A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in hard wood, exotic rip, plywood rip, crosscut, softwood rip & chipboard laminated one-sided. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened & tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability & a guarantee of quality. High grade alloy steel palate body precision ground to maintain flatness. D=10 inches. D=255 mm Bore=30 mm. Kerf=2.4 mm. Plate thick=1.8 mm. No. of Teeth=72. Tooth form=ATB. ...

A precision hand made double sided credit card size diamond stone. Fine 600 grit (25 micron) Coarse 340 grit (40 micron) Complete with black storage wallet. Guaranteed for five years, designed & manufactured in the UK. Ideal for fluted, shaped & small router bits. Carbide or HSS, turning tools, chisels, plane blades, carving tools & all general tooling.

Size: 86mm x 54mm x 0. 8mm Grade= Fine & Course.

...

Designed solely for use in the engineering industry for use with diamond abrasives & used for more than 30 years. WD 40 or other such lubricants are too thick & result it your tool skating over the diamond surface. Suitable for use with all quality diamond abrasive products. Use instead of water to reduce the threat of rusting by 95%. Reduces possibility of clogging & improves diamond performance. Hazard type. Sensitising (Xn) and Irritant (Xi).
Size: 100 ml. Hazard type. Sensitising (Xn) & Irritant (Xi).
...

A precision hand made double sided 5 inch x 1 inch pocket size diamond stone. Complete with fabric holder & cleaning block. Fine 600 grit (25 micron) Coarse 340 grit (40 micron) Guaranteed for five years, designed & manufactured in the UK. Ideal for interim circular saw blade sharpening, router bits
- Carbide & HSS, turning tools, chisels, carving tools & all general tooling.

Size: 127 mm. x 27 mm. x 1.5 mm. Grade= Fine/ Coarse.


...

Designed to enable virtually any router to cut ellipses & circles. Used for corner tables arches desks & mirrors. Setting-up & operating is simple & effective. A connector plate on the end of the bar fits directly onto the fence rods of Trend routers. For the fixing of other makes of routers an accessory adaptor base plate is required. By using one slide the jig can be adapted for cutting circles. With additional extension bars larger ellipses & circles can be cut. Specifications: Ellipse major axis: 1800 mm. Ellipse minor axis max: 1650 mm. Ellipse minor axis min: 1400 mm. Ellipse major axis: 1500 mm. Ellipse minor axis max: 1350 mm. Ellipse minor axis min: 1100 mm. Ellipse major axis: 1200 mm. Ellipse minor axis max: 1050 mm. Ellipse minor axis min: 800 mm. Ellipse major axis: 900 mm. Ellipse minor axis max: 760 mm. Ellipse minor axis min: 550 mm. Ellipse major axis: 800 mm. Ellipse minor axis max: 650 mm. Ellipse minor axis min: 550 mm. Ellipse major axis: 700 mm. Ellipse minor axis max: 580 mm. Ellipse minor axis min: 580 mm. Circle dia. min: 580 mm. Circle dia. max: 1800 mm.
Includes:: 1 x cross frame 2 x sliders 2 x 500 mm. bars & 1 x connector plate.
...

Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. GB12 = 12 mm., Outside Diameter of Bush. ...

Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter=14mm Inner diameter=11mm Projects from plate=6mm ...

Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter=16 mm Inner diameter=13 mm Projects from plate=6 mm ...

Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. GB18 = 18 mm., Outside Diameter of Bush. ...

Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter=22mm Inner diameter=19mm Projects from plate=6mm ...