Data is a British-manufacturing company; most of their materials are sourced from within Britain. Founded in 1978 it is now the biggest supplier and manufacturer of snow sport waxes in Britain. Its success is based on value for money. A DataWax Get-a-Grip is an easy to use, affordable edging tool that is very portable so you can sharpen your edges in just a few minutes. This tool has the option of either 88° or 90° angles so that you can tune your edges for exactly what you need. Comes boxed with instructions and a 5 inch file. How To Use 1) Select the edge angle you require. 2) Orientate the Get-a-Grip with the number matching your selected angle nearest to your ski or board. 3) Hold the Get-a-Grip firmly in your dominant hand. 4) Place the guide on the edge with the plastic flush against the base. 5) Ensure the file is facing the edge so that it cuts. 6) Pull the guide towards you, running in long smooth strokes, keeping the pressure even and the plastic guide flat against the base. 7) Repeat until the edge is sharp along the whole length of the ski or board.
A world cup standard traditional file guide for use with a file guide clamp (not included). This model is made from durable and lightweight aluminium with a smooth finish. This is the 89 degree (1 Degree) model. A file clamp (part number 24481) is available separately.
The Wintersteiger Gummi Stone is a rubber grit block for safe detuning of the tips and tails of skis and snowboards. It can also be used to remove rust and burrs from edges. Material: Rubber block with grit treatment Packaging: Comes in cardboard sleeve for protection Our Opinion One of the handy tools in the workshop, use a gummi stone to remove rust and burrs from edges before tuning. Tackles case hardened areas well. Then also use to detune the tips and tails of skis and of boards to prevent catching an edge when initiating or finishing turns. Is This For Me? A handy tool to have in the workshop or even the backpack on the slopes.
A world cup standard traditional file guide for use with a file guide clamp (not included). This model is made from durable and lightweight aluminium with a smooth finish. This is the 86 degree (4 Degree) model. A file clamp (part number 24481) is available separately.
A world cup standard traditional file guide for use with a file guide clamp (not included). This model is made from durable and lightweight aluminium with a smooth finish. This is the 87 degree (3 Degree) model. A file clamp (part number 24481) is available separately.
The Wintersteiger Discman Ceramic Edge Sharpener is a hand held portable tuning device, popular with racers and those demanding the finest ski and snowboard edges. This tool maintains prepared edges, to give them a final ceramic polish for the ultimate finish. It comes with a heavy duty battery and quick charger. - The perfect support tool for maintaining Ceramic; Disc Finish edges between shop visits - Exact edge geometry with Ceramic Disc Finish-Technology - Easy handling - Easy side-angle adjustment from 85° to 90° in steps of 0.5° - Mobile use due to a powerful rechargeable battery - Easy changing of the discs (Discs are easily replaceable and an optional polishing disc for improved edge consistency. Technical Specifications: Grinding Speed 16.000 rpm Grinding Disc Ø 35 mm Grinding Angle 85° - 90° Battery 18 V = 2000 mAh Weight 1.6kg (3.5 lb)
The Holmenkol Ergo Easy is a simple and easy to use side edge tool with file, to allow you to do 88 and 89 degree (i.e. 1 or 2 degree) side edge tuning. Supplied with an ICECUT file for setting ski and snowboard edges. The Holmenkol Ergo Easy is a simple and easy to use side edge tool with file, to allow you to do 88 and 89 degree (i.e. 1 or 2 degree) side edge tuning. It comes complete with an Ice Cut file for general side edge tuning. It is small enough to carry in your daypack and easy to grip thanks to the ergonomic file holder construction. Material: Plastic construction with ergonomic grip Packaging: Includes ICE CUT mini file Our Opinion A handy little tool if you dont need a variable angle side edge tool with a quality file as well. Is This For Me? Great for tuning up your edges on the slope or at home without fuss.
A world cup standard traditional file guide for use with a file guide clamp (not included). This model is made from durable and lightweight aluminium with a smooth finish. This is the 88 degree (2 Degree) model. A file clamp (part number 24481) is available separately.
For over 80 years, Holmenkol has been dedicated to the production of the finest ski waxes available. Today, they lead the way, with the introduction of nano technology, combining sport with ground breaking science to produce a comprehensive line of waxes and tools, proven in World Cup use, and suitable for all types of winter sports enthusiasts.The Holmenkol Ergo Pro Side Edge Tool is a high quality ergonomic edge sharpener with glide roller bearings on the base. The Ergo Pro Side Edge professionally sharpens the steel edges of skis and snowboards. Sharpening angles can be adjusted from 90°(0°) to 85°(5°) The tool can also hold diamond files and cross cut files.It comes complete with an Ice Cut file for general side edge tuning and sharpening.Material: Plastic construction with ball bearing wheel guides for easy movement up and down the ski or snowboard base Packaging: Includes ICE CUT standard fileOut OpinionSmall enough to carry on trips, but durable enough for the home workshop, you can replace the supplied file with any other 70 mm-100 mm tuning file, so if you have a diamond file such as our Moonflex diamond files, its a faster and easier way of finishing off your edges with the correct angle.Is This For Me?If you wish to ensure the geometry of your side edges is always correct, or wish to experiment then this is a great tool. For any side edge tuning or servicing, a tool like this is a must!
The SmartEdge 24486 is an electric side edge sharpener for skis and snowboards, to give fast, precise and professional quality sharpening of side edges. Ideal for the DIY workshop and racers alike. Thanks to its innovative design, the side edge can be prepared quickly with less effort than with conventional side edge tools, even if the side edge has been damaged. There is an easy angle setting from 90 to 85 degrees (for 0 degree to 5 degrees side edge angles). The tool comes complete with 4 course bands (item code 24487) and 3 fine bands (Item code 24488), safety mask and a cleaner brush. Supplied with 230 Volt EU cable, however being a standard kettle cable swapping for a UK cable is easy.
For over 80 years, Holmenkol has been dedicated to the production of the finest ski waxes available. Today, they lead the way, with the introduction of nano technology, combining sport with ground breaking science to produce a comprehensive line of waxes and tools, proven in World Cup use, and suitable for all types of winter sports enthusiasts. The Holmenkol Ergo Sidewall Cutter is an ergonomic ski and snowboard sidewall planer, with a gliding base for safe and accurate use. It allows you to remove small amounts of sidewall to enable you to tune your ski and snowboard edges. Complete with a 3 degree radius blade, which can be rotated for prolonged use. Material: Plastic construction with PT FE sliders for easy movement up and down the ski or snowboard base Blade: 3 degree cutting blade Our Opinion A tool to treat with respect, but if a ski or snowboard has had a lot of side edge tuning and sharpening, at some point you will need this to cut back your sidewalls to allow you to tune your edges once again. Is This For Me? For the serious workshop ski or snowboard tuner this is a highly useful tool.
A classic file holder for side edge tuning of skis and snowboards. The guide is of aluminium frame constuction for accuracy with a steel file clamp. Just add the file of your choice. Available in a range of side edge angles from 85 degrees to 89 degrees.
For over 80 years, Holmenkol has been dedicated to the production of the finest ski waxes available. Today, they lead the way, with the introduction of nano technology, combining sport with ground breaking science to produce a comprehensive line of waxes and tools, proven in World Cup use, and suitable for all types of winter sports enthusiasts. The Holmenkol Ergo Semi Side Edge Tool is a compact and tool for setting the correct side edge angle of your skis or snowboard, and for sharpening of the edges. It comes complete with an Ice Cut file for general side edge tuning and sharpening.Material: Plastic construction with PT FE sliders for easy movement up and down the ski or snowboard base Packaging: Includes ICE CUT standard fileOur OpinionSmall enough to carry on trips, but durable enough for the home workshop, you can replace the supplied file with any other 70 mm-100 mm tuning file, so if you have a diamond file such as our Moonflex diamond files, its a faster and easier way of finishing off your edges with the correct angle.Is This For Me?If you wish to ensure the geometry of your side edges is always correct, or wish to experiment then this is a great tool. For any side edge tuning or servicing, a tool like this is a must!