HP E-M110 Access Point is an entry-level, single IEEE 802.11a/b/g radio device that can be configured to operate as an access point, a wireless distribution system (WDS) bridge, or a full-spectrum IEEE 802.11 wireless LAN (WLAN) monitor. The E-M110 Access Point supports up to two virtual service communities, each with independent VLAN & wireless security profiles. It is plenum-rated & powered by an IEEE 802.3af (Po E) source. The M110 access point is Wi-Fi certified for WPA2, WPA, & WEP security & has hardware-assisted AES & RC4 encryption. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP E-series MSM Access Points are managed by any of the HP E-series MSM controllers & the HP RF manager for the RF security sensors. The HP E-series Access Points can also work in autonomous mode. The HP E-series MSM Access Points are IEEE802.3af compliant. ...

HP MSM313 Access Point integrates a full-featured Multi Service Mobility Access Point & Multi Service Mobility controller in a single turnkey unit. Its used to create easy-to-use public/guest Internet access (hotspot) services. The zero-configuration service interface adapts to client device configuration settings. Bandwidth management creates multiple service tiers & provides users with fair access to bandwidth. The Access Point provides secure user authentication, authorization, & accounting (AAA), enabling a wide range of free or fee-based service models. It supports HTML & IEEE 802.1x login, & provides interfaces for centralized AAA, captive portal, & billing functions, allowing large multilocation networks. ...

HP MSM317 Access Device integrates wired & wireless connectivity into a small unit that can be quickly & discretely installed in a standard wall outlet box in residential or hospitality properties. It provides four Ethernet ports, a 2.4 GHz wireless access point, & a pass-through RJ-45 connection for service & user connectivity. One of the Ethernet ports can be configured as an IEEE 802.3af-compliant PSE port to enable devices such as IP telephones to be powered directly from the unit. The MSM317 Access Device requires a single Power over Ethernet (Po E) cable drop, reducing cabling, switch ports, & power sourcing equipment. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

HP Pro Curve MSM410 WW Access Point The E-series MSM Access Points are advanced wireless devices that provide consistent, easy-to-manage connectivity that expands your existing network. The Access Points maintain your network without interruption & reduce bottlenecks & network complexity by determining where data needs to go throughout the network. The E-series MSM Access Points provide complete wireless coverage for greater reliability & connectivity. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

This highest-performing family of access points improves productivity & is the first in the industry to offer three spatial stream MIMO technology, bringing IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps & enhancing coverage areas with beamforming technology. These APs deliver the highest performance in 802.11n AP technology in the market today with the best price & performance in the industry. Each dual radio 802.11n access point operates in the 2.4 G Hz & 5 G Hz bands, providing backward compatibility for IEEE 802.11a/b/g legacy technologies. These APs can operate with or without a wireless controller & support all the same enterprise features as the prior HP E-series MSM wireless products, in addition to more features, such as beamforming, bandsteering. ...

This highest-performing family of access points improves productivity & is the first in the industry to offer three spatial stream MIMO technology, bringing IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps & enhancing coverage areas with beamforming technology. These APs deliver the highest performance in 802.11n AP technology in the market today with the best price & performance in the industry. Each dual radio 802.11n access point operates in the 2.4 G Hz & 5 G Hz bands, providing backward compatibility for IEEE 802.11a/b/g legacy technologies. These APs can operate with or without a wireless controller & support all the same enterprise features as the prior HP E-series MSM wireless products, in addition to more features, such as beamforming, bandsteering, & concurrent 5 G Hz operation. ...

This highest-performing family of access points improves productivity & is the first in the industry to offer three spatial stream MIMO technology, bringing IEEE 802.11n near Gigabit Ethernet performance to 900 Mbps & enhancing coverage areas with beamforming technology. These APs deliver the highest performance in 802.11n AP technology in the market today with the best price & performance in the industry. Each dual radio 802.11n access point operates in the 2.4 G Hz & 5 G Hz bands, providing backward compatibility for IEEE 802.11a/b/g legacy technologies. These APs can operate with or without a wireless controller & support all the same enterprise features as the prior HP E-series MSM wireless products, in addition to more features, such as beamforming, bandsteering, & concurrent 5 G Hz operation. ...

Working with HP Multi Service Mobility Access Points, HP Multi Service Mobility Controllers deliver a high-performance networking solution. The enhanced architecture scales from IEEE 802.11b to 802.11n without expensive controller upgrades. Robust identity & roles-based user account profiles, as well as Virtual Service Communities (VSCs) with independently configurable Quality of Service (Qo S), authentication, encryption, & VLAN support, deliver intelligence to the edge of the network. Scalable from branch offices to large organizations, the controllers deliver fast-roaming & ultraspeed h&-offs. Wireless security is rock solid with support for the internal & external authentication, authorization, & accounting (AAA) servers, built-in stateful firewall, per-user VLAN mapping, & mutual controller/access point (AP) authentication. Please note: networking & wireless components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Working with HP Multi Service Mobility Access Points, HP Multi Service Mobility Controllers deliver a high-performance networking solution. The enhanced architecture scales from IEEE 802.11b to 802.11n without expensive controller upgrades. Robust identity & roles-based user account profiles, as well as Virtual Service Communities (VSCs) with independently configurable Quality of Service (Qo S), authentication, encryption, & VLAN support, deliver intelligence to the edge of the network. Scalable from branch offices to large organizations, the controllers deliver fast-roaming & ultraspeed h&-offs. Wireless security is rock solid with support for the internal & external authentication, authorization, & accounting (AAA) servers, built-in stateful firewall, per-user VLAN mapping, & mutual controller/access point (AP) authentication. ...