More From Contributor

£135.99
With the Zalman ZM800-EBTII you can enjoy a fully modular PSU with 80 plus Gold certification. A fully modular design minimises resistance & voltage drop on the cables & lowers impendance to further enhance energy efficiecy. The PSU also features flat cables, unlike sleeved cables, flat cables make it easier to organise when building your system. Key

Features:
Full Modular PSU Integrated advanced design method of Sense 6-pin to reduce voltage fluctuation to within 3% All cables are flat, easy cable management Up to 92% energy conversion efficiency Active PFC with 99.9% Maximum Power Factor Aluminium high Performance Solid Japanese Capacitor that Handles up to 221&730;F Built-in EMI Filter for Noise Reduction 12V DC-to-DC Convertor with 99.43 Availability Multiple Protection Circuit System Highly Energy-Efficient Standby Power Supply, 0.5W (Er P Lot 6 Certified) Technical Specifications Efficiency: Max 91% @230 VAC, Typical Load Dimensions: 160 (L) x 150 (W) x 86 (H) mm MTBF :100, 000 Hours Weight :3.12kg Operating Temperature: 0~40 &8451; Type: Intel ATX 12V ver. 2.31 Protection :OCP/ OPP/ OVP/ OTP / UVP / SCP PFC: Active PFC (<0.9) Regulatory :UL, FCC, KC, CE, CB, Ro HS, EAC Input Voltage: 100-240 VAC Input Current :10-5A Input Frequency: 50-60 Hz Fan

Size:
135mm Cables (Connector): Mainboard (Sense Connector 1ea) Cable X 1 EPS Cable: X 2 PCI Express Cable: X 5 LDE (Connector 3ea) + FDD (Connector 1ea) Cable X 1 S-ATA Cable X 2 Fan Bearing: Two Ball Bearing 80 Plus Gold



...
Available
£103.98
Zalmans X3 Mid-Towwer focuses on an appealing design with digitally addressable RGB lighting. The cooling properties of the case are not compromised as numerous fans & large CPU coolers are supported. The lighting of the four included case fans can be controlled using buttons on the front panel or through a compatible motherboard. THE FEATURES OF THE ZALMAN X3 MID-TOWER AT A GLANCE: Stylish Mid-Tower in White Slightly tinted tempered glass (20 percent) Front & side panels can be removed without tools Four supplied ARGB fans Suitable for up to six case fans Including ARGB controller for up to six fans & two RGB strips Supports GPUs up to 350mm long THE ZALMAN X3 IN DETAIL: The Zalman X3 is designed for air cooling due to its compact

Dimensions, but can also be equipped with full water cooling. Three 120mm fans with digitally addressable RGB lighting are pre-installed at the factory. Another fan of the same type is located in the rear of the chassis. Two 120 or 140mm fans can be attached to the top. Alternatively, a 140mm fan can be attached to the rear chassis & two 140mm fans instead of the three 120mm fans on the front panel. This allows a total of six 120mm or five 140mm fans to be installed into the X3. The Zalman X3 can accommodate 175mm high CPU coolers. The integrated RGB controller enables the connection of up to six fans including a 3-pin RGB signal cable (5V) & the two RGB strips integrated in the cover. A dedicated button on the front panel means that you can control the lighting effects. Alternatively, the controller can be connected to the 3-pin header of a compatible mainboard in order to control the digitally addressable RGB accessories via software. ZALMAN X3: A HOME FOR POWERFUL HARDWARE COMPONENTS The white motherboard tray of the Zalman X3 can accommodate small mini-ITX, micro-ATX & regular ATX motherboards. Graphics cards can be up to 350mm long. A total of seven horizontal expansion slots are available. There is space for an ATX power supply with a maximum length of 180mm under the power supply cover. The Zalman X3 offers a factory installed drive cage for a 3.5-inch & a 3.5 / 2.5-inch drive & two 2.5-inch drive carriers that can fit on the power supply cover. THE DESIGN OF THE ZALMAN X3 The wide ventilation slot in the front of the chassis is immediately noticeable. It gives the Zalman X3 a classy-looking appearance & enables the ARGB fans behind the mesh with their luminous rings to pull air into the case with ease. The left side panel is a large side window made from tempered glass. This allows for a great view of the installed hardware & has been given a 20 percent tint. The case is completely black, with the motherboard tray & power supply cover in white setting a contrasting accent. The power supply & its connection cables are skillfully hidden by the cover. EXTENSIVE VARIETY OF CONNECTIONS The I / O panel of the Zalman X3 is equipped with two USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 ports. In addition, there are two 3.5 mm jacks, one of which functions as a headphone output & the other as a microphone input. In addition to the power & reset buttons, there is also a button for controlling the RGB lighting.

...
Available
£14.99
The Z-Sync from Zalman is a combined hub & controller that serves as a practical control center for up to eight digitally addressable RGB LED products. Thanks to conventional 3-pin connections (5VDG), it is compatible with almost all RGB LED strips or fans with the corresponding plug. The highlight of the Z-Sync is that it also works on mainboards without RGB-LED slots. To do this, it is simply connected to a free USB (Universal Serial Bus) 2.0 slot. The lighting is controlled using the Z-Sync software or even the Razer Chroma control. The features of the Z-Sync controller / hub from Zalman at a glance: RGB LED controller / hub for digitally addressable LED products Eight 3pin connectors (5VDG) Connection to a free USB (Universal Serial Bus) 2.0 port on the mainboard Control of lighting via ZSync or Razer Chroma software Easy assembly with doublesided adhesive tape The features of the Z-Sync controller / hub from Zalman in detail The Z-Sync controller / hubs from Zalman has eight channels to which digital addressable RGB LEDs can be connected. RGB LED products with a total current of 4 amps can be connected in the 3-pin connectors. In this way, even more than eight RGB LED components can be connected using a distribution cable or daisy chaining. The Z-Sync controller / hubs from Zalmancan be easily installed thanks to the double-sided adhesive strips already attached. With a height of only 12 millimeters, the Z-Sync can also be attached to the back of a mainboard tray. With its side

Dimensions of 79 x 49 millimeters, it easily fits into a free 2.5-inch SSD slot. The power supply is via SATA cable via the power supply. To connect to the mainboard, it must have a free USB (Universal Serial Bus) 2.0 header. As soon as the controller is connected, the RGBs are controlled via the Zalman-Z-Sync or Razer-Chroma software. Technical

Details:
Dimensions: 79 x 49 x 12 mm (W x H x D) Connections: Input: USB (Universal Serial Bus) 2.0 (5pin / micro-USB (Universal Serial Bus), via header on the mainboard) Output: 8x 3pin RGB header (5VDG, max. 4 A) Power supply: 5 V, (via SATA from the power supply) Contents: 1x ZSync controller / hub 1x USB (Universal Serial Bus) connection Cable 1x power cable (SATA) 1x splitter (3pin / 3x 3-pin)



...
Available
£43.98
Front Mesh Cover for High Cooling Performance The front mesh bay cover provides cool air into the system while dust filters prevent dust from entering. Supports up to 7 System Fans Up to 7 system fans are installed to expel hot air effectively from the case. Zalman`s Powerful HDD Cooling Solution Interactive Cooling System: Hot air generated from HDD is expelled through both sides. Cooling Performance is maximized for HDD cooling, & the overall PC exhaust is increased. Top Air Vent Exhaust/ Tuning For for user convenience, Top air vents expel exhaustive air from the top cooling fan. In addition, translucent acryl vents are effective for tuning. Side-Panel Acryl Tuning Dynamic Side Acryl Tuning is provided for users to view the interior of gaming system. Supports 4 USB (Universal Serial Bus) 2.0 I/O module provides 4 USB (Universal Serial Bus) 2.0 ports for user convenience & expandability. Dust Filters for Front & Bottom of System & PSU Dust filters in the front & bottom mesh covers prevent dust from entering the system & keep the internal components dust-free. Additional Card Holder Provided When installing VGA Card & PCI Slot, the bracket can be used permanently. Supports Bottom PSU Installation & Aperture for Cable Management Z11 Plus supports bottom PSU installation & provides an aperture for cable management to make better use of interior space. Black Interior Coating The interior of chassis is coated black to provide a sense of unity & elegant design. Anti-Vibration Rubber Stand Anti-Vibration Rubber prevents noise & also keeps the system safe from water or other liquid. Tool Free HDD Installation with Anti-Vibration Rubber The server-type Tool-Free HDD Mount Trays allow easy HDD installation/removal & maintenance. Spacious Interior for 290mm Card Installation The interior has been designed to be spacious for easy installation & maintenance of various components. Supports Solid-State Drive (SSD) Space is provided on the back of M/B plate for installing 2.5' HDD/SSD. Use the bracket located on the 5.25 bay. Separate Apertures for Convenient CPU Cooler Installation Separate apertures for CPU cooler are provided for convenient CPU cooler installation without having to remove motherboard from case. 3-in-1 Bracket Provided 3IN1 Adapter Tray is provided for installing FDD / 3.5 HDD / 2.5' HDD/SSD. Rear Tube Apertures for Liquid Cooling Systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Enclosure Type
- ATX Mid Tower

Dimensions
- 260 (W) x 498 (H) x 525 (D)mm Weight
- 7.3kg Material
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Compatibility
- Full Size (up to 290mm) Expansion Slot
- 7 Drive Bays
- 5.25' External Bay x 4 3.5' External Bay x 1, Internal Bay x 5 5.25'/3.5'/2.5' 1 (3in-1) Cooling Components Front
- 1 x 120mm Blue LED Fan (120mm / 140mm) Top
- 2 x 120mm Fan (Optional) Rear
- 1 x 120mm Fan (Standard) Side
- 2 x 80mm Fan Bottom
- 120mm/140mm Fan Vent x 1 (Fan optional) I/O Ports
- Mic x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 4 Color
- Black

















...
Available
£49.98
Key

Features:
Front Mesh Cover for High Cooling Performance Supports up to 7 System Fans Zalmans Powerful HDD

...
Available
£52.98
Wide band front mesh ventilation structure Maximizes the air flow keeping the HDD & the system cool. Power supply exclusive cooling Supports bottom PSU installation for effective cooling of PSU & inner space of case Supports USB (Universal Serial Bus) 3.0 port 2 USB (Universal Serial Bus) 3.0 port that speed up to 5 Gbps. Fan Controller Provided Adjustable to user`s needs Side Transparent acrylic Side Acryl Tuning provided for users to view the interior. User centered convenient interface Front USB (Universal Serial Bus) ports, audio socket, power button, reset button & top USB (Universal Serial Bus), fan controller. Dust block filter installed Dust filters on the bottom & front prevent dust from entering 3in-1 adapter tray Provided 3in 1 Adapter Tray is provided for installing FDD / 3.5' HDD / 2.5' HDD/SSD. Black coating chassis luxurious interior with black coating finishing touch. Tube apertures for liquid cooling systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Connect to smartphone &external hard drive Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Anti vibration Tool-Free HDD installation Tool-Free HDD slide tray for convenient installation with anti vibration rubber. Spacious Interior Space Easy for installations & maintenance. 290mm VGA card can be installed. Anti-vibration & Noise Absorption Rubber Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment. Cable Hole Provided Cable hole provided for efficient use of the space. CPU Cooler Mounting Hole Provided Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. PCI Slot Scalability Secured Up to 7 PCI slots scalability secured. Supports solid State Drive (SSD)installation Space provided at the back of the M/B Plate to install the 2.5' HDD/SSD. Enclosure Type
- ATX Mid Tower

Dimensions
- 215 (W) x 470 (H) x 480 (D) mm / 8.4 (W) x 18.5 (H) x 18.8 (D) inch Weight
- 7kg / 15.43 lb Materials
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V PCI/AGP Card Compatibility
- Full Size, 290 mm / 11.4 inch Drive Bays 5.25'- External Bay x 4 3.5'
- Internal Bay x 5 2.5'
- Internal Bay x 1 Common (3in-1)
- Internal Bay 5.25'/3.5'/2.5' x 1 Cooling Components (Fans) Top
- 120mm Fan Vent x 2 (1 Blue LED Fan included), (1 Fan optional) Rear
- 120mm Fan Vent x 1 (1 Fan included) Font
- 120mm Fan Vent x 1 (1 Blue LED Fan included) Bottom
- 120mm Fan Vent x 1 (1 Fan optional) Expansion Card Slots
- 7 Slots I/O Ports
- Headphones x 1, Mic x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2 Color
- Black


















...
Available
£57.82
Wide band front mesh ventilation structure Maximizes the air flow keeping the HDD & the system cool. Power supply exclusive cooling Supports bottom PSU installation for effective cooling of PSU & inner space of case Supports USB (Universal Serial Bus) 3.0 port 2 USB (Universal Serial Bus) 3.0 port that speed up to 5 Gbps. Fan Controller Provided Adjustable to user`s needs Side Transparent acrylic Side Acryl Tuning provided for users to view the interior. User centered convenient interface Front USB (Universal Serial Bus) ports, audio socket, power button, reset button & top USB (Universal Serial Bus), fan controller. Dust block filter installed Dust filters on the bottom & front prevent dust from entering 3in-1 adapter tray Provided 3in 1 Adapter Tray is provided for installing FDD / 3.5 HDD / 2.5 HDD/SSD. Black coating chassis luxurious interior with black coating finishing touch. Tube apertures for liquid cooling systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Connect to smartphone &external hard drive Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Anti vibration Tool-Free HDD installation Tool-Free HDD slide tray for convenient installation with anti vibration rubber. Spacious Interior Space Easy for installations & maintenance. 290mm VGA card can be installed. Anti-vibration & Noise Absorption Rubber Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment. Cable Hole Provided Cable hole provided for efficient use of the space. CPU Cooler Mounting Hole Provided Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. PCI Slot Scalability Secured Up to 7 PCI slots scalability secured. Supports solid State Drive (SSD)installation Space provided at the back of the M/B Plate to install the 2.5 HDD/SSD. Enclosure Type
- ATX Mid Tower

Dimensions
- 215 (W) x 470 (H) x 480 (D) mm / 8.4 (W) x 18.5 (H) x 18.8 (D) inch Weight
- 7kg / 15.43 lb Materials
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V PCI/AGP Card Compatibility
- Full Size, 290 mm / 11.4 inch Drive Bays 5.25- External Bay x 4 3.5
- Internal Bay x 5 2.5
- Internal Bay x 1 Common (3in-1)
- Internal Bay 5.25/3.5/2.5 x 1 Cooling Components (Fans) Top
- 120mm Fan Vent x 2 (1 Blue LED Fan included), (1 Fan optional) Rear
- 120mm Fan Vent x 1 (1 Fan included) Font
- 120mm Fan Vent x 1 (1 Blue LED Fan included) Bottom
- 120mm Fan Vent x 1 (1 Fan optional) Expansion Card Slots
- 7 Slots I/O Ports
- Headphones x 1, Mic x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2 Color
- Black


















...
Available
£26.99
Optimize the cooling performance with 5 fans. Maximizes the air flow keeping the HDD & the system cool. Supports bottom PSU installation for effective cooling of PSU, & also helps to stabilize the case. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Dust filters on the bottom prevents dust entering. luxurious interior with black coating finishing touch. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Supports HDD Hot Swap bay for easy installation even during the operation Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment Without the side guide 360mm high performance VGA card can be installed. Edges are molded nicely to prevent had cutting injuries during installation. Extra 2.5" HDD or SSD installation space provided at the bottom. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case.

Specification Model Z3 Case Type ATX Mid Tower Dimensions 192 (W)x 465 (H)x 430 (D)mm Weight 6kg (13.22lb) Material Plastic, Steel Color Black Motherboard Compatibility Standard ATX / Micro ATX Power Supply Compatibility Standard ATX / ATX12V PCI/AGP Card Compatiblility Full Size 360mm (14.1inch) Drive Bays 5.25" External Bay x 2 3.5" Internal Bay x 4 Cooling Component (Fans) Top 120mm Fan Vent x 2 (1 Fan included) Rear 120mm Fan Vent x 1 (1 Fan included) Front 120mm Fan x 2 (1 Fan included) Fan Controller Simultaneously Control 2 Acrylic Side No VGA Guide No I/O Ports Headphone x 1, MIC x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 X 1 Expansion Card Slots 7 Slots

...
Archived Product
£31.95
Optimize the cooling performance with 5 fans. Maximizes the air flow keeping the HDD & the system cool. Supports bottom PSU installation for effective cooling of PSU, & also helps to stabilize the case. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Dust filters on the bottom prevents dust entering. luxurious interior with black coating finishing touch. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Supports HDD Hot Swap bay for easy installation even during the operation Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment Without the side guide 360mm high performance VGA card can be installed. Edges are molded nicely to prevent had cutting injuries during installation. Extra 2.5 HDD or SSD installation space provided at the bottom. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case.

Specification Model Z3 Plus Case Type ATX Mid Tower Dimensions 192 (W)x 465 (H)x 430 (D)mm Weight 6kg (13.22lb) Material Plastic, Steel Color Black Motherboard Compatibility Standard ATX / Micro ATX Power Supply Compatibility Standard ATX / ATX12V PCI/AGP Card Compatiblility Full Size 360mm (14.1inch) Drive Bays 5.25" External Bay x 2 3.5" Internal Bay x 4 Cooling Component (Fans) Top 120mm Fan Vent x 2 (2 Fan included) Rear 120mm Fan Vent x 1 (1 Fan included) Front 120mm Fan x 2 (1 LED Fan included) Fan Controller Simultaneously Control 2 Acrylic Side Yes VGA Guide Yes I/O Ports Headphone x 1, MIC x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 X 1 Expansion Card Slots 7 Slots

...
Archived Product
£35.80
Optimize the cooling performance with 5 fans. Maximizes the air flow keeping the HDD & the system cool. Supports bottom PSU installation for effective cooling of PSU, & also helps to stabilize the case. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Dust filters on the bottom prevents dust entering. luxurious interior with black coating finishing touch. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Supports HDD Hot Swap bay for easy installation even during the operation Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment Without the side guide 360mm high performance VGA card can be installed. Edges are molded nicely to prevent had cutting injuries during installation. Extra 2.5 HDD or SSD installation space provided at the bottom. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case.

Specification Model Z3 Plus white Case Type ATX Mid Tower Dimensions 192 (W)x 465 (H)x 430 (D)mm Weight 6kg (13.22lb) Material Plastic, Steel Color White Motherboard Compatibility Standard ATX / Micro ATX Power Supply Compatibility Standard ATX / ATX12V PCI/AGP Card Compatiblility Full Size 360mm (14.1inch) Drive Bays 5.25" External Bay x 2 3.5" Internal Bay x 4 Cooling Component (Fans) Top 120mm Fan Vent x 2 (2 Fan included) Rear 120mm Fan Vent x 1 (1 Fan included) Front 120mm Fan x 2 (1 LED Fan included) Fan Controller Simultaneously Control 2 Acrylic Side Yes VGA Guide Yes I/O Ports Headphone x 1, MIC x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 X 1 Expansion Card Slots 7 Slots

...
Archived Product

Zalman Z11 Plus High Performance Mid Tower Case

The front mesh bay cover provides cool air into the system while dust filters prevent dust from entering. Zalman Z11 Supports up to 7 System Fans Up to seven system fans can be installed to expel hot air effectively from the case. One front, one rear, two top, two side and one bottom. Please see the specifications table below for sizes and supplied fans. Zalman Z11 Powerful HDD Cooling Solution Interactive Cooling System: The hot air generated from the HDD is expelled through both sides. Cooling Performance is maximised for HDD cooling, and the overall PC air exhaust is increased. Zalman Z11 Top Air Vent Exhaust For user convenience top air vents exhaust hot air thanks to the supplied cooling fan. In addition the vents have a transparent look increase the distinctiveness of the case.
Zalman Z11 Side Acrylic Panel A dynamic side acrylic panel is provided for users to view the interior of the PC chassis. Zalman Z11 USB Ports The Z11 Plus supports 2x USB3.0 and 2x USB2.0 ports Zalman Z11 Dust Filters for Front, Bottom and PSU Dust filters in the front, bottom and PSU opening have mesh covers that prevent dust from entering the system aiding in keeping the internal components dust-free. Zalman Z11 Supports Bottom PSU Installation and Cut-out for Cable Management Z11 supports bottom PSU installation and provides an cut-out for cable management to make better use of interior space; giving a tidier look inside the PC. Zalman Z11 Black Interior Coating The interior of chassis is coated black to provide a sense of unity and elegant design. Zalman Z11 Tool Free HDD
Installation with Anti-Vibration Rubber The server-type Tool-Free HDD mount trays allow easy HDD installation/removal and maintenance. Zalman Z11 Spacious Interior for 290mm Card Installation The interior has been designed to be spacious for easy installation and maintenance of various components, including long graphics cards. Zalman Z11 Supports Solid-State Drive (SSD) Space is provided on the back of motherboard plate for installing a 2.5" HDD/SSD. Bracket also supplied for a 5.25" bay. Zalman Z11 Separate Cut-out for CPU Cooler Installation A separate cut-out for CPU cooler is provided for convenient CPU cooler installation without having to remove the motherboard from case. Zalman Z11 Rear Tube Apertures for Liquid Cooling Systems Tube cut-outs are provided at the rear of the case
for convenient water cooling set-up and maintenance.
RIP - This product is no longer available on our network. It was last seen on 04.03.2024

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
  • Availability: Out Of Stock
  • Supplier: Ebuyer
  • SKU: 392396
Availability: In Stock
£57.92

Product Description

The front mesh bay cover provides cool air into the system while dust filters prevent dust from entering. Zalman Z11 Supports up to 7 System Fans Up to seven system fans can be installed to expel hot air effectively from the case. One front, one rear, two top, two side & one bottom. Please see the specifications table below for sizes & supplied fans. Zalman Z11 Powerful HDD Cooling Solution Interactive Cooling System: The hot air generated from the HDD is expelled through both sides. Cooling Performance is maximised for HDD cooling, & the overall PC air exhaust is increased. Zalman Z11 Top Air Vent Exhaust For user convenience top air vents exhaust hot air thanks to the supplied cooling fan. In addition the vents have a transparent look increase the distinctiveness of the case. Zalman Z11 Side Acrylic Panel A dynamic side acrylic panel is provided for users to view the interior of the PC chassis. Zalman Z11 USB (Universal Serial Bus) Ports The Z11 Plus supports 2x USB3.0 & 2x USB2.0 ports Zalman Z11 Dust Filters for Front, Bottom & PSU Dust filters in the front, bottom & PSU opening have mesh covers that prevent dust from entering the system aiding in keeping the internal components dust-free. Zalman Z11 Supports Bottom PSU Installation & Cut-out for Cable Management Z11 supports bottom PSU installation & provides an cut-out for cable management to make better use of interior space; giving a tidier look inside the PC. Zalman Z11 Black Interior Coating The interior of chassis is coated black to provide a sense of unity & elegant design. Zalman Z11 Tool Free HDD Installation with Anti-Vibration Rubber The server-type Tool-Free HDD mount trays allow easy HDD installation/removal & maintenance. Zalman Z11 Spacious Interior for 290mm Card Installation The interior has been designed to be spacious for easy installation & maintenance of various components, including long graphics cards. Zalman Z11 Supports Solid-State Drive (SSD) Space is provided on the back of motherboard plate for installing a 2.5" HDD/SSD. Bracket also supplied for a 5.25" bay. Zalman Z11 Separate Cut-out for CPU Cooler Installation A separate cut-out for CPU cooler is provided for convenient CPU cooler installation without having to remove the motherboard from case. Zalman Z11 Rear Tube Apertures for Liquid Cooling Systems Tube cut-outs are provided at the rear of the case for convenient water cooling set-up & maintenance.

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

USB - Universal Serial Bus
Acrylic - A type of plastic
HDD - Hadr disk drive - an electronic storage media
Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.
CPU - Central processing unit. The processing centre of computer programs. The faster the processor usually the faster the computer
HDD - Hard Disk Drive, an electronic storage device
Liquid - A state of matter - fluid form
rubber - Synthetic rubber is any artificial elastomer, usually a polymer, and is used as a substitute for natural rubber.
rubber - Natural rubber is an elastomer derived from the latex containing sap of some plants.
water - A chemical substance. Chemical formula H2O.
hot - An indication of the temperature being high and a sensation of heat to the tough
PC - Personal Computer - an electronic device for acheiving multiple electronic tasks including word processing, emails and internet access
Cable - A series of wires bonded to form a single thread
Graphics - A general term for visual aspects of an item/display
Interactive - Interaction can take place between a person and a device
Dust - A general term used for micro particles in the atmosphere
290mm - the equivilent of 29cm
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Components - Multiple items used to complete the product.
USB - Universal Serial Bus. A method of connecting a device to a computer
Convenience - A way of being able to carry out a task with little effort
Design - A drawing or styles that shows the look and functionality of something before its made.
Interior - The inside of something, usually what is not visible.
Solid - Something that is firm and not liquid, a hard shape that cannot be changed easily.
Mesh - A material mad up of crossed over fibres such as metal or thread.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,
Convenient - Something that suits and fits well to other activities.

Supplier Information

Ebuyer
Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.
Page Updated: 2024-03-04 12:41:25

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu