The Cisco Aironet 1040 Series Access Point is an enterprise-class, entry-level 802.11n access point designed to address the wireless connectivity needs of small & medium-sized enterprises. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1040 Series Access Point is an enterprise-class, entry-level 802.11n access point designed to address the wireless connectivity needs of small & medium-sized enterprises. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1040 Series Access Point is an enterprise-class, entry-level 802.11n access point designed to address the wireless connectivity needs of small & medium-sized enterprises. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point is a fixed-configuration, dual-band access point. Built in to the access point are two radios each with diversity antennas that provide omni-directional coverage. The Cisco Aironet 1130AG supports local power as well as Power over Ethernet (Po E), either by an IEEE 802.3af-compliant Power Sourcing Equipment (PSE) device, such as a switch, or by a device capable of providing 12.95W to a Powered Device (PD) & compliant with Cisco Inline Power. The Cisco Aironet 1130AG Series

Includes:: a console port for management.

...

Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a & 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. The Cisco Aironet 1130AG Series uses radio & network management features for simplified deployment, along with built-in omnidirectional antennas that provide robust & predictable WLAN coverage for offices & similar RF environments. The competitively priced Cisco Aironet 1130AG Series is ready to install & easy to manage, reducing the cost of deployment & ongoing maintenance. The Cisco Aironet 1130AG Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) & work in conjunction with Cisco wireless LAN controllers & the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1130AG Series can automatically detect the best-available Cisco wireless LAN controller & download appropriate policies & configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software & may optionally operate with the Cisco Works Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the Cisco Works WLSE, deliver a core set of features & may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as requirements evolve. The Cisco Aironet 1130AG Series delivers optimal value for offices & similar environments. Built-in antennas provide omnidirectional coverage specifically designed for todays open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130AG Series access points to ceilings & walls. With an unobtrusive design, Cisco Aironet 1130AG Series access points are aesthetically pleasing & blend into their environments. For maximum concealment, the access point may be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco Aironet 1130AG Series allows the access point to be placed above ceilings in plenum areas regulated by municipal fire codes. Offered at a competitive price, & optimized for easy installation & operation, the Cisco Aironet 1130AG Series helps organizations attain a lower total cost of ownership. ...

The Cisco Aironet 1130G Series Access Point is a single-band 802.11g access point that features business-class management, security, & scalability. This low-profile access point offers high-performance wireless connectivity in offices & similar environments. The Cisco Aironet 1130G Series delivers optimal value for offices & similar environments. Built-in antennas provide omnidirectional coverage specifically designed for todays open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130G Series Access Points to ceilings & walls. With an unobtrusive design, Cisco Aironet 1130G Series Access Points are aesthetically pleasing & blend into their environments. For maximum concealment, the access point can be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco Aironet 1130G Series allows for placement of the access point above ceilings in plenum areas regulated by municipal fire codes. Offered at a competitive price & optimized for easy installation & operation, the Cisco Aironet 1130G Series helps organizations attain a lower total cost of ownership. ...

The Cisco Aironet 1140 series Access Point is a business-ready, indoor access point designed for simple deployment & energy efficiency. The 1140 series is a dual-b&, 802.11n access point with integrated antennas. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1140 Series Access Point is a business-ready, 802.11n access point designed for simple deployment & energy efficiency. The high-performance platform, which offers at least six times the throughput of existing 802.11a/g networks, prepares the business for the next wave of mobile devices & applications. Building on the Cisco Aironet heritage of RF excellence, the 1140 Series combines the industrys most widely deployed 802.11n technology with a sleek industrial design that blends seamlessly into any enterprise environment. Designed for sustainability, the 1140 Series delivers high performance from standard 802.3af Power over Ethernet while decreasing waste with multiunit eco-packs & Energy Star certified power supplies. As part of the Cisco Unified Wireless Network, the 1140 Series provides the industrys lowest total cost of ownership & investment protection by integrating seamlessly with the existing network. The Cisco Unified Wireless Network with M-Drive technology removes the mystery associated with design, implementation, & ongoing optimization of enterprise wireless networks. With Cisco M-Drive technology, IT has the tools needed to build & operate a high performance wireless network without the need for extensive RF engineering skills. Cisco M-Drive technology is a systemwide approach that manages the corporate RF spectrum, improves wireless coverage, & increases system capacity & performance. The Cisco Aironet 1140 Series offers 802.11n performance with standard 802.3af Power over Ethernet (Po E). At only 12.95 watts of power, the 1140 Series is the only platform to combine the power of dual-radio 802.11n with the efficiency of standard Po E. in addition, the 1140 Series is designed to operate more efficiently during off-peak hours when fewer clients are connected to the access point. Please note this product does not ship with apower supply as standard
- this optional extra is QF 242478.
...

Cisco Aironet 1240AG Series IEEE 802.11a/b/g access points deliver the versatility, high capacity, security, & enterprise-class features demanded by WLAN customers. It is designed specifically for challenging RF environments like factories, warehouses, & large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, & a broad operating temperature range. The Cisco Aironet 1240AG Series provides local as well as inline power, including support for IEEE 802.3af Power over Ethernet (Po E). The Cisco Aironet 1240AG Series is a component of the Cisco Unified Wireless Network, a comprehensive solution that delivers an integrated, end-to-end wired & wireless network. Using the radio & network management features of the Cisco Unified Wireless Network for simplified deployment, the Cisco Aironet 1240AG Series extends the security, scalability, reliability, ease of deployment, & manageability available in wired networks to the wireless LAN. The Cisco Aironet 1240AG Series offers link role flexibility providing both access point & bridge function on the same platform. Link role flexibility allows the radios to be individually configured as an access point, repeater, root bridge, non-root bridge, or workgroup bridge, enabling a broad array of applications. The Cisco Aironet 1240AG Series is available as an autonomous access point or available supporting the Lightweight Access Point Protocol (LWAPP). When configured with LWAPP, the Cisco Aironet 1240AG Series can automatically detect the best-available Cisco wireless LAN controller & download appropriate policies & configuration information with no hands-on intervention. With simultaneous support of 802.11a & 802.11g standards, the Cisco Aironet 1240AG Series delivers up to a 108-Mbps data rate in the 5-GHz & 2.4-GHz bands. The series currently supports 12 non-overlapping channels (FCC; other regulatory domains support different numbers of 802.11a channels) with potentially up to 23 channels via a future firmware release depending on FCC rules. Other regulatory domains may support a different number of channels, simplifying deployments for high-capacity wireless networks. For investment protection, the Cisco Aironet 1240AG Series fully supports the capabilities of todays dual-band WLAN clients while providing backward compatibility with legacy 802.11b clients. The Cisco Aironet 1240AG Series adheres to the most stringent security standards in the industry. The 1240AG Series is on the FIPS 140-2 Pre-Validation List. FIPS 140-2 is administered by the National Institute of Standards & Technology (NIST), which dictates & validates the level of security for Federal agencies that use cryptographic-based security systems to protect sensitive electronic information. In addition it meets the Common Criteria standards. The Cisco Aironet 1240AG Series is part of the award-winning Cisco Wireless Security Suite, which supports 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, & numerous Extensible Authentication Protocol (EAP) types. WPA & WPA2 are the Wi-Fi Alliance certifications for interoperable, standards-based WLAN security. These certifications support IEEE 802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, & Advanced Encryption Standard (AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different manufacturers. The Cisco Aironet 1240AG Series hardware-accelerated AES encryption supports enterprise-class, government-grade secure encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are allowed on the network. Backward compatibility & support for WPA client devices running TKIP, the RC4 encryption algorithm is also supported by the Cisco Aironet 1240AG Series. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Cisco Aironet 1240AG Series IEEE 802.11a/b/g access points deliver the versatility, high capacity, security, & enterprise-class features demanded by WLAN customers. It is designed specifically for challenging RF environments like factories, warehouses, & large retail establishments that require the antenna versatility associated with connectorized antennas, a rugged metal enclosure, & a broad operating temperature range. The Cisco Aironet 1240AG Series provides local as well as inline power, including support for IEEE 802.3af Power over Ethernet (Po E). Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...