Edimax ES-5800G 8-Port Gigabit Ethernet Switch ES-5800G is an ideal energy saving switch integrated with eight 10/100/1000 Mbps Gigabit ports. It is designed to meet the demands of transferring large files across the network with fast speeds. The switch is capable of detecting the length of the Ethernet cable connected & automatically supply with the right amount of energy. It also reduces its power consumption if ports are idle. Key Features Complies with the IEEE 802.3, IEEE 802.3u & IEEE 802.3ab standards. Smart Green Ethernet technology to reduce power consumption 30%~50%. Supports Auto-MDI/MDI-X, full/half duplex modes & auto-negotiation. Supports flow control, Non-blocking & Jumbo Frame. SUPPORT FULL WIRE-SPEED & FLOW CONTROL The ES-5800G complies with IEEE802.3, IEEE802.3u & IEEE802.3ab standards. The switch is using non-blocking switching architecture, featuring your network with full-wire speed connections. It accommodates with flow control for full duplex mode & back pressure for half-duplex mode which ensures reliable data transfer & helps to prevent data lost. ES-5800G creates a high-speed Gigabit network & users benefit from its ultimate performance & reliability. SUPPORT JUMBO FRAME The ES-5800G supports jumbo frame which means that you can extend the Ethernet frame size to maximum 9600 bytes to increase data rate. This cost-efficient switch is the best choice for Small office/ Home office SUPPORT AUTO-MDI/MDI-X The ES-5800G easy plug & play installation comes with its auto-MDI/MDI-X support. You can use either straight-through or cross-over Ethernet cable & connect 10, 100 & 1000 Mbps devices into ES-5800G. The switch will detect the right cable & speed of devices automatically. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The ES-5800G V3 is a 10/100/1000 Mbps Gigabit Desktop unmanaged switch designed to enhance network performance in a compact form factor, & with outstanding performance & high efficiency. The switch uses store & forward packet-switching technology which offers reliable data transfer. This switch is ideal for network connectivity for the SOHO environment. The ES-5800G V3 with plastic housing offers a cost-effective Gigabit Ethernet solution for users to easily extend home networks & to fulfill their online gaming, multimedia transferring & streaming needs. The plug-&-play design allows users to easily connect network devices such as PCs, network storages & print servers to the home network without manual configuration involved. IEEE Energy Efficient Ethernet (EEE) Compliance The Switch ES-5800G V3 offers environmental efficiency with Fast Ethernet speeds critical for next-generation network applications. To comply with the IEEE802.3az standard, the Switch ES-5800G V3 provides power saving functions to reduce energy consumption to help business save cost. Inactive Link Detection: When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to the link status & the number of active network devices. Cable Length Detection: Devices equipped with this feature automatically detect the length of connected Ethernet cables & adjust power usage accordingly. The shorter the cable length, the less power it consumes. Supports High-Speed Networking & Jumbo Frames The ES-5800G V3 is an excellent solution to expand your Gigabit network. With Gigabit speed, the ES-5800G V3 gives high flexibility & high bandwidth connectivity to servers, workstations & other attached devices. It enables you to save time when transferring large files. In addition, it also supports Jumbo Frames 9K to improve network utilization in large files transfer. Supports Auto-Negotiation Every port of the ES-5800G V3 can automatically distinguish the connected network devices are running at 10 Mbps, 100 Mbps & 1000 Mbps for Half/ Full-Duplex mode. The ES-5800G V3 can adjust the speed & mode accordingly. Easy to Use The ES-5800G V3 is plug-&-play & supports all kind of network protocols to make installation & network management easy & fast. LED indicators provide a quick & easy way to read port & switch information. ...

The GS-1008P is an 8-port 10/100/1000BASE switch with 8 Po E ports, designed for use in small or medium sized network environments. This product is compact in size, making it ideal for users with limited space. It also gives users the option of installing it in a 19" cabinet with rack-mount kits or underneath a desk. Complies with IEEE 802.3at Power over Ethernet (Po E) The GS-1008P features 8 IEEE 802.3at Power over Ethernet (Po E) ports, which supply up to 30 watts of power per port. It can convert standard 100-240V AC power into low-voltage DC, which runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The GS-1008P also features Po Edetection, to verify whether the connected device is IEEE 802.3at compliant; if it is not a Po E device, only data will be sent through the LAN cable. The GS-1008P can connect with a variety of Po E products, including access points, IP cameras & IP phones. It is the best solution for when power outlets are difficult to install or the power outlets are too far from the device. No Special Networking Cable Required The standard Cat-5 Ethernet cable is used to link the GS-1008P & the powered devices. This Ethernet cable can transmit both data & power. No separate power cable is needed for the powered devices, thus reducing installation time & costs. Fan-Less Design Since the fan-less design ensures quiet operation in small office spaces, the GS-1008P is an ideal solution for SOHO environments. ...

Complies with IEEE 802.3, 802.3u, 802.3x, 802.3af, & 802.3at standards Supplies 48V DC with 30W output per port (80W total power budget) Automatically detects power devices (PD) & power consumption levels Supports auto fault detection (over/under current & voltage) Supports IEEE 802.3az Energy Efficient Ethernet ...

Complies with IEEE 802.3, 802.3af, 802.3u, 802.3x, 802.1q, 802.3at standards Supplies 48V/DC with 30W output per port Power consumption budget UI to monitor power usage Port-based remote power on/off to restart connected Po E devices individually Supports IGMP snooping to optimize network performance Supports 8 port-based VLAN & 16 tag-based VLAN groups Supports 2 trunking groups (4 ports per group & up to 2 groups for each device) ...

World’s Fastest USB (Universal Serial Bus) Wi-Fi Adapter The Edimax EW-7822UAC is the next generation of Wi-Fi adapter, compatible with the draft 802.11ac standard & delivering speeds of up to 867 Mbps at 5 G Hz
- almost three times as fast as 802.11n. The EW-7822AC is the first adapter of its kind to offer 802.11ac speeds together with USB (Universal Serial Bus) 3.0 connectivity. Upgrade PC’s & notebooks to super high speed 802.11ac Wi-Fi & enjoy streaming video & data at speeds of up to 867 Mbps. Dual-band Connectivity Enjoy better performance & greater flexibility for your Wi-Fi devices, using dual-band connectivity. The EW-7822UAC provides concurrent connectivity for the 2.4 G Hz band & 5 G Hz band at speeds of 300 Mbps & 867 Mbps respectively. Download & Stream Anywhere Use the EW-7822UAC to download & stream media from You Tube, Netflix or other services without waiting for buffering, or stream media across your network from a NAS (network-attached storage) at lightning speeds. Streaming HD movies or downloading is faster & more reliable than ever with 802.11ac Wi-Fi. Adjustable Foldaway Antenna The EW-7822UAC’s sleek design features an adjustable foldaway antenna, allowing users to adjust the antenna’s angle for optimum Wi-Fi performance & fold back the antenna to minimize size when it’s not in use
...

- Device Type: Radio access point
-

Width: 17.6 cm
-

Depth: 17.6 cm
-










...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

- Device Type: Wireless router
- 4-port switch (integrated)
- Enclosure Type: Desktop
- Connectivity Technology: Wireless,


...

Premium Solution with Super-High Speed AC1750 for Elite Performance The CAP1750 is a powerful wireless solution designed to meet the needs of modern mainstream businesses with the latest IEEE 802.11ac technology for wireless speeds up to 1750 Mbps. Industrial-grade performance & build quality combined with user-friendly operation, super-fast wireless speed, an extensive feature set & a practical, ceiling-mount design make an ideal dual-band solution for enterprise environments. For businesses that demand security, flexibility & speed – the Edimax Pro series has a wide range of potential applications from office environments to schools, campuses, hotels & hospitals. High-density capacity for up to 100 simultaneous users is ideal for BYOD workplaces or other environments with a high volume of users & wireless devices. Multiple SSIDs can be configured for different departments or user groups & a built-in RADIUS server provides additional verification with a scalable AP array architecture for central management of multiple access points. Fast roaming for seamless transitions between access points, Power over Ethernet support (Po E) & an intuitive web-based management interface provides flexibility for deployment & extensive management options for company MIS departments & network administrators. When performance & security are critical for your business, you need products that are engineered for your industry. The Edimax Pro series is designed to help your business & provide the connectivity that you rely on every day, with safety & effectiveness guaranteed. KEY FEATURES •802.11AC Dual-Band High Speed: IEEE 802.11ac concurrent dual-band with 1750 Mbps wireless speed. • Easy Installation: Ceiling-mount & T-rail mount design with easy installation kit. • Compact & Durable Housing: Ultra slim design with UL94-5VB flame-retardant plastic housing. • Designed for High Density Usage: Supports up to a hundred users simultaneously, ideal for crowded environments & BYOD (Bring Your Own Device) workplaces. • Multiple SSIDs for Security Management: Supports up to 32 SSIDs (16 x 2.4 G Hz & 16 x 5 G Hz) ideal for multiple departments, user groups, customers or guests. • Fast Roaming: Roams smoothly between APs without lag or interruption, ensuring top performance for video & voice streaming applications. • Wide Coverage & High Sensitivity: Adjustable RF output power & high receiver sensitivity for wide coverage across large spaces. • Seamless Mobility: 1.5x greater coverage than typical APs for blanket coverage to ensure seamless connectivity for Wi-Fi devices across enterprise environments. • Power over Ethernet: Supports IEEE 802.3at Po E as well as included power adapter. • Built-In RADIUS Server: With management for up to 256 user accounts. • Business Environments: Mainstream choice for SMBs. Suitable for a wide range of commercial applications such as offices, hotels, meeting rooms, schools, campuses, resorts, retail & others. • Central Management: Edimax Pro Network Management Suite (NMS), easy & Intuitive web-based central management suite, supports AP array architecture. ...