UK double wall socket with 2 built in USB (Universal Serial Bus) charging ports, the USB (Universal Serial Bus) charge ports can supply a shared maxium current of 2 Amps, ie 2A from 1 port or 1A from both ports. Specifications Working voltage: 13A, 250V Working temperature -15 to 40 C USB (Universal Serial Bus) Output: 2A, 5V UK 3 pin socket output: 13A, 250V Fits any standard back box (minimum depth of 25mm) Safety Information We recommend using a competent person for installation. Only suitable for indoor installations. Before carrying out any electrical work, isolate the mains power supply & refer to the fitting instructions. For safe installation & connection ensure that the earth is connected. Wire/wiring colours are in accordance with the current IET Wiring Regulations Before use we recommend that a socket test is carried out. This device must be installed by a competent person, in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations. Please read these instructions carefully before commencing with installation. Failure to install correctly will negate the product warranty. The Dual Power Socket with Dual USB (Universal Serial Bus) Outlet means that you can charge / power 2x USB (Universal Serial Bus) devices & 2 other electrical items from one double wall plate. The USB (Universal Serial Bus) charging sockets are compatible with items such as smart phones, tablets & other devices that require charging via a USB (Universal Serial Bus) port. The USB (Universal Serial Bus) charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. This dual switched socket will fit any standard dual 25mm deep wall box. Instructions Firstly, ensure you isolate the mains power supply & remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit. Following the diagram over-leaf pass the cable through the entry holes & connect to the appropriate terminal. If an Earth loop connection is required, use the additional earth terminal block located in the back box. Re-connect the mains supply when the installation is correctly completed. Before use we recommend that a socket test is carried out. DO NOT MEGGER TEST this will damage the USB (Universal Serial Bus) charging circuit. ...

The BIP326 LCD wall support offers an optimal viewing position thanks to 2 pivot points & the turn & tilt possibility. With the cable clips you can guide your cables. The BIP326 is a member of a complete product line, the Original series, & is a proven, solid solution. Mount your LCD/TFT to the wall to free up space & give your interior a stylish look. ...

Main Features Panasonics vision of the digital future is driven by the needs & aspirations of its business customers & millions of consumers around the world who use its products every day. The company shares their dream to live a fuller life by providing ways of working smarter & enjoying the rewards of technological advances. Specifications

Width: 132 cm

Depth: 7.5 cm

Height: 60.4 cm Weight: 8.3kg

Material: Metal Type: Mounting kit Mounting Components: Wall bracket Recommended Use: Plasma panel Placing / Mounting: Wall-mountable Display

Size: 65"









...

This wall-mount bracket provides 12U of space for mounting shallow rack-mount equipment thats 12 in. deep or less to the wall, such as patch panels or network switches. Improve efficiency and accessibility in your workspace The 12U rack optimizes your working space by efficiently mounting your shallow equipment on your wall instead of taking up desk space or other usable surface areas. It’s the perfect solution for your space-limited So Ho (small office, home office) environment or server room because it doesn’t take up any floor space. Ensure a secure and hassle-free installation The wall rack is constructed of solid steel to ensure a sturdy & safe mounting solution for your mission-critical equipment. Also, because the wall-mount racks mounting holes are positioned 16 in. apart, it exactly matches standard drywall construction framework to ensure simple & secure wall-stud anchoring. The rack also features a rear access panel that can be used to easily run cabling into the rack. Cage nuts & screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware. ...

This wall-mount rack provides 8U of space for mounting your servers or A/V equipment to a wall. The rack has a built-in shelf that you can install at either the top or bottom of the rack, to create a sturdy surface for storing equipment thats not rack-mountable. Customize your setup The wall-mount bracket features a dual-position 12 in. shelf, that depending which way you mount the rack, can be positioned at either the top or the bottom. This shelf gives you a stable surface for placing equipment thats not rack-mountable or storing your tools. Because the shelf can be positioned at either the top or the bottom of your rack, it gives you the freedom to customize your workspace depending on height or applications. The rack also has adjustable mounting depth from 12 in. to 18 in. enabling you to define the depth that exactly fits your equipment, plus any space youd like to have for cabling, ensuring that the rack does not take up any more space than it has to. Make the most of your available space The 8U rack optimizes your working space by mounting equipment to your wall instead of taking up desk or floor space -- perfect for your So Ho (small office, home office) environment, server room or any other location with limited space available. Ensure a secure and hassle-free installation The wall rack is constructed of solid steel to ensure a sturdy & safe mounting solution for your mission-critical equipment. Plus, because the wall mounting holes are positioned 16” apart, it exactly matches standard drywall construction framework, to ensure simple & secure wall-stud anchoring. For hassle-free equipment installation, the rack features 10-32 tapped rails, so you can mount your equipment directly to the rail & avoid the hassle of using cage nuts. To make equipment installation & maintenance even easier, the wall-mount rack also features a rear opening for cable access & tie-off points for built-in cable management. Save money, with a cost-effective, compact shipping package The wall-mount rack comes in a flat-packed box to reduce shipping volume, which significantly reduces your costs in shipping while also providing greater protection than pre-assembled racks offer. Plus, because the rack is packaged efficiently, you can easily store & transport the rack for deployment at a later date or in a different location than where its received. ...

The Wallaboo Soft Changing Bag is made from beautiful soft microfibre Suede which makes this changing bag more than just functional. Its easy to get organised with five pockets with & without zippers, a thermal bottle holder, an adjustable strap with padded panel. The changing bag. Can be carried in two ways: as a shoulder bag or easily attached to the pushchair handles. The bag. Comes with padded changing pad & a zippered dry bag.

Features: Styled with Microfibre Suede & soft plush shearling. Two large inner compartments & special pouch for nappies & wipes. Wide, adjustable strap has padded panel. Two interior zip-closed pockets are. Perfect for soothers, a mobile etc. Two adjustable straps to attach the changing bag to the stroller handles Padded & washable changing mat included. Removable thermal bottle-holder keeps your babys drink warm or cold. Detachable, washable zippered dry bag. Interior lining & its. Features are water resistant, so they. Can be wiped clean. Care instructions: wipe clean. Dimensions: 38 x 30 x 14 cm.

...

The Wallaboo Soft Changing Bag is made from beautiful soft microfibre. Suede which makes this changing bag more than just functional. Its easy to get organised with five pockets with & without zippers, a thermal bottle holder, an adjustable strap with padded panel. The changing bag. Can be carried in two ways: as a shoulder bag or easily attached to the pushchair handles. The bag. Comes with padded changing pad & a zippered dry bag.

Features: Styled with Microfibre Suede & soft plush shearling. Two large inner compartments & special pouch for nappies & wipes. Wide, adjustable strap has padded panel. Two interior zip-closed pockets are. Perfect for soothers, a mobile etc. Two adjustable straps to attach the changing bag to the stroller handles. Padded & washable changing mat included. Removable thermal bottle-holder keeps your babys drink warm or cold. Detachable, washable zippered dry bag. Interior lining & its. Features are water resistant, so they. Can be wiped clean. Care instructions: wipe clean. Dimensions: 38 x 30 x 14 cm.

...

Wallaboo Newborn Footmuff (chocolate): Beautiful newborn Footmuff in chocolate. This wonderfully soft & perfectly sized Footmuff is made from microfibre suede & expertly trimmed with plush shearling ensuring a snug & comfortable fit. Made for ease of use: no need to put on a jacket or extra clothing while going out. With the Wallaboo Footmuff your little one stays warm snug & comfortable. Keeps the car seat clean & stain free. Suitable for up to 12 months or 21 lbs. made from soft Microfibre Suede that has wind breaking qualities yet breathes at the same time Supersoft lining of soft, warm plush shearling gives your baby a protected feeling Perfect in a infant car seat, pram, carrycot or a front bike seat Removable top Head part forms a hood to keep your babys head warm & protected Double zippers that run the length of each side for easy temperature control 5 openings for all 3 point harness systems The harness straps are placed directly on the child to fit snugly Machine washable Measures 42 cm. by 72 cm. (16.5 inch x 28 inch). ...

Wallace & Gromit Original Plush Gromit 20cm Is that you Gromit? Well yes. Duh. It is Gromit. A sitting Gromit at that
- the
...

This is a cracking jigsaw Gromit. A 1000 piece jigsaw puzzle with images of the official 2010 Royal Mail 1st Class Xmas stamp featuring Wallace & Gromit. YIKES! A jigsaw puzzle with 1, 000 pieces! Looks like were in for a cracking challenge here. A fantastic official Royal Mail Special Stamp issue jigsaw puzzle, featuring Gromit & the Penguin, a great gift idea for any fan of Wallace & Gromit. This giant puzzle will keep you occupied for hours (and if you love it, you can always buy the 2nd Class version too!) ...