&
- ; 4K &
- ; HDMI version 2.0 &
- ; gold plated connectors &
- ; ethernet &
- ; HDMI (M) to HDMI (M) &
- ; outer





...

Cable HDMI with Ethernet cable American Wire Gauge (AWG) 30 Length 3 m Colour White Connector Mini HDMI
- male Connector (Second
...

Product Description: Vision Techconnect
- Display Port cable
- 5 m Type: Display Port cable

Features:



...

Manufacturer's Part Number: TC 15M3.5MM Product Description: VISION Techconnect
- audio cable
- 15 m Cable: Audio cable Length:

...

The Techconnect is a modular family of products designed to suit any IT, AV, pro audio, office, or home cinema installation. It is simple enough that even a moderately experienced technician can easily install it, & it doesn't require soldering at all due to its phoenix connector captive screw design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want, & swap it out. ...

&
- ; 4K &
- ; HDMI version 2.0 &
- ; gold plated connectors &
- ; ethernet &
- ; HDMI (M) to HDMI (M) &
- ; outer





...

Plugs into HDMI port on a laptop Converts digital HDMI signal into analog VGA signal HDMI-A (male) to VGA 15-pin D-Sub (female) Maximum resolution: 1920x 1080 at 60 Hz (1080p Full HD) ...

Designed for video signage applications the Techconnect Matrix allows distribution of HDMI content over an existing managed LAN infrastructure. Because of this the cost of deployment is radically lower than bespoke AV distribution systems. Features Matrix modes It supports point-to-point, point-to-multiple, and multiple-to-multiple matrixing. MJPEG compression It converts the video into TCP/IP packets using proprietary MPEG compression. The audio & vision are compressed together ensuring no delay issues at the receiver which may lead to out-of-sync audio on a busy network. RS-232 Not only can it distribute video & audio;it can also RS-232 transmit 2-way control signal to the display devices. Cascading network switches The signal can be transmitted to any point on the LAN through any number of network switches. Or two devices can bypass the LAN & connect directly to each other. Note:used in this way the devices still need addressing during installation. HDCP compliant Techconnect Matrix supports HDMI with full HDCP compliance. Power over Ethernet (Po E) A power supply is included for each node, but the transmitters & receivers can also use standard Power over Ethernet (Po E) to operate. Many network switches output Po E, or injectors can be fitted to a network to add Po E to a network. ...

The Techconnect range features an attractive architectural front surround system making it suitable for corporate & home-cinema applications, plus robust clip-in modules which make it super-quick to install & flexible. It allows seamless integration of connectivity, audio, & control. Plug-In Cables Modules feature plug-in connectors on the rear. Cables come pre-terminated with male connectors which are simply plugged into the rear of the module. Need to shorten or pull a cable? Just unscrew the captive-screw connector. Techconnect gives you the speed of a pre-terminated system with the flexibility you sometimes need. More Space By using multi-layer printed circuit boards we’ve created much more space behind each module for cables. The depth of the VGA module being just 38mm from the front of the module to the rear. Backboxes The Techconnect packages come with a surface-mounted ‘backbox’ & a ‘surround’ – the part the modules clip into. The range

Includes:: various flush & surface mounting backboxes, & all the surrounds conform to standard British sizes so they fit any locally sourced backboxes. Vision also offers Australian & American surrounds which conform to local standards. Backboxes are carefully designed with convenient easy-push-out sections for trunking & are made from flexible non-marking plastic so are not brittle like common backboxes. Quick & Easy Simple enough that even an inexperienced technician can install it. No soldering is necessary due to its captive screw connector design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want & swap it out. Plug-&-Play Connectivity Unlike cheap VGA cable, Vision’s quality cable has SDA & SCL data lines to support DDC2B (Display Data Channel) which allows the display device to communicate its supported display modes. Without these the user will not experience play-&-play connectivity & will have to manually setup resolution & color bit depth. Installation-Grade Cable When choosing cable don’t be fooled by a thick cable jacket. Does it have adequate copper? Is it shielded evenly to prevent ghosting? A major cost component of cables is copper, so cheap cables have less copper. Compromising can result in cable which doesn’t support high resolutions, & results in flagging or image jitter. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Plus Ferrite Cores included on VGA cables to eliminate radio-frequency induction noise.

...

The Techconnect range features an attractive architectural front surround system making it suitable for corporate & home-cinema applications, plus robust clip-in modules which make it super-quick to install & flexible. It allows seamless integration of connectivity, audio, & control. Plug-In Cables Modules feature plug-in connectors on the rear. Cables come pre-terminated with male connectors which are simply plugged into the rear of the module. Need to shorten or pull a cable? Just unscrew the captive-screw connector. Techconnect gives you the speed of a pre-terminated system with the flexibility you sometimes need. More Space By using multi-layer printed circuit boards we’ve created much more space behind each module for cables. The depth of the VGA module being just 38mm from the front of the module to the rear. Backboxes The Techconnect packages come with a surface-mounted ‘backbox’ & a ‘surround’ – the part the modules clip into. The range

Includes:: various flush & surface mounting backboxes, & all the surrounds conform to standard British sizes so they fit any locally sourced backboxes. Vision also offers Australian & American surrounds which conform to local standards. Backboxes are carefully designed with convenient easy-push-out sections for trunking & are made from flexible non-marking plastic so are not brittle like common backboxes. Quick & Easy Simple enough that even an inexperienced technician can install it. No soldering is necessary due to its captive screw connector design. The modules are interchangeable, so if in the future you require a different connector to be installed, you can simply buy just the module you want & swap it out. Plug-&-Play Connectivity Unlike cheap VGA cable, Vision’s quality cable has SDA & SCL data lines to support DDC2B (Display Data Channel) which allows the display device to communicate its supported display modes. Without these the user will not experience play-&-play connectivity & will have to manually setup resolution & color bit depth. Installation-Grade Cable When choosing cable don’t be fooled by a thick cable jacket. Does it have adequate copper? Is it shielded evenly to prevent ghosting? A major cost component of cables is copper, so cheap cables have less copper. Compromising can result in cable which doesn’t support high resolutions, & results in flagging or image jitter. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Plus Ferrite Cores included on VGA cables to eliminate radio-frequency induction noise.

...