The N254-024-SH-6A 24-Port 1U Rack-Mount STP Shielded Cat 6a Feedthrough Patch Panel meets or exceeds Cat 6a specifications & works with USOC, T568A & T568B wiring to comply with industry standards. Fully rated for 10 Gbps Ethernet data transfer speeds, this low-profile patch panel manages & organizes the cabling in your high-density network. No 110 punchdown termination is required. Just plug your Cat 6a cables into the 24 fully shielded RJ45 coupler jacks on both sides of the panel. The detachable cable management bar keeps patch cables neat, tidy & efficiently organized on the back of the panel. Ports are clearly numbered & labeled to help you identify connections. Mounts easily into 1U of an EIA-standard 19-inch rack. Grounding wire included. ...

Tripp Lite 2U Cantilever Fixed Shelf (60 lb / 27kg capacity; 21 in. / 533.4 mm depth.). Type: Rack shelf, Product



...

Tripp Lite 2U Smart Rack Low-Profile Wall-Mount Rack Enclosure Cabinet Vertical-Mount Server-Depth. Rack capacity: 2U, Type: Wall mounted rack, Maximum weight capacity: 68 kg.

Size: 48.3 cm (19"),

Width: 650.2 mm,

Depth: 114.3 mm. Package

Width: 789.9 mm, Package

Depth: 239.8 mm, Package

Height: 1220 mm The SRWF2U36 Smart Rack 2U Low-Profile Vertical-Mount Server-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where you need equipment to be secure, organized & out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 68 kgs (150 lbs.) Because the low-profile cabinet mounts vertically, it extends less than five inches from the wall while housing equipment up to 36 inches deep, including 1U servers, UPS systems, battery packs & switches. In addition to 2U of rack space in the primary mounting area, it also

Includes:: a slide-out 1U mounting bracket at the top of the enclosure for patch panels up to 2.5 inches deep. The front door locks securely to help prevent damage, tampering or theft. The cabinet is vented, which allows air to flow freely & keep equipment cool. The reversible front door can open left or right. Convenient top & bottom ports allow easy cable routing. The SRWF2U36 comes fully assembled & ready to mount to the wall. Equipment installation is easy with threaded mounting holes & hardware that support M6 or 12-24 mounting.
- Maximum load capacity of 68kg (150 lb)
- Locking steel cabinet vented to keep equipment cool
- Secures 2U of 19 in. rack equipment up to 36 in. deep
-

Includes:: additional 1U of space for patch panels
- Ships fully assembled for quick installation
- Perfect for network wiring closets, retail locations, classrooms, back offices & other areas with limited floor space where you need equipment to be secure, organized & out of the way
- Houses EIA-standard 19 in. rack equipment in 2U of space
- Low-profile vertical-mount cabinet extends less than 5 in. from the wall while housing equipment up to 36 in. deep, including 1U servers, UPS systems, battery packs & switches
- Also

Includes:: a slide-out 1U mounting bracket at the top of the enclosure for patch panels up to 2.5 in. deep
- Maximum load capacity of 68 kgs (150 lbs)
- Reversible front door locks securely to help prevent damage, tampering or theft
- Front door latch also accommodates a user-supplied padlock for added security
- Vented cabinet keeps equipment cool
- Convenient ports with removable covers allow cable routing through top & bottom
- Ships fully assembled for quick installation
- Wall-mounting holes spaced 16 in. apart for standard wall stud placement
- Rails adjust easily—unscrew them, slide them to desired depth, & screw them back in
- Threaded mounting holes support M6 or 12-24 mounting
- Rack spaces marked for easy reference
- Provides physical equipment & media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance





































...

Tripp Lite 3 phase Monitored PDU / Power Distribution Unit offers real-time remote monitoring of voltage, frequency & load levels via built-in network connection. Power Alert interface supports custom notification of user-specified remote conditions via email, secure web, SNMP, Telnet or SSH interface. PDU output current consumption in amps is displayed per-phase via front panel lighted digital display & can be monitored remotely to warn of potential overloads before critical IT mains breakers trip. Features 11k W 3 phase 380/400V input, 220/230V output Monitored Power Distribution Unit (PDU) with built-in web/network interface Attached IEC-309 Red 16A (3P+N+E) 380/400V 3 phase input plug with.9m cord 0U / 178cm vertical form factor supports installation in 2 or 4 post equipment racks 36 total 220/230V outlets (30 C13, 6 C19) arranged in 3 single-phase output load banks Lighted display with scroll-button reports power consumption in amps for all 3 loading banks, IP-address self-identification & 180 degree display rotation for overhead or raised floor power feeds. Built-in SNMP/ Ethernet interface reports voltage, frequency & PDU loading per-phase via network or secure web browser interface with options for user specified alarm & notification thresholds DHCP/ Manual configuration support 10/100 Mbps auto-sensing allows optimal communication with 10/100 Base-T networks Real-time clock backup maintains the time of day & date even if the PDU is not powered on Tiered access privileges allow an administrator & a guest to login via web browser for monitoring Alert notifications via email or SNMP traps offer immediate event notification Firmware upgrade ability supports future product enhancements. Supports HTTP, HTTPS, Power Alert Network Management System, SMTP, SNMPv 1, SNMPv 2, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols Fully compatible with FREE Power Alert Network Management System / NMS Software Included cord retention brackets keep vital network equipment plugged in & continuously powered Toolless mounting supported in button-mount compatible racks, plus nut-&-bolt mounting brackets for other mounting applications (set of 2 9mm buttons pre-installed, 2 9mm & 4 6mm spare buttons included) ...

Tripp Lite 3 phase Switched PDU / Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption per-phase or per-receptacle. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps per-phase or per-receptacle can be displayed locally via visual meter or remotely via web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. Features 11k W 3 phase 380/400V input, 220/230V output Switched Power Distribution Unit / PDU with built-in web/network interface Attached IEC-309 Red 16A (3P+N+E) 380/400V 3 phase input; 0.9m line cord 0U / 178cm vertical form factor supports installation in 2 or 4 post equipment racks 24 switched 220/230V outlets (21 C13, 3 C19) in 3 single-phase load banks Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis Enables reboot of locked equipment, custom power-on/power-off sequences, load-shedding of optional loads & disabling unused outlets Network interface provides PDU control & data regarding input voltage & per-phase load levels with +/-1% billing-grade accuracy Digital display with scroll-buttons supports per-outlet or per-phase load levels, IP-address self-identification & 180 degree display rotation Supports user-specified alarm notification thresholds DHCP/ Manual configuration support 10/100 Mbps auto-sensing Real-time clock backup maintains the time of day & date even if the PDU is no powered on Tiered access privileges allow an administrator & a guest to login via web browser Alert notifications via email or SNMP traps offer immediate event notification Firmware upgrade ability supports future product enhancements Supports HTTP, HTTPS, Power Alert Network Management System, SMTP, SNMPv 1, SNMPv 2, SNMPv 3, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols Fully compatible with FREE Power Alert Network Management System / NMS Software Included cord retention brackets Toolless mounting supported in button-mount compatible racks, plus nut-&-bolt mounting brackets for other mounting applications (set of 2 9mm buttons pre-installed, 2 9mm & 4 6mm spare buttons included) ...

Tripp Lite 3 phase Switched PDU/ Power Distribution Unit offers advanced network control & monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions & remotely monitor output power consumption per-phase or per-receptacle. Power Alert interface supports remote control & custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up & power-down sequences to ensure proper startup of interdependent IT systems & prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. PDU output current consumption in amps per-phase or per-receptacle can be displayed locally via visual meter or remotely via Web/network interface to warn of potential overloads before critical IT mains or branch breakers trip. ...

Tripp Lite 3.8k W Single-Phase Metered PDU, 200/220/230/240V Outlets (8 C13, 2 C19) IEC-309 16A Blue, 2.43 m (8-ft.) Cord, 1U. PDU types: Metered, Rack capacity: 1U, Mounting: Horizontal. AC outlets quantity: 10 AC outlet (s), AC outlet types: C13 coupler, C19 coupler, Power plug: IEC309. Cable length: 2.5 m, Certification: CE (IEC / EN60950-1), GOST. Nominal input voltage: 200-240 V, Maximum current: 16 A, Nominal output voltage: 200-240 V.

Dimensions (Wx Dx H): 444 x 165 x 28.7 mm, Weight: 3.1kg Tripp Lite Metered PDU / Power Distribution Units offer real-time local reporting of load level in amps via built-in digital meter. Enables visual current monitoring of PDU output current to prevent circuit overloads as additional equipment is added. Offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design

Includes:: rugged all-metal housing & secure rackmount installation with included mounting accessories.
- Metered single phase 16A 200/220/230/240V PDU
- Reversible housing; 6.5 in. / 16.5 cm depth
- 3.8k W 16A single phase 200/220/230/240V Metered Power Distribution Unit / PDU
- Built-in 2 digit visual meter continuously reports PDU load level in amps
- C20 inlet with IEC-309 Blue 16A input; 2.5m line cord
- 1U horizontal rackmount format installs in one rack space
- 10 total outlets (8 C13 / 2 C19)
- Mounting flanges support installation in 2 & 4 post racks, with additional support for wall-mount & under-counter installation formats
- Mounting ears are reversible for front or rear facing rackmount installation
- Front panel grounding lug













...

3000VA / 3k VA / 2500 watt on-line, double-conversion UPS system for critical server, network & telecommunications equipment. 2U rackmount form factor with an installed depth of only 66cm (26 inches). Expandable battery runtime with optional BP72V15-2U (limit 1) & BP72V28RT3U (multi-pack compatible) external battery packs. Full time sine wave 200/208/220/230/240V output with +/-2% voltage regulation. Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 120V & overvoltages to 288V. Up to 97% efficiency in optional economy mode saves BTU heat output & energy costs. C20 inlet accepts a wide variety of optional cordsets. C19 & C13 output receptacles. Network-grade AC surge & noise suppression. Zero transfer time between AC & battery operation. Network management interfaces include USB (Universal Serial Bus) port, DB9 serial port & SNMPWEBCARD slot. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB (Universal Serial Bus) interface enables integration with built-in power management & auto shutdown features of Windows & Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data & mains power conditions via all network interfaces.

Includes:: Power Alert monitoring software & complete cabling. Emergency Power Off (EPO) interface. Integrated two bank PDU switching supports automated load shedding & remote-reboot of connected equipment. Multi-stage metered current monitoring & battery charge status LEDs. Mains power & voltage regulation LEDs. Audible Alarm. Self-test. Fault-tolerant auto-bypass mode. LED display panel easily rotates for better viewing in rackmount or tower configurations.

Includes:: 4 post rackmount installation accessories. 2-9USTAND tower kit & 2POSTRMKITWM two post rackmount & wall-mount hardware accessories available. Field replaceable, hot swappable internal batteries & external battery packs. 3000VA / 3k VA / 2500 watt on-line double-conversion 2U rack / tower UPS 200/208/220/230/240V 50/60 Hz output; High efficiency economy mode option Expandable runtime; Hot-swap batteries USB (Universal Serial Bus), RS232 & EPO ports; support for SNMP/WEB card options Front panel status LEDs with detailed load & battery metering 2 independently switchable output load banks C20 inlet; C13 & C19 outlets Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Extra-Deep Server Cabinet Accommodates 42U of Standard Rack Equipment This Smart Rack 42U rack enclosure is designed for network wiring closets, retail locations, classrooms, back offices & other areas with essential rack-mount IT equipment. It is 1200 millimeters deep & supports mounting of equipment up to 1050 millimeters deep. This allows high-density equipment installations, extra space for cable management, & room for removing hot-swap power supplies from the rear of mounted devices. Constructed from heavy-duty steel with a durable black powder-coated finish, the SRX42UBDPEXP has a maximum stationary load capacity of 1360 kilograms & a maximum rolling load capacity of 1020 kilograms. Keeps Important Equipment Secure The reversible front door & split rear doors lock securely to help prevent damage, tampering or theft. The doors & top panel are designed for quick release, making it easy to access connected equipment & cabling with little effort. Convenient top access ports & an open bottom allow easy cable routing through the cabinet. The vented doors allow generous airflow from front to rear to keep your equipment cool & functioning at their peak. Easy Enclosure & Equipment Installation This 42U server rack comes fully assembled for quick & easy deployment with pre-installed casters that let you maneuver it over a level, smooth, stable surface & through a standard two-meter doorway into position, where it can be stabilized by adjusting the levelers. Four mounting rails adjust in 6.35-millimeter increments to accommodate equipment up to 1050 millimeters deep. Toolless 0U mounting rails allow quick installation of up to four compatible PDUs & vertical cable managers. Designed for Baying Multiple Enclosures in a Row This expansion model comes without side panels for baying with other rack cabinets in a row. Integrated baying tabs make it easy to combine multiple units. This rack is also compatible with hot aisle/cold aisle configurations. Center-to-center width can be set at 600 millimeters to match standard data-center floor tiles. Optional side panels, such as Tripp Lite’s SR42SIDE (sold separately), may be added later if desired. Meets Payment Card Industry Standards The SRX42UBDPEXP provides physical equipment & media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance. This is essential for companies that process, store and/or transmit credit card information. Typical Application &9679; Store & organize deeper-than-usual rack-mount equipment in a network closet, data center or other area where you need components to be secure &9679; 42U rack constructed from powder-coated steel that stands up to tough environments &9679; Front & split rear doors lock securely to help prevent damage, tampering or theft &9679; Ships fully assembled for quick deployment on pre-installed casters &9679; Comes without side panels for easy baying with multiple rack cabinets in a row &9679; Mounting rails accept standard rack equipment up to 1050 mm deep Package

Includes:: &9679; SRX42UBDPEXP 42U Server Rack &9679; (2) Keys &9679; (50) M6 screws &9679; (50) M6 washers &9679; (50) M6 cage nuts &9679; Owner's manual

...

Tripp Lite's SR2400 value Series Smart Rack Enclosure Cabinet is packed with features designed to simplify rack equipment installations ...