More From Contributor

The Trigger Smart Camera Cable for Nikon (CF00974) is a non-standard cable that connects your camera to the UK1 Trigger Smart Controller. This cable is not included as part of the Trigger Smart Kit but can be purchased separately to fit specific cameras when using the Trigger Smart system. The cable has 2.5mm jacks on both ends & is compatible with Nikon D90, D5000, D7000 cameras. For other cameras, a different dedicated cable must be purchased. The cable is an 18 (45.7cm) coiled cable, when not stretched. ...

Available

The Trigger Smart Camera Cable for Olympus (CF00976) is a non-standard cable that connects your camera to the Trigger Smart Controller. This cable is not included as part of the Trigger Smart Kit but can be purchased separately to fit specific cameras when using the Trigger Smart system. The cable has 2.5mm jacks on both ends & is compatible with select Olympus cameras. For other cameras, a different dedicated cable must be purchased. The cable is an 18 (45.7cm) coiled cable, when not stretched. Compatible with: Olympus E520, E510, E420, E410, E400, SP-570 UZ, SP-560UZ, SP-550 UZ, SP-510 UZ. ...

Available

The Trigger Smart Camera Cable for Sony/ Minolta (CF00975) is a non-standard cable that connects your camera to the Trigger Smart Controller. This cable is not included as part of the Trigger Smart Kit but can be purchased separately to fit specific cameras when using the Trigger Smart system. The cable has 2.5mm jacks on both ends & is compatible with select Sony & Minolta cameras. For other cameras, a different dedicated cable must be purchased. The cable is an 18 (45.7cm) coiled cable, when not stretched. Compatible with the Following Cameras Sony A100, A200, A300, A350, A700, A900 Minolta Dynax 3, 4, 5, 7, 9, 5D, 7D, 505si, 600si, 700si, 800si, 807si. ...

Available

The Trigger Smart Camera Trigger Wildlife Kit (TSWL-1) is an additional kit which further enhances the Trigger Smart Camera Trigger Kit (TSMCT-1) Many photographers want to capture wildlife images. Whilst the basic kit is capable of doing this, there are a few extra items which will enhance the operation. This kit allows the user to get started with the intended project, & in most cases no extra hardware will be required. However, some users may want to push the boundaries & experiment further which could mean that extra hardware & cables may be needed. ...

Available

The Trigger Smart Connector 2x 3.5mm (TSJX-35) is a female to female adapter for the Trigger Smart Camera Triggering system. It is 3.5mm female jack on both ends that joins two sensor extension cables to increase the length between the sensors & the Trigger Smart Control Unit. This cable connector does not come included in the Trigger Smart Kit & is an optional accessory to lengthen the sensor cables. ...

Available

Trike
- Grow. Go Deluxe Trike
- MV Sports. The premium trike that adjusts into three different stages as a child grows! Comes

...

Archived Product

A multi-level maths game to support the national numeracy strategy in an entertaining way. Trilemma tests the times tables & other mathematical functions non-sequentially. This challenging game of chance & skill can be played in a mixed age group with different players choosing different levels within the same game. ...

Archived Product

The De Walt cordless trimsaw blades have heavy-duty tungsten carbide tips maintain cutting edge for longer blade life. They have a thin kerf blade design which yields more cuts per charge by minimising battery drain. The triple action sharpening process grinds the tip to a razor sharp edge for a smooth finish. These blades have been specifically designed for use with DEWALT cordless trimsaws. ...

Archived Product

QMot stepper motors 1.8°. The QMot motor is a high-quality European-made product, perfectly matched to the Trinamic control systems. It is a bipolar 2-phase hybrid stepper motor in "high-torque" version with a step resolution of 1.8 ° (200 steps per revolution). The design is rectangular with a flange dimension of 42 mm (NEMA17). Because of the internal construction, it is particularly suitable for micro-stepping operation (µ-stepping). 4 connection stranded wires. Technical data. Operating voltage 0
- 40 Vdc. Angle 1.8 °. Holding torque 0.27 Nm. Max. phase current 1 A. Shaft diameter 5 mm. Shaft length 20 mm. Type QSH4218-35-10-027. Motor length 3.5cm. Flange measurement 42 x 42 mm.
...

Available

QMot stepper motors 1.8°. The QMot motors are high-quality products that are perfectly suited to the Trinamic controls. This is for bipolar 2-phase hybrid stepping motors in "high-torque" version with a step resolution of 1.8 ° (200 steps per revolution) The design is "square" with the flange dimensions: 28 mm (NEMA11), 42 mm (NEMA17), 57 mm (NEMA23) & 60 mm (NEMA24). Because of the internal construction, they are particularly suitable for micro-stepping operation (µ-stepping). 4 connection stranded wires. Technical data: Operating voltage 0
- 84 Vdc. Angle 1.8 °. Holding torque 1.10 Nm. Max. phase current 2.8 A. Shaft diameter 8 mm. Shaft length 25 mm. Manufacturer part no. 50-0045. Type QSH6018-45-28-110. Flange measurement 60 x 60 mm. Motor length 55 mm.
...

Available

Triggersmart Sensor Cable 3m 2.5mm (tscw-1)

The TriggerSmart Camera Cable 3m 2.5mm (TSCW-1) is the standard cable that connects your camera to the TriggerSmart Controller. This cable is included as part of the TriggerSmart Kit but can be purchased separately as a spare or extension cable or to be used with a secondary camera when using the TriggerSmart system. 3m cable has 2.5mm jacks on both ends and is compatible with the following cameras. For other cameras, a dedicated adapter or adapter cable must be purchased.Canon EOS 30/33/50/60D/300/300D/DIGITAL REBEL/350D (XT)/400D (XTi)/450D (XSi)/500D (T1)/550D (T2i)Contax N/645Pentax K110D/K200D/K10D/K20D/*istDS/DS2/DL/DSamsung GX-1S/GX-1L/GX-10/GX-20.

Availability: In Stock
Supplier: Ebuyer
SKU: 543738

Description Reviews / Comments Add New

Product Description

The Trigger Smart Camera Cable 3m 2.5mm (TSCW-1) is the standard cable that connects your camera to the Trigger Smart Controller. This cable is included as part of the Trigger Smart Kit but can be purchased separately as a spare or extension cable or to be used with a secondary camera when using the Trigger Smart system. 3m cable has 2.5mm jacks on both ends & is compatible with the following cameras. For other cameras, a dedicated adapter or adapter cable must be purchased. Canon EOS 30/33/50/60D/300/300D/DIGITAL REBEL/350D (XT)/400D (XTi)/450D (XSi)/500D (T1)/550D (T2i) Contax N/645 Pentax K110D/K200D/K10D/K20D/*ist DS/DS2/DL/DSamsung GX-1S/GX-1L/GX-10/GX-20.

Reviews/Comments

Add New

Supplier Information

Ebuyer

Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.

More From Contributor

Triggersmart Sensor Cable 3m 2.5mm (tscw-1)

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account