Designed for PC builders who want a sleek, custom looking case with great airflow & a crystal clear tempered glass panel – the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air & liquid cooling hardware, high-end GPUs & even a handy PSU cover in the basement. Tempered Glass Window The left tempered glass window is designed to slide into place & can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable & shows much less wear & tear than older acrylic panels. Angular, Acrylic Front Panel The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components. Sync with Motherboard RGB Software Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, & BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software. Visit the support page for motherboard information or to download the software: One Button to Easily Access Gorgeous RGB LED Illumination If you aren’t using a compatible RGB motherboard, the included RGB fans can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes & a range of different colour options. Built-in RGB Switch Board Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED & BIOSTAR Vivid LED DJ -enabled motherboards. Handy I/O Ports The top-front panel features two USB (Universal Serial Bus) 3.0 data transfer ports to grant easy access when needed. Built-in PSU Cover The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view & give your build a clean & tidy look. Tool-Free Installation The included hard drive bays suit 3.5” & 2.5” bays, the chassis comes with expansion slots above & below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives. 3.5” or 2.5” HDD Drive Compatible Superior Hardware Support Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, & a power supply with length of up to 160mm. Excellent Cooling Capability The J25 comes with three 12V RGB fans in the front & one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator. ...

The new Versa N21 window mid-tower chassis features a sleek mirror-pane design & supports up to a standard ATX motherboard & CPU cooler installation. The Versa N21 is ideal for space-conscious gamers who design with high-end hardware & expansion in mind. in addition, the Versa N21 combines a manageable frame size with extensive options to personalize a computer or gaming system. Key Features Gaming-Oriented Concept - Designed for gamer, the glossy black front/top panels deliver stylish images. The heightened foot-stands at the bottom help enhance airflow, & a triangular transparent side window offers a direct view of the inner system. Tool-free Design - The innovative 5.25 & 3.5 tool-free drive bay design minimized the hassles of installation/removal. The trio drive bay concept of 1 + 4 + 1 offers a good ratio for accessories & storage devices. Hidden I/O Ports - The top-front panel features one USB (Universal Serial Bus) 3.0 data transfer port along with two standard USB (Universal Serial Bus) 2.0 ports as well as HD microphone & headset jacks to grant direct access when needed. Optimized Ventilation - A preinstalled 120mm rear exhaust fan & two optional 120mm intake fans with an integrated dust filter optimize system ventilation. Pre-mounted holes support motherboards up to standard ATX. CPU cooler installations with up to 160mm radiator at the top & 250mm long graphic cards are supported. Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling: Water Cooling Ready! Body

Material: SPCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 1 x 5.25” External 1 x 3.5” External Internal Bays: 3 x 3.5” Internal 1 x 2.5” Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 2 x 120mm Cooling Top: 2 x 120mm Cooling Rear: 1 x 120mm Cooling Side: Cooling Bottom: IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No









...

The new Versa N21 Snow window mid-tower chassis features a sleek mirror-pane design & supports up to a standard ATX motherboard & CPU cooler installation. The Versa N21 Snow is an ideal choice for space-conscious gamers who design with high-end hardware & expansion in mind. in addition, the Versa N21 Snow combines a manageable frame size with extensive options to personalise a computer or gaming system. Key Features Gaming-Oriented Concept - Designed for a gamer, the glossy white front/top panels delivers stylish images. The heightened foot-stands at the bottom help enhance airflow & a triangular transparent side window offers a direct view of the inner system. Tool-free Design - The innovative 5.25” & 3.5” tool-free drive bay design minimises the hassles of installation/removal. The trio drive bay concept of “1 + 4 + 2” offers a good ratio for accessories & storage devices. Hidden I/O Ports - The top-front panel features one USB (Universal Serial Bus) 3.0 data transfer port along with two standard USB (Universal Serial Bus) 2.0 ports as well as a HD microphone & headset jacks to grant direct access when needed. Optimised Ventilation - A pre-installed 120mm rear exhaust fan & two optional 120mm intake fans with an integrated dust filter optimises system ventilation. Pre-mounted holes support motherboards up to standard ATX. CPU cooler installations allow up to 240mm radiators at the top & a 400mm long graphic card are also supported. Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Body

Material: SPCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 1 x 5.25” External 1 x 3.5” External Internal Bays: 3 x 3.5” Internal 1 x 2.5” Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: Cooling Top: Cooling Rear: 120 x 120 x 25 mm fan (1000rpm, 16d BA) Cooling Side: Cooling Bottom: IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone GPU Max Length: 360mm CPU Cooler Maximum

Height: 160mm Front Bezel

Colour: White Body

Colour: Black System Cabinet

Features: PSU Included: No General Specifications Manufacturer Part Number: CA-1D9-00M6WN-00 EAN Number: 4717964403520 Has Mains Plug: No

Colour: White Whats In The Box: Case Manual Unit (Product)

Dimensions (mm): 217mm x 513mm x 463mm (W x H x D) Packaging

Dimensions (mm): 325mm x 580mm x 535mm (W x H x D) Net Weight (KGs): 4.6 KGs Gross Weight (KGs): 5 KGs

















...

The new mid tower chassis of Versa case line Versa N23, designed for gamers to gear with the latest gaming component, offering not only style & personality but an exceptional combination of cooling, performance, versatility & adaptability to any configuration to ensure true enjoyment while in or out of the game. Gaming-Oriented Concept Designed for gamer, the black metal meshed front panel delivers stylish images. The heightened foot-stands at the bottom help enhance airflow, & a transparent side window offers a direct view of the inner system. Innovative Tool-Less Design The innovative 5.25” & 3.5” tool-free drive bay design minimized the hassles of installation/removal. The dual drive bay concept of “2 + 4 + 2” offers a good ratio for accessories & storage devices. Hidden I/O Ports The top-front panel features one USB (Universal Serial Bus) 3.0 data transfer port along with two standard USB (Universal Serial Bus) 2.0 ports as well as HD microphone & headset jacks to grant direct access when needed. Supreme Ventilation Preinstalled with one 120mm rear fan; two 120mm front fan (optional) as well as two 120mm fans mounted on the top (optional) to optimize the system cooling performance for extreme airflow. In order to keep the interior dust free, all intake ventilation holes come with dust protection, including a removable dust filter at the bottom of the chassis. Users can simply build up a complete high-end water cooling solution with 240mm radiator & long graphic card up to 360mm (without HDD cage). ...

The new Versa N26 window mid-tower chassis features a sleek design & supports Mini, Micro & standard ATX motherboards & CPU cooler installation. The Versa N26 is ideal for space-conscious gamers who design with high-end hardware & expansion in mind. in addition the Versa N26 combines a manageable frame size with extensive options to personalise a computer or gaming system. Key Features Gaming-Oriented Concept - Designed for gamers, the black sleek front & top panels deliver stylish images. The heightened foot-stands at the bottom help enhance airflow & a transparent side window offers a direct view of the inner system. Tool-Free Design - The innovative 5.25” & 3.5” tool-free drive bay design minimises the hassles of installation & removal. The trio drive bay concept of “1 + 4 + 1” offers a good ratio for accessories & storage devices. Handy I/O Ports - The top-front panel features one USB (Universal Serial Bus) 3.0 data transfer port along with two standard USB (Universal Serial Bus) 2.0 ports as well as HD microphone & headset jacks to grant direct access when needed. Optimised Ventilation - A pre-installed 120mm rear exhaust fan & two optional 120mm intake fans with an integrated dust filter optimises the systems ventilation. Pre-mounted holes support motherboards up to standard ATX & CPU cooler installations with up to 160mm & 250mm long graphic cards are supported. Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Body

Material: SPCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 1 x 5.25” External Internal Bays: 4 x 3.5” Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: Cooling Top: Cooling Rear: Rear (Exhaust): 120 x 120 x 25 mm fan (1000rpm, 16d BA) Cooling Side: Cooling Bottom: IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone GPU Max Length: 360mm CPU Cooler Maximum

Height: 160mm Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No General Specifications Manufacturer Part Number: CA-1G3-00M1WN-00 EAN Number: 4717964404558 Has Mains Plug: No

Colour: Black Whats In The Box: Case Manual Unit (Product)

Dimensions (mm): 217mm x 513mm x 463mm (W x H x D) Packaging

Dimensions (mm): 235mm x 580mm x 535mm (W x H x D) Net Weight (KGs): 4.6 KGs Gross Weight (KGs): 5 KGs

















...

Versa U21 Thermaltake Versa U21 Window Mid-tower Chassis With slick lines in a streamlined style, the Thermaltake Versa U21 mid-tower chassis supports up to a standard ATX motherboard & CPU cooler installation. in addition, the Versa U21 combines a manageable frame size with extensive options to personalise a computer or gaming system. Thermaltake Versa U21 is designed for those who are looking for a chassis with an outstanding thermal performance as well as with a simple appearance. Key Features Tt LCS Certified - Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which the chassiss have been tested to be the best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Exquisite Design - Built with a brushed metal finish front door panel to mask the extrusive drive devices, not only to unify the appearance, but also provide a simple yet sophisticate aesthetic. The power cover design is another unique feature of the Versa U21. The entire bottom area can be used to reorganise unused cables, which makes for a tidy-looking system. Tool-free Design - The innovative 5.25 & 3.5 tool-free drive bay design minimises the hassles of installation/removal. The trio drive bay concept of 2 + 3 + 2 offers a good ratio for accessories & storage devices. Handy I/O Ports - The front-top panel is designed with two USB (Universal Serial Bus) 3.0 data transfer ports along with two standard USB (Universal Serial Bus) 2.0 ports, a HD microphone & headset jacks, to grant direct access when needed. Optimised Ventilation - Pre-installed two 120mm turbo fans at the front & rear panel optimise system ventilation in the Versa U21. To keep the interior dust free, all intake ventilation holes are specially designed with removable dust filters. in addition, pre-mounted holes support motherboards up to standard ATX. The Versa U21 allows users to install a tower CPU cooler with height up to 155mm & a dual expansion slot VGA of up to 415mm in length without a front fan. Moreover, at the top of the Versa U21, it supports a radiator size up to 240mm. Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Body

Material: SPCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 2 x 5.25” External Internal Bays: 3 x 3.5” Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 2 x 120mm, 2 x 140mm Cooling Top: 2 x 120mm Cooling Rear: 1 x 120mm Cooling Side: Cooling Bottom: 1 x 120mm IO Ports: 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x Audio 1 x Microphone SD/TF Card Reader Included (Built-in) GPU Max Length: 415mm CPU Cooler Maximum

Height: 155mm Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No











...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

Thermaltake View 23 Tempered Glass ARGB Edition Mid Tower Chassis The View 23 Tempered Glass ARGB Edition mid-tower chassis synchronized with motherboard features streamlined front panel structure, one durable 4mm thick left tempered glass window, three 120mm 5V addressable ARGB LED front fans, one 120mm standard rear fan & a built-in power supply cover for clean cable management. The front ARGB fans are addressable to deliver 16.8 million-colour RGB illumination & unparalleled ventilation. This model comes ready to sync with RGB capable motherboards from Asus, Gigabyte, MSI & As Rock. It also supports the latest PC hardware, including the most advanced graphic cards, & air/liquid cooling solutions. Build your ultimate dream rig with Thermaltake View 23 TG ARGB Edition! 3 Built-in 120mm 5V ARGB LED Fans The View 23 TG ARGB edition comes with three 120mm 5V ARGB LED front fans featuring 9 addressable LEDs, hydraulic bearings, & 16.8 million-colour illumination to guarantee high airflow & some awesome lighting modes. The 5V ARGB LED fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes & a range of different colour options or through your motherboard software. Sync with Motherboard RGB Software Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync & As Rock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI & As Rock official websites. Built-in 5V RGB Switch Board Thanks to the built-in 5V RGB switch board, View 23 TG ARGB is able to deliver the addressable RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync & ASRock Polychrome motherboards. Built-in PSU Cover The View 23 TG ARGB is equipped with a full-length PSU cover to hide those unsightly cables from view & give your build a sleek & tidy look, & what’s more, a better airflow. Dust Reduction Super fine top filter, side panel filter & bottom filter come with excellent protection & reduction against dirt & dust. 4 mm Thick Left Tempered Glass Window Design The 4 mm thick left tempered glass panel guarantees the durability of the window & display your build with crisp clarity. Tool-Free Installation The View 23 TG ARGB comes with tool-free drive cages to provide the ease of installation/removal & maximize the interior space for highly customizable layouts. Users get to mount up to two 2.5” HDD inside the left side panel or on the PSU cover. There are also dual removable, interchangeable HDD drive bays held in the PSU cover which allow for position adjustment according to the PSU length. Supports High-End PCs with Outstanding Expandability The View 23 TG ARGB guarantees outstanding expandability, supporting a tower CPU cooler with maximum height 170mm, a dual expansion slot VGA of up to 366mm in length without radiator on the right side, & a power supply with length of up to 170mm; plus, it has the ability to accommodate multiple 3.5”/2.5” storage devices at the same time. Superior Cooling Capability The View 23 TG ARGB is optimized for superior cooling capability with three 120mm 5V addressable ARGB LED front fans & one 120mm standard rear fan. The case can house up to one 140mm intake fan & one 360mm radiator, allowing users to build a complete high-end system. Streamlined Front Panel Structure Front panel adopts streamlined curve design to give the chassis a sleek & dynamic look. ...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...