TRENDnet’s 10-Port Gigabit Web Smart Po E+ Switch, model TPE-1020WS, delivers a 20 Gbps switching capacity with eight Po E+ Gigabit ports & two Gigabit Ethernet uplink ports shared with two SFP slots. This IPv 6 ready switch offers advanced traffic management, troubleshooting, security, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Fanless rack mountable housing features eight Gigabit Po E+ ports (automatically supplies Po E+ (30 Watts) & Po E (15 Watts)) & two Gigabit Ethernet uplink ports shared with two SFP slots IPv 6 Ready This switch supports IPv 6 configuration & neighbor IPv 6 network support Traffic Management A broad range of network configurations are support by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, GVRP, 802.1p Class of Service (Co S), & Qo S queue scheduling Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aides in rapid troubleshooting Security Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, & RADIUS are compatible with layered security controls Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions Energy Savings Up to 70% energy saving GREENnet technology Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s Gigabit Po E Splitter, model TPE-104GS, networks a non-Po E device in a remote location using a Po E network connection. The TPE-104GS splits a Gigabit Po E connection into separate power & Gigabit data sources. A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements. The included 2 & 2.5 mm jumper cables increase power pin device compatibility. Performance Po E Compatible with Po E (802.3af ) network connections Gigabit Ethernet Supports Gigabit network speeds Adjustable Dip Switch A handy toggle switch adjusts output power to 5 V, 7.5 V, 9 V, or 12 V in order to match non-Po E device power requirements Jumper Cables The included 2 & 2.5 mm jumper cables increase power pin device compatibility with the non-Po E networked device No Power Adapter The TPE-104GS is powered by the Po E connection Mounting Built-in mounting points increase installation flexibility Hardware Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable 2.0 to 2.0 mm 2.0 to 2.5 mm Power Po E network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.) Operating Temperature 0 – 45 °C (32
- 113 °F) Operating Humidity Max. 90% non-condensing

Dimensions 70 x 45 x 25 mm (2.8 x 1.8 x 1 in.) Weight 60 g (2.1 oz.) Certifications CE


...

The Po E+ Injector, model TPE-105I, combines electrical power with a network connection to produce a Power over Ethernet Plus (Po E+) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters (328 ft.) to network Po E+ or Po E devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers 30 Watts to 802.3at Po E+ devices or 15 Watts to 802.3af Po E devices. No need to buy a Po E switch—use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. IEEE 802.3at Po E+ (30 Watts) compliant Backwards compatible with IEEE 802.3af Po E (15 Watt) devices Automatically supplies a Po E+ (30 Watts) or Po E (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100 Mbps Auto-MDIX Data In port 1 x 10/100 Mbps Po E+ Auto-MDIX Data Out port Power port with LED indicator Easily install a Po E+ or POE device where a power outlet is not available Reduce installation & network equipment costs 3-year limited warranty ...

The Gigabit Power over Ethernet injector, model TPE-113GI, combines electrical power with a gigabit network connection to produce a Gigabit Power over Ethernet (Po E) signal. Connect this device to a non-Po E switch & then run an Ethernet cable for up to 100 meters to network Po E devices. No need to buy a Po E switch
- use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated Po E & non-Po E network at gigabit speeds
...

The Gigabit Po E+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (Po E+) signal. Connect this device to a non-Po E Gigabit switch & then run an Ethernet cable for up to 100 meters (328 ft.) to network Po E+ or Po E devices. The integrated power supply reduces installation clutter. Auto sensing technology delivers 30 Watts to 802.3at Po E+ devices or 15 Watts to 802.3af Po E devices. No need to buy a Po E switch—use an existing open port from a non-Po E switch to save installation & equipment costs when installing TRENDnet Po E access points & IP cameras in remote locations. IEEE 802.3at Po E+ (30 Watt) compliant Backwards compatible with IEEE 802.3af Po E (15 Watt) devices Automatically supplies a Po E+ (30 Watts) or Po E (15 Watts) connection to the device Integrated power supply Network devices for distances of up to 100 meters (328 ft.) 1 x 10/100/1000 Mbps Auto-MDIX Data In port 1 x 10/100/1000 Mbps Po E+ Auto-MDIX Data Out port Power port with LED indicator Easily install a Po E+ or POE device where a power outlet is not available Reduce installation & network equipment costs Safeguards network devices with short circuit protection 3-year limited warranty ...

TPE-224WS 26-port Smart Switch integrates power over Ethernet (Po E) & network management features into a cost effective & scalable solution. The TPE-224WS reduces equipment cost by delivering data & power over existing network cable infrastructure. The switch offers advanced network management features such as VLAN & Qo S to meet today's secured network applications. Support for SNMP v 1, 802.1x, STP, 802.1Q VLAN, Qo S, IGMP snooping, Broadcast Storm Control & port Trunking provide a cost effective, scalable & secure backbone Po E switch solution for SMB networks. Power over Ethernet (Po E) technology reduces equipment & installation costs by delivering data & power over existing Ethernet cables. SNMP support enables the switch to provide valuable status & event information, saving system administrators time & resources. Access the Web-browser management interface & segment up to 256 Virtual Local Area Networks, manage network priority with 802.1p support & dedicate bandwidth with port-based Trunking. Reduces equipment cost by delivering data & power over existing network cables 24 x Po E 10/100 Mbps ports, 4 x Gigabit Auto-MDIX ports & 2 x shared Mini-GBIC slots 12.8 Gbps switching capacity with SNMP v 1, 802.1X & STP support Features 802.1Q VLAN, Asymmetric VLAN, Qo S, IGMP, Trunking & Mirroring Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s 28-Port Gigabit Web Smart Po E+ Switch, model TPE-2840WS, offers 4 x Gigabit Po E+ ports (Ports 1-4 802.3at), 20 x Gigabit Po E ports (Ports 5-24 802.3af), 4 x SFP slots, & a Po E Power budget of 185 Watts. This IPv 6 ready switch offers advanced traffic management, troubleshooting, access control, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design
- Provides 4 x Gigabit Po E+ ports (Ports 1-4 802.3at), 20 x Gigabit Po E ports (Ports 5-24 802.3af), 4 x SFP slots, a Po E Power budget of 185 Watts, &

Includes:: rackmount brackets. Smart Fan
- Smart fan saves energy by varying fan speed & use based on cooling needs. IPv 6 Ready
- This switch supports IPv 6 configuration & IPv 6 neighbor discovery. Traffic Management
- A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, Bandwidth Controls, GVRP, IGMP v 1-v 3, 802.1p Class of Service (Co S), Spanning Tree (STP, RSTP, & MSTP), & Qo S queue scheduling. Troubleshooting
- Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aid in rapid troubleshooting. Access Controls
- Features such as ACL, SSL, MAC/port filtering, Denial of Service controls, 802.1X, TACACS+, & RADIUS are compatible with layered network access controls. Monitoring
- RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.








...

TRENDnet’s 48-Port Gigabit Web Smart Po E+ Switch, model TPE-4840WS, offers 12 x Gigabit Po E+ ports (ports 1-12 802.3at), 12 x Gigabit Po E ports (ports 13-24 802.3af), 24 x Gigabit ports (ports 25-48), 4 x shared SFP slots (shared with ports 45-48), & a Po E Power budget of 370 Watts. This IPv 6 ready switch offers advanced traffic management, troubleshooting, access control, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Provides 12 x Gigabit Po E+ ports (ports 1-12 802.3at), 12 x Gigabit Po E ports (ports 13-24 802.3af), 24 x Gigabit ports (ports 25-48), 4 x shared SFP slots (shared with ports 45-48), a Po E Power budget of 370 Watts, &

Includes:: rackmount brackets. Smart Fan Smart fan saves energy by varying fan speed & use based on cooling needs. IPv 6 Ready This switch supports IPv 6 configuration & IPv 6 neighbor discovery. Traffic Management A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, Bandwidth Controls, GVRP, IGMP v 1-v 3, 802.1p Class of Service (Co S), Spanning Tree (STP, RSTP, & MSTP), & Qo S queue scheduling. Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aid in rapid troubleshooting. Access Controls Features such as ACL, SSL, MAC/port filtering, Denial of Service controls, 802.1X, TACACS+, & RADIUS are compatible with layered network access controls. Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions. Features 12 x Gigabit Po E+ ports 12 x Gigabit Po E ports 24 x Gigabit ports & 4 shared SFP slots 370 Watt Po E budget 96 Gbps switching capacity Private/ Voice VLAN, Qo S, & bandwidth controls Smart fans reduce energy consumption Rack mount brackets included Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

TRENDnet’s Gigabit Po E+ Repeater, model TPE-E100, extends a Gigabit Po E/ Po E+ network connection to a remote location. It auto-detects a Po E (15.4 Watts) or Po E+ (30 Watts) signal & extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the Po E device. Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.)*. Handy mounting points & no external power adapter facilitate remote installations. Extension Distance Extends a Po E/ Po E+ network connection an additional 100 (328 ft.) meters for a total distance of up to 200 meters (656 ft.) from the Po E device Po E/ Po E+ Auto detects a 15.4 Watt Po E (IEEE 802.3af class 1-4) or 30 Watt Po E+ (IEEE 802.3at) network connection Gigabit Ports Gigabit ports extend a high performance wired connection Daisy Chain Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.) Plug & Play Plug & play Po E/ Po E+ network cables Po E Powered No external power required—saves installation time & cost Mounting Wall mounting points for remote installations LED indicators LED indicators confirm Po E & network connectivity Housing Rugged metal enclosure Features Extends 100 meters for a total distance of up to 200 meters (656 ft.) Daisy chain two TPE-E100s for a total Po E+ network extension of 300 m (980 ft.) Plug & play installation No external power required Wall mountable LED indicators Rugged metal housing ...

TRENDnet’s Gigabit Po E+ Repeater, model TPE-E100, extends a Gigabit Po E/ Po E+ network connection to a remote location. It auto-detects a Po E (15.4 Watts) or Po E+ (30 Watts) signal & extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the Po E device. Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.)*. Handy mounting points & no external power adapter facilitate remote installations. Extension Distance Extends a Po E/ Po E+ network connection an additional 100 meters for a total distance of up to 200 meters (656 ft.) from the Po E device Po E/ Po E+ Auto detects a 15.4 Watt Po E (IEEE 802.3af class 1-4) or 30 Watt Po E+ (IEEE 802.3at) network connection Gigabit Ports Gigabit ports extend a high performance wired connection Daisy Chain Up to 7 units for a Po E+ (802.3at) network connection Up to 4 units for a Po E (802.3af) network connection Plug & Play Plug & play Po E/ Po E+ network cables Po E Powered No external power required—saves installation time & cost Mounting Wall mounting points for remote installations LED indicator LED indicator confirms power Housing Rugged metal enclosure Features Extends 100 meters for a total distance of up to 200 meters (656 ft.) Daisy chain up to 7 units for a total Po E+ network extension of 800 m (2, 600 ft.) * Plug & play installation No external power required Wall mountable Rugged metal housing ...