This Xenta USB2.0 to Ethernet adapter is a great way to add instant network capability to a PC or laptop. Features Compliant with the Standard

Specification of USB (Universal Serial Bus) 1.1 & 2.0 USB (Universal Serial Bus) 2.0 to 10/100 Mbps Fast Ethernet IEEE 802.3u 100BASE-T, TX Compatible Full/ High Speed USB (Universal Serial Bus) 2.0 Device with bus power capability Supports 4 endpoints on USB; full-duplex or half-duplex operation on Fast Ethernet Supports automatic loading of Ethernet ID, USB (Universal Serial Bus) Descriptor & Adapter Configuration Supports suspended mode & remote wakeup Supports TCP/IP, Net BEUI, IPX/SPX protocols Supports USB (Universal Serial Bus) suspend/resume detection logic, wake-up frame, Link starts change Supports Windows XP/ Vista or higher Specifications USB (Universal Serial Bus) 2.0 Adapter

Colour: Black Pack

Size: 1 Manufacturer: Xenta IEEE 802.3u 100BASE-T, TX Compatible





...

The next advance in data transfer speed, USB (Universal Serial Bus) 3.0. With transfer speeds 10x faster than USB2.0, you can transfer files much easier (USB3.0 enabled devices required, i.e flash drive, USB (Universal Serial Bus) Pen etc)

Features: 10 times faster than High Speed USB (Universal Serial Bus) 2.0 PCI-Express x 1 Connection Complies with Universal Serial Bus 3.0

Specification Revision 1.0 Backward compatible to USB (Universal Serial Bus) 2.0 Supports the following data Transfer Rate: USB (Universal Serial Bus) 2.0 Mode Up to 480mps USB (Universal Serial Bus) 3.0 Mode up to 5gps Max 5w/900m A Power output to each USB (Universal Serial Bus) 3.0 Port Supports Windows XP/32/64 -bit Vista 32/64-bit & Windows 7 32/64 -bit



...

Xenta USB (Universal Serial Bus) 3.0 4 Port Hub The Xenta 4 port USB (Universal Serial Bus) 3.0 Hub is a multi-functional hub that means that you can connect up to four USB (Universal Serial Bus) 3.0 ports to your PC. Key Features In-built surge protector Supports Plug & Play & hot swapping Super-Speed USB (Universal Serial Bus) 3.0 ports with Super-Speed transfer rates of 5 Gbps 2 year warranty More Detail… The angled dock is suitable for charging, transferring & syncing, & is backward compatible with USB (Universal Serial Bus) 2.0 & USB (Universal Serial Bus) 1.1 so it doesn’t matter if your printer or camera, for example, is a little older. With Super-Seed transfer rates of up to 5 Gbps, you can sync your media files & documents even faster. The hub has a sleek & stylish design, supporting Plug & Play as well as hot swapping so your device will be ready to use as soon as it is connected. The hub is also compatible with any of the following systems: Microsoft Windows XP/ Vista/7/8, Linux & Mac OS 10.2 or above. In the box 1 x USB (Universal Serial Bus) 3.0 4 ports Hub 1 x DC5V Power Adapter 1 x USB (Universal Serial Bus) 3.0 Extension Cable (81cm Cable Length) ...

Xenta 3.0 7+2 Port USB (Universal Serial Bus) Hub Connect up to seven external devices to your computer or laptop at the same time, whilst charging two other devices with the Xenta 7 port USB (Universal Serial Bus) 3.0 Hub. The dock is surprisingly sleek in design & each of the seven ports benefit from Super-Speed transfer rates of up to 5 Gbps so you won’t be waiting for files to sync. The two fast charging ports are compatible with the majority of USB (Universal Serial Bus) devices up to 2.4A, including Apple & Samsung smartphones, & the speed is not compromised even when both of the charging ports are in use. Backward compatible with USB (Universal Serial Bus) 2.0 & 1.1, the dock also supports Microsoft Windows XP/ Vista/7/8, Mac 10.2 + & Linux as well as Plug & Play for ease of use straight away. The package contains: 1 x 7 USB (Universal Serial Bus) 3.0 Port Hub 1 x USB (Universal Serial Bus) 3.0 Data Cable 1 x Power Adapter DC 12V/2A Main

Features: 7 USB (Universal Serial Bus) 3.0 ports with Super-Speed 5 Gbps transfer rates 2 USB (Universal Serial Bus) vertical charging ports Supports hot swapping & Plug & Play Built-in surge protector 2 year warranty

...

High Speed USB (Universal Serial Bus) 3.0 10 times faster than USB2.0 compatible with USB2.0 & 1.1 Devices 2 Metre Length Impedance matches twisted pair construction helps to minimize cross talk, super high-speed, error-free transmission ...

A to A connector type USB (Universal Serial Bus) leads USB (Universal Serial Bus) 3.0

Specification, will also work

...

Xenta USB (Universal Serial Bus) 3.0 A to B super speed M/M
- 1m Connect to your external solutions & transfer data at 10x the
...

Features & Specs: Transfer rate of Super-Speed USB (Universal Serial Bus) 3.0 interface can be up to 5 Gb/sec (Max) Supports Hot-Swapping & Plug & Play function Compliance with Serial ATA

Specification Revision 2.6 Backward compatible with previous versions of USB (Universal Serial Bus) ports (1.0, 1.1&2.0) & SATA hard disks (1.5 Gb/s) Supports Mass Storage Class Drive No driver installation required for Windows XP/ Vista/7 External Interface: USB (Universal Serial Bus) 3.0 & e SATA Dimensions: 52x 35x 18mm

Colour: Blue Note: For maximum data throughput, use a SATA 3 Gb/s hard disk with the adapter & connect to a fully functional USB (Universal Serial Bus) 3.0 port Chipset ASM1051 Connector 1 x e SATA connector System Requirements Windows 7 (32-/64-bit) ) / Vista (32-/64-bit) / XP (32-/64-bit)/ Server 2003 & 2008 (32-/64-bit) with the latest Service Packs Notebook or desktop PC with an available USB (Universal Serial Bus) 2.0/ 3.0 port (USB 3.0 recommended) Note: USB (Universal Serial Bus) 3.0 host driver is currently available for Windows 7, Vista & XP only Package Contents 1 x USB3.0 to e SATA adapter 1 x User manual



...

Xenta USB (Universal Serial Bus) 3.0 to SATA 15 + 7 pin connector cable Specifications Backward compatible with USB (Universal Serial Bus) 2.0 & 1.1 Suitable for 2.5-inch SATA Hard Drive Supported transmission rate: Overspeed (5 Gbps) / high speed (480 Mbps) / full speed (12 Mbps) Support for hard drives larger than 2TB Support hot-swapping, plug & play Powered via computer USB (Universal Serial Bus) port, no external power required Compatible with Win 98/ME/2000/XP/VISTA / win 7/MAC OS 9.X/10.X / Linux, etc

Colour: Black Length: 20cm

...

The best things come in small packages & this 6 in 1 hub from Xenta fits the bill. With its compact design the hub will sit conveniently on your desk & provide all the connection options you need. &, with it being so lightweight, you can easily tuck it into your laptop bag & take it with you when travelling to the office or college. C-type hub The C-type device works with the latest laptops & gives you access to all the ports you need. There’s two superfast USB (Universal Serial Bus) 3.0 ports along with a USB (Universal Serial Bus) C. An all-important HDMI slot is provided along with SD & Micro SD card readers. Plug & play The Xenta 6 in 1 hub & card reader is a plug & play device. There’s nothing to install & you can use it instantly with any compatible laptop or PC. value for your money As with all Xenta products you get so much more bang for your buck. Affordable & reliable this hub is essential kit. Made from durable aluminium this hub will never let you down. Buy yours now. Specifications Type C to HDMI. 2 x USB (Universal Serial Bus) 3.0. 1 x HDMI. 1 x Micro SD Card Reader. 1 x SD Card Reader. 1 x USB (Universal Serial Bus) C PD charging. Support Windows XP/7/8 Mac OS 9/10.

Material: Aluminium.

Colour: Silver.



...