articulation to provide enhanced range-of-motion in our Trim, Athletic, & Expedition fit categories. The application of e 3D patterning allows for enhanced mobility for sport-specific activities in challenging environments.   ARCTERYX FIT GUIDE
- XPD
- EXPEDITION FIT Expedition fit is suitable for winter / extreme conditions. The larger cut accommodates multiple layers without binding or restricting movement. Our maximum fit with room for a base layer plus multiple, thick cold weather mid-layers. Technical Features Waterproof
- Thanks to the Gore Tex Pro Shell fabric Windproof
- Again the Gore-Tex Pro Shell fabric blocks cold wind coming in whilst allowing hot are to breath out Breathable
- Keeps you dry & temperatures level on the mountain Lightweight
- The lightest genuine waterproof, windproof & breathable fabric yet Durable
- Manages to still have Arc Teryx legendary durability & does not feel like a bin liner! Construction Micro-seam allowance (1.6 mm) reduces bulk & weight DWR finish (Durable Water Repellent) helps repel water from fabric surface Taped seams for added weatherproofness Laminated construction eliminates bulk & stiffness Cut (Patterning) Anatomical shaping for fit & comfort Articulated patterning for unrestricted mobility Articulated elbows Gusseted underarms Expedition with e 3D fit for easy layering, svelte profile & functional articulation Hood Configuration Helmet compatible Storm Hood™ Laminated brim Adjustable hood draw cords Zips Configuration Pit zis for easy venting Zipper garages to protect zipper closure from snow & rain Water Tight™ Vislon front zip with chin guard Micro webbing zipper pulls Cuff & Sleeves Configuration Die-cut Velcro® cuff adjusters reduce bulk, & wont catch or tear off Hem Configuration Drop back hem Adjustable hem draw cord Laminated hem Pocket Configuration







...

The Arcteryx Cerium LT Mens Hoody is a streamlined, lightweight down hoody filled with 850 white goose down. This backcountry specialist hoody is intended as a mid layer or standalone piece in cool, dry conditions. Putting Down Where It Counts Strategic placement of synthetic & down insulation has Coreloft™ synthetic insulation, that retains warmth when wet, placed along the hem, collar, sleeves & underarms— areas prone to contact with moisture. 850 fill European Goose down lines the core & sleeves where warmth is most needed. Sealing the World Out Both the adjustable low profile down insulated Storm Hood™ & adjustable hem drawcord make sure the drafts stay outside, so you can do the same. DWR finish repels moisture so dont be afraid of being caught in light precipitation Backcountry Warmth Streamlined & lightweight, the Cerium LT down hoody is filled with 850 white goose down, intended to act as a mid-layer under a shell, or a standalone piece for cold, dry conditions. A three part sleeve moves freely & keeps a low profile. Weight Savings Specialized construction: light, elasticized hem; three part sleeve; binding finishes & superior craftsmanship are the thoughtful attention to detail that allows the use of stronger fabrics that can stand up to everyday use. This is a piece you will want to live in. As an alternative to down fill insulation, we also offer synthetic fill products, such as the Atom LT Hoody. FULL FEATURE LIST Technical Features Moisture-resistant outer face fabric Breathable Insulated Great warmth-to-weight ratio Lightweight Compressible & packable Wind resistant Construction DWR finish (Durable Water Repellent) helps bead water from fabric surface Down Composite Mapping strategically places Coreloft™ synthetic insulation in areas where moisture may buildup. Hood Configuration Adjustable hood drawcords Insulated Storm Hood™ Zippers & Fly Configuration Full front zip with chin guard Corded zipper-pulls reduce noise & are easy to grab Cuff & Sleeves Configuration Elastic cuffs Pocket Configuration Two hand pockets with zippers Integrated Features

Includes:: stuff sack MATERIALS Coreloft™ 80 g/m² insulation. Made with highly crimped multi-denier siliconized polyester yarn, this lightweight, breathable, & thermally efficient, 100% polyester staple fibre it is very compressible & has excellent loft retention. Airetica™—100% nylon, 34 g/m². Tightly constructed, high tenacity, 20x 10 denier ripstop nylon with a smooth h&. 850 fill European goose down CARE Machine wash in warm water. Do not use fabric softener. Front load washing machine recommended (use a mesh bag for top loading machines). Tumble dry on low heat with tennis balls. Do not iron.

...

This Arcteryx Cerium women’s Jacket is an all-Round. Streamlined, lightweight, jacket filled with 850 white goose down. This backcountry specialist is intended as a mid-layer or standalone piece in cool, dry conditions. This jacket is a minimalist design for maximum performance, Created at the highest of levels & craftsmanship, aimed at comfort & all weathers. It’s lightweight & durable enough to wear every day. With its high warmth to weight ratio, it sticks to the body trapping heat to the core & is highly compressible. DWR finish repels moisture so dont be afraid of being caught in light precipitation. Jacket Specification  Technical Features Moisture-resistant outer face fabric Breathable Insulated Great warmth-to-weight ratio Lightweight Compressible & packable Wind resistant Construction DWR finish (Durable Water Repellent) helps repel water from fabric surface Down Composite Mapping strategically places Coreloft™ synthetic insulation in areas where moisture may buildup & down in areas for maximum warmth Zippers & Fly Configuration Full front zip with chin guard Corded zipper-pulls reduce noise & are easy to grab Hem Configuration Elasticized rear hem seals out draft Pocket Configuration Two hand pockets with zippers Integrated Features

Includes:: stuff sack MATERIALS Coreloft™ 80 (80 g/m²) insulation. Made with highly crimped multi-denier siliconized polyester yarn, this lightweight, breathable, & thermally efficient, 100% polyester staple fibre it is very compressible & has excellent loft retention. Coreloft™ 100 (100 g/m² ) insulation. Made with highly crimped multi-denier siliconized polyester yarn, this lightweight, breathable, & thermally efficient, 100% polyester staple fiber it is very compressible & has excellent loft retention. 850 fill European grey goose down Airetica™—100% nylon, 34 g/m². Tightly constructed, high tenacity, 20x 10 denier ripstop nylon with a smooth h&. CARE Machine wash in warm water (30°C) on gentle wash cycle. Do not use fabric softener. Front load washing machine recommended (use a mesh bag for top loading machines). Rinse twice. Tumble dry on low heat with tennis balls or sock balls. Drying time may take up to three hours. Do not iron. Store unstuffed in a dry place. OUR OPINION This is a great all round jacket that can be used as a mid-layer or standalone piece. With its trim fit & streamline design it can be used in multiple ways to help with all types of weather in the mountains.

...

This can be worn as a standalone piece or as effective mid layer. This is a performance fleece jacket with its simple, elegant design & relaxed fit. It’s been engineered to offer versatile to be comfortable & warm. This Arcteryx Covert Cardigan is a performance fleece jacket, with its stylish design it offers a cut that is clean & casual with fabric that stays warm & cosy. This is a great all round fleece that shines in a wide variety of weathers. The fleece is a trim fit patterned with lower volume to reduce bulk. This can be used as a base layer or an down filled mid layer. Jacket Specification  Technical Features Breathable ultra quick-drying Construction Flatlocked seams lie flat for added comfort Cut / Patterning No-lift gusseted underarms Zippers & Fly Configuration Full front zip Cuff & Sleeves Configuration Stretch-knit cuffs Pocket Configuration Laminated sleeve pocket with laminated zip Two hand pockets with laminated zippers MATERIALS Alpenex Heathered™ 100% Polyester. A brushed back knit polyester fabric that looks like a wool sweater, but it is engineered to provide the versatility, warmth & comfort of a technical fleece. CARE Machine wash in cold water. Hang to dry. Do not use fabric softener. Do not iron. OUR OPINION This is a great performance level fleece that looks & feels great. If you’re looking for a fleece that looks stylish but still give you the performance you want then this is the fleece for you.   ...