Tripp Lite's 13U 4-Post Open Frame Rack helps IT managers organize their equipment array & provides fast, easy access to installed IT equipment. The SR4POST13 is a simple solution for housing IT equipment in secure environments & other areas that don’t require a lockable rack solution. This 13U rack features heavy-duty cold-rolled steel construction with a black powder-coated finish for durability. It supports stationary loads up to 1000 lb. The SR4POST13 comes with all the hardware required for assembly & has a self-squaring design with bolt-down provisions. For high-density applications, multiple units can be bolted together side by side. The open design of the SR4POST13 provides unobstructed airflow & easy access to equipment & cabling. It has numbered, square-hole mounting positions for easy installation of standard 19-inch rack equipment. The SR4POST13 supports equipment depths from 22 to 36 inches. This rack also accommodates toolless button-hole mounting for vertical PDUs & cable managers. Features Supports 1000lbs of rackmount equipment Adjustable mounting depth (22 to 36 inches) Textured powder coat finish Heavy-duty cold-rolled steel construction Numbered mounting positions Bolt down provisions Self squaring design Black finish Easy assembly ...

The Tripp Lite SRVRTBAR provides additional vertical mounting for cable management & vertical PDU products. Each bar



...

The SRW6UKD Smart Rack 6U Low-Profile Switch-Depth Knock-Down Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where you need equipment to be secure, organized & out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 90 kgs (200 lbs.) The front door locks securely to help prevent damage, tampering & theft. The front, top, bottom & side panels are vented, which allows air to flow freely & keep equipment cool. The reversible front door can be installed to open left or right. Convenient top & bottom ports allow easy cable routing. The SRW6UKD comes unassembled for convenient transport & storage in confined spaces. It easily assembles in minutes using just 12 fasteners, & mounts to the wall to save valuable floor space. Square & threaded mounting holes & numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches & patch panels. Saves Valuable Workspace &9679; Perfect for network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where you need equipment to be secure, organized & out of the way &9679; Houses EIA-standard 19 in. rack equipment in 6U of space &9679; Maximum load capacity of 90 kgs (200 lbs) Keeps Important Equipment Secure &9679; Front door locks securely to help prevent damage, tampering & theft &9679; Vented panels allow generous airflow that keeps equipment cool &9679; Reversible front door can be installed to open left or right &9679; Convenient ports with removable covers allow cable routing through top & bottom Ships Unassembled &9679; Knock-down shipping for convenient transport & storage in confined spaces &9679; Assembles in minutes using just 12 fasteners &9679; Wall-mounting holes spaced 16 in. apart for standard wall stud placement Easy Equipment Installation &9679; Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 16.5 in. deep, such as network switches & patch panels &9679; Rails adjust easily—unscrew them, slide them to desired depth, & screw them back in &9679; Rails support square-hole or threaded-hole mounting &9679; Rack spaces numbered for easy reference Meets Payment Card Industry Standards &9679; Provides physical equipment & media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance &9679; Ships unassembled for easy transport & storage &9679; Maximum load capacity of 91 kgs (200 lbs.) &9679; Locking steel cabinet vented at sides, front, top & bottom &9679; Flow-through ventilation keeps equipment cool &9679; Mounts to wall to save valuable floor space Package

Includes:: &9679; Owner’s manual Assembly Hardware &9679; (2) Top/bottom panels &9679; (2) Side panels &9679; Front door &9679; (2) Vertical mounting rails &9679; (24) M6 screws &9679; (4) M6 cage nuts &9679; (4) M6 cup washers &9679; (2) Keys Equipment Mounting Hardware &9679; (12) 12-24 screws &9679; (12) M6 cage nuts &9679; (12) M6 cup washers

...

The SRW6U 6U Wall Mount Rack Enclosure Cabinet is designed to integrate wall-mounting, easy equipment access, & cable management in IT network applications with limited floor space. Ventilated front door & side panels allow generous airflow to keep equipment operating safely. Adjustable rack rails with square mounting holes accommodate up to 6U of standard 19" rackmount equipment. Supports up to 140 lbs of equipment. A sturdy wall-mount bracket allows the cabinet to quickly be hung on the wall. ...

Tripp Lite Smart Rack Hardware Kit
- Connects SRCABLELADDER to a wall or Open Frame Rack. Product

Colour:


...

Tripp Lite's Smart Rack SRCABLETRAY safely routes cables across the top of an enclosure. When cabinets are lined in a row, these trays create a dedicated path for cables helping to eliminate cable stress. The SRCABLETRAY organizes cables outside of the Smart Rack enclosure. It offers toolless mounting to the top of the rack panel & a grounding stud is provided to allow tie-in to the enclosure & the facility ground. &9679; Tripp Lite's Smart Rack SRCABLETRAY safely routes cables across the top of an enclosure &9679; When cabinets are lined in a row, these trays create a dedicated path for cables helping to eliminate cable stress &9679; The SRCABLETRAY organizes cables outside of the Smart Rack enclosure &9679; It offers toolless mounting to the top of the rack panel & a grounding stud is provided to allow tie-in to the enclosure & the facility ground &9679; Safely routes cables across the top of an enclosure &9679; When cabinets are lined in a row, these trays create a dedicated path for cables &9679; Helps eliminate cable stress &9679; Organizes cables outside of Smart Rack enclosure &9679; Toolless mounting on the Smart Rack enclosure's top panel &9679; Grounding stud provided to allow tie-in to the enclosure & facility ground Package

Includes:: &9679; Safely routes cables across the top of an enclosure

...

Tripp Lite Smart Rack SRWF4U 4U Wall Mountable Rack Cabinet for Patch Panel, LAN Switch
- 482.60 mm Rack Width x 508 mm Rack Depth
-

...

Tripp Lite SNMP/ Java-free Web Management Accessory Card for compatible UPS Systems. Product type: Network management card. Host interface: 26-pin. Ethernet interface type: Fast Ethernet, Ethernet LAN data rates: 10, 100 Mbit/s, Cabling technology: 10/100 Base T (X). Supported network protocols: IPv 6, HTTP, HTTPS, SMTP, SNMPv 1, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP & SCP. Package

Width: 152.9 mm, Package

Depth: 154.9 mm, Package

Height: 40.9 mm The TLNETCARD turns a compatible Smart Pro or Smart Online UPS with an accessory slot into a device you can manage on your network. By inserting the TLNETCARD into the slot & using an SNMP network management platform, web browser, SSH or Telnet, you can monitor & control the UPS in your server room, data center or network closet. The TLNETCARD's intuitive web interface does not require the Java Runtime Environment (JRE) Keep an eye on site electrical data, UPS device status & logged power-related events, such as blackouts, brownouts & overvoltages. Reboot locked network equipment remotely without disrupting power to other devices when using the TLNETCARD with controllable outlets or remotely switchable outlets available on select Tripp Lite UPS systems. Tiered access allows three levels of permissions to be assigned to users for monitoring or controlling the UPS. If an electrical or UPS-related problem occurs on-site, you’ll be notified immediately via email or SNMP trap. The TLNETCARD lets you configure & schedule automatic UPS-driven actions, perform UPS-related tests & shutdowns, upgrade firmware & upload configurations from the web interface. Multiple protocols are supported, including IPv 6, HTTP, HTTPS, SMTP, SNMPv 1, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP & SCP. DHCP/manual configuration support enables network settings to be assigned automatically or manually.
- Enables remote UPS management from virtually anywhere in the world
- Sends user-configurable alerts via SNMP or email
- Allows mass configuration & updating of multiple units using TLNET Configurator utility
- Logs power events, alerts & electrical data
- Web interface does not require the Java Runtime Environment
- Allows a compatible* Tripp Lite Smart Pro or Smart Online UPS system to become a network device that can be managed from anywhere across the globe
- Lets IT managers remotely monitor site electrical data, UPS device status & logged power-related events
- Allows for rebooting of locked network equipment without disrupting power to other loads (when used with controllable outlets or remotely switchable outlets on select UPS systems)
- Supports an optional TLNETEM module for monitoring ambient temperature & humidity, as well as up to four alarm, security & telecom devices
- Three tiers of permissions can be assigned to users for monitoring or controlling the UPS
- Multiple users can view activity simultaneously
- Monitor & manage remotely via Telnet, SNMP, SSH or the web (Java Runtime Environment not required)
- Import an SSL Certificate for encrypted web browser use
- The TLNET Shutdown Agent software enables shut down of remote Operating Systems over the network.
- The TLNET Configurator utility allows users to push configurations & firmware updates onto one or more TLNETCARDs
- Supports multiple protocols, including IPv 6, HTTP, HTTPS, SMTP, SNMPv 1, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP & SCP
- 10/100 Mbps auto-sensing ensures optimal communication compatibility with current 10/100 Base-T network
- DHCP/manual configuration support enables automatic or manual assignment of network settings * See Resources section for a list of compatible devices























...

Tripp Lite's SR2POST 2-Post Smart Rack Open Frame Rack is an economical way to accommodate 45U of rack space for 19-inch rack mount applications where space is at a premium. Its heavy-duty, aluminum construction can safely support 800 lbs (362.9 kgs) of rackmount equipment. The black, textured power coat finish makes it resistant to scratching while giving it a classic, attractive appearance. The SR2POST is easy to install due to a self-squaring design combined with 12-24 threaded & numbered mounting holes, & bolt down provisions. Only standard hand tools are required for installation (9/16" wrench & 9/16" socket/ratchet). Multiple units can be bolted together side by side for easy expansion or customization when required. The SR2POST 2-Post Smart Rack Open Frame Rack has been approved by EIA-310-D, IEC 60297-3-100, & Ro HS, & is backed by a 5-year warranty. Supports 800 lbs (362.9 kgs) of rackmount equipment Textured powder coat finish Heavy Duty Aluminum construction 12-24 threaded & numbered mounting positions Bolt down provisions Self squaring design Black finish Toolless button keyhole mounting slots accept PDUs & cable managers Easy assembly ...

Tripp Lite SR45UBSP1. Maximum weight capacity: 1360.8 kg, Type: Freestanding rack, Product

Colour: Black.

...