The latest addition to the Edge MAX family, the Edge Router provides higher performance (2M packets per second) & powerful Edge OS software. The Edge Router is rack mountable & has 8 Ethernet ports (Edge Router) or 6 Ethernet ports & 2 SFP ports (Edge Router Pro). ...

Build & expand your network with Ubiquiti Networks Edge Switch, part of the Edge MAX line of products. The Edge Switch is a fully managed, Po E+ Gigabit switch, delivering robust performance & intelligent switching for growing networks. The Edge Switch offers an extensive suite of advanced Layer-2 switching features & protocols, & also provides Layer-3 routing capability. ...

Build & expand your network with Ubiquiti Networks Edge Switch Fiber, part of the Edge MAX line of products. The Edge Switch Fiber is a fully managed, Gigabit fiber switch, delivering robust performance & intelligent switching for high-bandwidth networks. The Edge Switch Fiber offers an extensive suite of advanced Layer-2 switching features & protocols, & also provides Layer-3 routing capability. The Edge Switch Fiber offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the Edge Switch Fiber supports up to 16 Gbps. The Edge Switch Fiber offers high performance & low latency as an aggregation switch. For fiber connectivity, it features 12SFP ports, eight of which also support 100 Mbps. For copper connectivity, the Edge Switch Fiber offers four Gigabit RJ45 ports. ...

The Ubiquiti ES-24-LITE Edge Switch is a 24 port layer 2 managed Gigabit switch to build & expand your businesses network. This Ubiquiti ES-24-LITE is a fully managed, delivering robust performance & intelligent switching for growing networks, while offering an extensive suite of advanced Layer 2 switching features & protocols, with the capability of Layer 3 routing. Key Features Twenty-Four (24) 10/100/1000 Gigabit Ethernet RJ45 Ports. Two (2) small form factor plugin SFP Ports for uplinks. One (1) Serial Console Port. Non-Blocking Throughput: 26 Gbps Switching Capacity: 52 Gbps Forwarding Rate: 38.69 Mpps Maximum Power Consumption: 25W Rack- or Wall-Mountable Quiet, Fanless Operation DC Input Option (Redundant or St&-Alone) ...

Build & expand your network with the Ubiquiti ES-48-750W Edge Switch 48-Port Layer 2 Gigabit Po E+ Switch, part of the Ubiquiti Edge MAX line of products for business. This Ubiquiti ES-48-750W Edge Switch is a fully managed, 48 port Po E+ Gigabit switch that delivers robust performance & intelligent switching for growing networks. This Ubiquiti ES-48-750W Edge Switch also offers an extensive suite of advanced Layer-2 switching features & protocols, & also provides Layer-3 routing capability. Key Features Layer-2 features & protocols with layer-3 routing capability. Forty-eight (48) 10/100/1000 Gigabit Ethernet RJ45 ports. Two (2) Small form factor SFP ports for 1 Gigabit uplinks. Two (2) Small form factor SFP+ ports for 10 Gigabit uplinks. 802.3at Power over Ethernet (Po E+) up to 30W per port. Supports Passive Power over Ethernet (Po E) up to 24V. Configure & monitor the switch in GUI or CLI interface. Total Power over Ethernet budget of 750W. Total, non-blocking throughput: 70 Gbps. Rackmount form factor for data or server cabinets. Power over Ethernet Flexibility The Ubiquiti ES-48-750W Edge Switch comes with 48 Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at & configurable 24V Passive Po E to simplify your infrastructure. By default, the Ubiquiti ES-48-750W Edge Switch automatically detects 802.3af/at devices so they automatically receive Po E. For 24V Passive Po E devices, manually enable 24V passive Po E using the switches configuration Interface. Fibre Connectivity The Ubiquiti ES-48-750W Edge Switch provides fibre connectivity options for your growing networks. This Ubiquiti ES-48-750W Edge Switch include two small form factor (SFP) ports, providing up to 1 Gbps uplinks & two small form factor (SFP+) ports providing up to 10 Gbps uplinks. Powerful Functionality The Ubiquiti ES-48-750W Edge Switch uses a sophisticated operating system that provides basic switching features, Po E configuration per port, & a variety of advanced features including: MSTP/RSTP/STP. VLAN, Private VLAN, Voice VLAN. Link Aggregation. DHCP Snooping, IGMP Snooping. TACACS+, RADIUS, 802.1x, MAC Filtering, ACL. Diff Serv, Co S. Static Routing, Policy-Based Routing. ...

INS-3AF-I-G Instant Po E Converter The Instant 802.3af Adapter transforms almost any Ubiquiti Po E (Power over Ethernet) device into a fully compliant 48V, 802.3af-compatible product. The Instant 802.3af Adapter works seamlessly with a variety of 802.3af switches for remote power control applications. As you manage & monitor your network, you can conveniently power or power cycle your remote devices using your 802.3af switch. ...

The Lite Beam AC is an ultra-lightweight air MAX ac CPE device with incredible range & disruptive pricing. Management Wi-Fi Radio The Lite Beam AC integrates a separate Wi-Fi radio for fast & easy setup using your mobile device. enhanced Mounting & Surge Protection Featuring enhanced protection against ESD events, the Lite Beam AC offers a more robust mount with separate azimuth & elevation adjustments. Now with air OS 8 & air View air OS 8 provides powerful features, including air MAX ac protocol support, real-time RF analytics, & an all-new design for enhanced usability. High-Gain, Directional, 2x 2 MIMO Antenna The Lite Beam AC provides 23 d Bi of gain for long-distance connectivity & uses a directional antenna pattern for enhanced noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the Lite Beam AC fully assembles in seconds no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the Lite Beam AC is ideal for shipping & logistics. ...

Loco M5 Ubiquiti Networks sets the bar for the world's first low-cost & efficient broadband Customer Premises Equipment (CPE) with the original Nano Station. The Nano Station M & Nano Stationloco M take the same concept to the future with sleek & elegant form factors, along with integrated air MAX (MIMO TDMA protocol) technology. The low cost, high performance, & small form factor of Nano Station M & Nano Stationloco M make them extremely versatile & economical to deploy.

Features: Versatile Mounting enhanced Surge Protection Efficient Footprint Quick Installation

...

Innovative Industrial Design Weighing in at only 7.4 kg, the Rocket Dish LW is engineered with ruggedized yet lightweight components to withstand harsh outdoor conditions. Plug & Play Integration The Rocket Dish LW has a built-in Rocket™ mount, so no tools are needed to install the Rocket Base Station. Optional Isolator Radome The Iso Beam™ enhances isolation performance for co-location & features an integrated protective radome. Optional Alignment Accessory The Precision Alignment Kit enables extremely accurate aiming for optimal link performance. ...

Ubiquiti Networks launches the latest generation of air MAX CPE (Customer Premises Equipment), the Power Beam 5AC Gen 2, with dedicated Wi-Fi management. Improved Noise Immunity The Power Beam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the Power Beam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is enhanced. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. Integrated Design Ubiquiti’s Inner Feed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance & innovative design, the Power Beam 5AC Gen 2 is versatile & cost-effective to deploy. Softwareair OS 8 is the revolutionary operating system for Ubiquiti air MAX ac products. Powerful Wireless Features• Access Point Pt MP air MAX Mixed Mode• air MAX ac Protocol Support• Long-Range Pt P Link Mode• Selectable Channel Width• Pt P: 10/20/30/40/50/60/80 MHz• Pt MP: 10/20/30/40 MHz• Automatic Channel Selection• Transmit Power Control: Automatic/ Manual• Automatic Distance Selection (ACK Timing)• Strongest WPA2 Security Usability Enhancements• air Magic Channel Selection Tool• Redesigned User Interface• Dynamic Configuration Changes• Instant Input Validation• HTML5 Technology• Optimization for Mobile Devices• Detailed Device Statistics• Comprehensive Array of Diagnostic Tools, including RF Diagnostics & air View Spectrum Analyzer Unlike standard Wi-Fi protocol, Ubiquiti’s Time Division Multiple Access (TDMA) air MAX protocol allows each client to send & receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions & maximizes airtime efficiency, so air MAX technology provides performance improvements in latency, noise immunity, scalability, & throughput compared to other outdoor systems in its class. Intelligent Qo S Priority assigned to voice/video for seamless streaming. Scalability High capacity & scalability. Long Distance Capable of high-speed, carrier-class links. Superior Performance The next-generation air MAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti’s air MAX engine with custom IC dramatically improves TDMA latency & network scalability. The custom silicon provides hardware acceleration capabilities to the air MAX scheduler, to support the high data rates & dense modulation used in air MAX ac technology. Throughput Breakthroughair MAX ac supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in air MAX. With their use of proprietary air MAX ac technology, air MAX ac products supports up to 450+ Mbps real TCP/IP throughput – up to triple the throughput of standard air MAX products. Advanced RF Analyticsair MAX ac devices feature a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum & every received symbol to provide you with the most advanced RF analytics in the industry. Real-Time Reportingair OS 8 displays the following RF information:• Persistent RF Error Vector Magnitude (EVM) constellation diagrams• Signal, Noise, & Interference (SNI) diagrams• Carrier to Interference-plus-Noise Ratio (CINR) histograms Spectral Analysisair View means that you can identify noise signatures & plan your networks to minimize noise interference. air View performs the following functions:• Constantly monitors environmental noise• Collects energy data points in real-time spectral views• Helps optimize channel selection, network design, & wireless performance In air View, there are three spectral views, each of which represents different data: waveform, waterfall, & ambient noise level.air View provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.UNMS App The Power Beam 5AC Gen 2 integrates a separate Wi-Fi radio for fast & easy setup using your mobile device. Accessing air OS via Wi-Fi The UNMS™ app provides instant accessibility to the air OS configuration interface & can be downloaded from the App Store (i OS) or Google Play™ (Android). UNMS means that you can set up, configure, & manage the Power Beam 5AC Gen 2 & offers various configuration options once you're connected or logged in. Hardware Overview The Power Beam 5AC Gen 2 supports up to 450+ Mbps real TCP/IP throughput & features enhanced surge protection. Innovative Mechanical Design• Built-in mechanical tilt Mounting bracket conveniently offers elevation adjustments: ± 20° tilt.• Quick assembly Minimal fasteners simplify installation.• Easy removal The antenna feed can be detached with the push of a button. Industrial-Strength Construction• Fasteners GEOMET-coated for enhanced corrosion resistance when compared with zinc-plated fasteners. • Dish & brackets made from galvanized steel that is powder-coated for superior corrosion resistance. The hardware also prevents paint from being removed from the metal brackets for enhanced corrosion resistance.• Optional support In high-wind environments, you can enhance support with additional hardware (not included).PBE-5AC-Gen 2 The dish reflector design of the PBE-5AC-Gen 2 makes it an ideal CPE for deployments requiring maximum performance. A protective radome is available as an optional accessory for the PBE-5AC-Gen 2. Model Frequency PBE-5AC-Gen 2 Dish R PBE-5AC-ISO-Gen 2 The PBE-5AC-ISO-Gen 2 offers a rear housing with a metal-plated interior, designed to enhance RF shielding. in addition, an included protective radome shields the Power Beam 5AC ISO Gen 2 from nature's harshest elements. Breakthrough RF Isolation The integrated isolator design spatially filters out interference, so the PBE-5AC-ISO-Gen 2 delivers enhanced noise immunity in co-location deployments. Compare the two near-field plots below, & note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts & use a linear scale. The strength of the electromagnetic field is color-coded:• Red: Highest strength• Green: Medium strength• Indigo: Lowest strength ...