United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
ZyXEL NWA1123-AC Wireless AC Smoke Detector Dual Radio POE Access
Point
Key Features Wireless-N 802.11ac connectivity for increased network capacity High performance for better Wi-Fi experiences (IEEE 802.11n/IEEE 802.11ac) Simultaneous Dual-Band wireless on 2.4Ghz and 5Ghz channels Discreet smoke-alarm form factor and plenum-rated housing 1x Gigabit Ethernet port with PoE for convenient installation Supports dual-stack that allows coexistence of both IPv4 and IPv6 TX Beam forming expands coverage to benefit low power device i.e. smartphones Ideal and optimised solution for business, hospitality and education environments Ceiling-Mount Design with Best Interior Wireless Performance Different from traditional business wireless APs struggling between performance and environment cohesion, the ZyXEL NWA1123-AC AP features embedded antennas and ceiling-mount
capability without sacrificing wireless performance. In typical ceiling-mount installations, the access points with external antennas are mostly hidden in the plenum area; to prevent performance degradation, the antennas usually stick out of the ceiling—messy for indoor deployments. The smoke detector-style exterior of ZyXEL NWA1123-AC is suitable for ceiling installation that prevents equipment theft. Although the ZyXEL NWA1123-AC uses built-in antennas, it outperforms APs with internal antennas and blends into the interior better as well. High-Density with High-Quality User Experience It’s now common for a user to carry two or more devices that use different Wi-Fi bands; this challenges many places that still use legacy Wi-Fi AP with insufficient capability to serve the
high-bandwidth devices. Both NWA1123-NI and NWA1123-AC are compatible with concurrent 2.4 GHz and 5 GHz Wi-Fi bands to support more users at the same time. Featuring the latest IEEE 802.11ac technology, including the expanded channel binding of 80 MHz and the highest 256 QAM (Quadrature Amplitude Modulation), the ZyXEL NWA1123-AC delivers data speeds of up to 3 times faster. This brings the best user experience through higher number of parallel video data streams for minimised latency on the network. Easy RF Planning with same 2.4 GHz and 5 GHz Signal Coverage Most Wi-Fi devices around us operate in the crowded 2.4 GHz band where only three non-overlapping channels can be used for deployments, and complaints for the unsatisfactory network performance are not uncommon. As many recent
mobile or laptop devices support both 2.4 GHz and 5 GHz bands, users tend to choose the 5 GHz band as their first priority; as a result, serving the 5 GHz devices becomes more important than before. However, the coverage of the higher-frequency 5 GHz band is inherently smaller comparing to the 2.4 GHz band, given the same output power. With a fine-tuned 5 GHz radio mechanism that boosts performance at the frequency, the coverage of ZyXEL NWA1123-AC becomes comparable to which at the 2.4 GHz band to reduce the complexity of deployments considerably. Multi-Operation Flexibility and Practical Business Features The ZyXEL NWA1123-AC Access Point supports multiple operating modes including stand-alone access point, wireless client and repeater/root-AP mode. The wireless client mode enables
office peripherals like printers or fax machines to connect to the network in case they are located in places difficult for cabling. The ZyXEL NWA1123-AC also extends Wi-Fi services utilising the repeater or root-AP mode to prevent excessive cable constructions. The ZyXEL NWA1123-AC is the best choice for small businesses for its practical features designed for business deployments: multiple SSID, solid Wi-Fi security of WPA2 Enterprise, Layer-2 isolation and 802.1 x radius authentication. All these practical features along with the high-performance RF design make the ZyXEL NWA1120 Series the best solution for building flexible Wi-Fi networks in small businesses.
capability without sacrificing wireless performance. In typical ceiling-mount installations, the access points with external antennas are mostly hidden in the plenum area; to prevent performance degradation, the antennas usually stick out of the ceiling—messy for indoor deployments. The smoke detector-style exterior of ZyXEL NWA1123-AC is suitable for ceiling installation that prevents equipment theft. Although the ZyXEL NWA1123-AC uses built-in antennas, it outperforms APs with internal antennas and blends into the interior better as well. High-Density with High-Quality User Experience It’s now common for a user to carry two or more devices that use different Wi-Fi bands; this challenges many places that still use legacy Wi-Fi AP with insufficient capability to serve the
high-bandwidth devices. Both NWA1123-NI and NWA1123-AC are compatible with concurrent 2.4 GHz and 5 GHz Wi-Fi bands to support more users at the same time. Featuring the latest IEEE 802.11ac technology, including the expanded channel binding of 80 MHz and the highest 256 QAM (Quadrature Amplitude Modulation), the ZyXEL NWA1123-AC delivers data speeds of up to 3 times faster. This brings the best user experience through higher number of parallel video data streams for minimised latency on the network. Easy RF Planning with same 2.4 GHz and 5 GHz Signal Coverage Most Wi-Fi devices around us operate in the crowded 2.4 GHz band where only three non-overlapping channels can be used for deployments, and complaints for the unsatisfactory network performance are not uncommon. As many recent
mobile or laptop devices support both 2.4 GHz and 5 GHz bands, users tend to choose the 5 GHz band as their first priority; as a result, serving the 5 GHz devices becomes more important than before. However, the coverage of the higher-frequency 5 GHz band is inherently smaller comparing to the 2.4 GHz band, given the same output power. With a fine-tuned 5 GHz radio mechanism that boosts performance at the frequency, the coverage of ZyXEL NWA1123-AC becomes comparable to which at the 2.4 GHz band to reduce the complexity of deployments considerably. Multi-Operation Flexibility and Practical Business Features The ZyXEL NWA1123-AC Access Point supports multiple operating modes including stand-alone access point, wireless client and repeater/root-AP mode. The wireless client mode enables
office peripherals like printers or fax machines to connect to the network in case they are located in places difficult for cabling. The ZyXEL NWA1123-AC also extends Wi-Fi services utilising the repeater or root-AP mode to prevent excessive cable constructions. The ZyXEL NWA1123-AC is the best choice for small businesses for its practical features designed for business deployments: multiple SSID, solid Wi-Fi security of WPA2 Enterprise, Layer-2 isolation and 802.1 x radius authentication. All these practical features along with the high-performance RF design make the ZyXEL NWA1120 Series the best solution for building flexible Wi-Fi networks in small businesses.
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark