Thermaltake P1000 Pastel Coolant: Red " Formulated to Impress" Thermaltake P1000 Pastel Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid & heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock & made filling up your system easy! The new formula also provides P1000 Pastel Series with colour saturation & stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress & simplify the process of setting up your water loop! Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Features Better Formula, for a Better System • Anti-Corrosive Solution: Corrosion protection for copper, brass, nickel, & aluminium. • Antifreeze: Ensures coolant to run effectively under extreme weathers. • Liquid Surface Tension Optimizer: By adding optimizer to increase the surface tension of the coolant, it minimizes the risk of airlock to accelerate the process of starting the system. Filling Coolant Made Easy! Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop. Flow Like Pure Water Due to the special formulated process of P1000 Pastel Coolant Series, it assembles a lot of qualities of pure water. Quality such as low viscosity enables effective flow of P1000 Pastel Coolant. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. At 20°C, P1000 Pastel Coolant has 26.4% lower viscosity than other coolant & 25.8% lower at 40°C. • Coolant Viscosity at 20°C (m Pa&
- ;s): P1000 Pastel Coolant 40% > 1.42m Pa&
- ;s • Coolant Viscosity at 40°C (m Pa&
- ;s): P1000 Pastel Coolant 30% > 0.89m Pa&
- ;s Anti-Corrosive Solution Being non-flammable, P1000 Pastel Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, & aluminium – from corrosion. • Boiling Point: 329°F (165°C) • Freezing Point: -4°F (-20°C) • Propylene Glycol < 6% • Water < 94% Vivid Colours P1000 Pastel Coolant comes in five non-transparent colours; red, blue, white, green & yellow. The latest TT formula ensures colour saturation, stability & duration. Eco-Friendly P1000 Pastel Coolant Series is GREEN! Made with biodegradable materials, P1000 does not pollute the environment or bio accumulates. Thermaltake produced the P1000 Pastel Coolant Series with the environment in mind.



...

Thermaltake P1000 Pastel Coolant: Blue " Formulated to Impress" Thermaltake P1000 Pastel Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid & heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock & made filling up your system easy! The new formula also provides P1000 Pastel Series with colour saturation & stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress & simplify the process of setting up your water loop! Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Features Better Formula, for a Better System Anti-Corrosive Solution: Corrosion protection for copper, brass, nickel, & aluminium. Antifreeze: Ensures coolant to run effectively under extreme weathers. Liquid Surface Tension Optimizer: By adding optimizer to increase the surface tension of the coolant, it minimizes the risk of airlock to accelerate the process of starting the system. Filling Coolant Made Easy! Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop. Flow Like Pure Water Due to the special formulated process of P1000 Pastel Coolant Series, it assembles a lot of qualities of pure water. Quality such as low viscosity enables effective flow of P1000 Pastel Coolant. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. At 20°C, P1000 Pastel Coolant has 26.4% lower viscosity than other coolant & 25.8% lower at 40°C. Coolant Viscosity at 20°C (m Pa&
- ;s): P1000 Pastel Coolant 40% > 1.42m Pa&
- ;s Coolant Viscosity at 40°C (m Pa&
- ;s): P1000 Pastel Coolant 30% > 0.89m Pa&
- ;s Anti-Corrosive Solution Being non-flammable, P1000 Pastel Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, & aluminium – from corrosion. Boiling Point: 329°F (165°C) Freezing Point: -4°F (-20°C) Propylene Glycol < 6% Water < 94% Vivid Colours P1000 Pastel Coolant comes in five non-transparent colours; red, blue, white, green & yellow. The latest TT formula ensures colour saturation, stability & duration. Eco-Friendly P1000 Pastel Coolant Series is GREEN! Made with biodegradable materials, P1000 does not pollute the environment or bio accumulates. Thermaltake produced the P1000 Pastel Coolant Series with the environment in mind.



...

Thermaltake P1000 Pastel Coolant: Green " Formulated to Impress" Thermaltake P1000 Pastel Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid & heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock & made filling up your system easy! The new formula also provides P1000 Pastel Series with colour saturation & stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress & simplify the process of setting up your water loop! Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Features Better Formula, for a Better System • Anti-Corrosive Solution: Corrosion protection for copper, brass, nickel, & aluminium. • Antifreeze: Ensures coolant to run effectively under extreme weathers. • Liquid Surface Tension Optimizer: By adding optimizer to increase the surface tension of the coolant, it minimizes the risk of airlock to accelerate the process of starting the system. Filling Coolant Made Easy! Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop. Flow Like Pure Water Due to the special formulated process of P1000 Pastel Coolant Series, it assembles a lot of qualities of pure water. Quality such as low viscosity enables effective flow of P1000 Pastel Coolant. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. At 20°C, P1000 Pastel Coolant has 26.4% lower viscosity than other coolant & 25.8% lower at 40°C. • Coolant Viscosity at 20°C (m Pa&
- ;s): P1000 Pastel Coolant 40% > 1.42m Pa&
- ;s • Coolant Viscosity at 40°C (m Pa&
- ;s): P1000 Pastel Coolant 30% > 0.89m Pa&
- ;s Anti-Corrosive Solution Being non-flammable, P1000 Pastel Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, & aluminium – from corrosion. • Boiling Point: 329°F (165°C) • Freezing Point: -4°F (-20°C) • Propylene Glycol < 6% • Water < 94% Vivid Colours P1000 Pastel Coolant comes in five non-transparent colours; red, blue, white, green & yellow. The latest TT formula ensures colour saturation, stability & duration. Eco-Friendly P1000 Pastel Coolant Series is GREEN! Made with biodegradable materials, P1000 does not pollute the environment or bio accumulates. Thermaltake produced the P1000 Pastel Coolant Series with the environment in mind.



...

Thermaltake P1000 Pastel Coolant: White " Formulated to Impress" Thermaltake P1000 Pastel Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid & heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock & made filling up your system easy! The new formula also provides P1000 Pastel Series with colour saturation & stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress & simplify the process of setting up your water loop! Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Features Better Formula, for a Better System • Anti-Corrosive Solution: Corrosion protection for copper, brass, nickel, & aluminium. • Antifreeze: Ensures coolant to run effectively under extreme weathers. • Liquid Surface Tension Optimizer: By adding optimizer to increase the surface tension of the coolant, it minimizes the risk of airlock to accelerate the process of starting the system. Filling Coolant Made Easy! Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop. Flow Like Pure Water Due to the special formulated process of P1000 Pastel Coolant Series, it assembles a lot of qualities of pure water. Quality such as low viscosity enables effective flow of P1000 Pastel Coolant. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. At 20°C, P1000 Pastel Coolant has 26.4% lower viscosity than other coolant & 25.8% lower at 40°C. • Coolant Viscosity at 20°C (m Pa&
- ;s): P1000 Pastel Coolant 40% > 1.42m Pa&
- ;s • Coolant Viscosity at 40°C (m Pa&
- ;s): P1000 Pastel Coolant 30% > 0.89m Pa&
- ;s Anti-Corrosive Solution Being non-flammable, P1000 Pastel Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, & aluminium – from corrosion. • Boiling Point: 329°F (165°C) • Freezing Point: -4°F (-20°C) • Propylene Glycol < 6% • Water < 94% Vivid Colours P1000 Pastel Coolant comes in five non-transparent colours; red, blue, white, green & yellow. The latest TT formula ensures colour saturation, stability & duration. Eco-Friendly P1000 Pastel Coolant Series is GREEN! Made with biodegradable materials, P1000 does not pollute the environment or bio accumulates. Thermaltake produced the P1000 Pastel Coolant Series with the environment in mind.



...

Thermaltake P1000 Pastel Coolant: Yellow " Formulated to Impress" Thermaltake P1000 Pastel Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid & heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, P1000 Pastel Coolant Series has minimized the risk of airlock & made filling up your system easy! The new formula also provides P1000 Pastel Series with colour saturation & stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress & simplify the process of setting up your water loop! Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Features Better Formula, for a Better System • Anti-Corrosive Solution: Corrosion protection for copper, brass, nickel, & aluminium. • Antifreeze: Ensures coolant to run effectively under extreme weathers. • Liquid Surface Tension Optimizer: By adding optimizer to increase the surface tension of the coolant, it minimizes the risk of airlock to accelerate the process of starting the system. Filling Coolant Made Easy! Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop. Flow Like Pure Water Due to the special formulated process of P1000 Pastel Coolant Series, it assembles a lot of qualities of pure water. Quality such as low viscosity enables effective flow of P1000 Pastel Coolant. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. At 20°C, P1000 Pastel Coolant has 26.4% lower viscosity than other coolant & 25.8% lower at 40°C. • Coolant Viscosity at 20°C (m Pa&
- ;s): P1000 Pastel Coolant 40% > 1.42m Pa&
- ;s • Coolant Viscosity at 40°C (m Pa&
- ;s): P1000 Pastel Coolant 30% > 0.89m Pa&
- ;s Anti-Corrosive Solution Being non-flammable, P1000 Pastel Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, & aluminium – from corrosion. • Boiling Point: 329°F (165°C) • Freezing Point: -4°F (-20°C) • Propylene Glycol < 6% • Water < 94% Vivid Colours P1000 Pastel Coolant comes in five non-transparent colours; red, blue, white, green & yellow. The latest TT formula ensures colour saturation, stability & duration. Eco-Friendly P1000 Pastel Coolant Series is GREEN! Made with biodegradable materials, P1000 does not pollute the environment or bio accumulates. Thermaltake produced the P1000 Pastel Coolant Series with the environment in mind.



...

Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit Thermaltake Pacific C240 DDC Hard Tube Water Cooling Kit is designed for users who likes an efficient & high-quality combo kit that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI & ASRock. The kit

Includes:: two Pure 12 ARGB Sync Radiator Fans, a Pacific W4 ARGB CPU Water Block, Pacific PR15-DDC Pump/ Reservoir Combo, Pacific C240 Radiator, A bottle of T1000 Transparent Coolant Pure Clear, six C-Pro G14 PETG 16mm OD Compressions, eight V-Tubler PETG Tubes, an ARGB LED controller, & other accessories. Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis’ have been tested to be compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Pacific W4 ARGB CPU Water Block Comes with a 16.8 million colors LED ring & 12 addressable single LEDs that can be controlled by the included ARGB controller & ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI & ASRock. W4 ARGB CPU Water Block features 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating & high-quality PMMA cover, & a universal mounting mechanism that offers error-free as well as no-tools installation. Fits with most G1/4 fittings, it provides the ultimate in cooling performance, & delivers extreme compatibility for custom PC builders. Pure 12 RGB Sync Radiator Fan Thermaltake Pure 12 ARGB Sync Radiator Fan TT Premium Edition features compression blades, hydraulic bearing, & a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI & As Rock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync & As Rock Polychrome software. Two Pure ARGB Sync Edition Fans & one ARGB controller are included in the pack. Thermaltake Pacific C240 Radiator High-performance 240mm slim copper radiator with high-density copper fin design & brass tank. Built for 120mm high-static pressure fans, the radiator is manufactured from premium-quality materials that provide exceptional performance, unrivalled reliability. The unique stainless steel side panels guarantee the durability as well as reduce the weight of the radiator. Integrated G1/4" threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting & flow set-up. Pacific PR15-DDC Pump/ Reservoir Combo Manufactured from POM & PMMA, the unit

Includes:: a 200ml long reservoir with an integrated DDC pump, offering exceptional performance & unrivalled reliability for all gaming systems. T1000 Transparent Coolant
- Pure Clear Thermaltake T1000 Transparent Coolant Series is designed with TT latest formula to be used as anti-corrosion protection fluid & heat-transfer medium for PC water-cooling. With transparent colors, T1000 allows users to create unique colors by adding TT Premium concentrate. The new formula provides T1000 Transparent Coolant Series with color stability & low viscosity that enables effective flow. Thermaltake T1000 Transparent Coolant Series encourages users to create your own colors for your system! Pacific C-Pro G1/4 PETG Tube 16mm OD Compression Fitting
- Black Featuring chrome plating, the compression fitting comes with special four rubber O-rings leak-free design & patented structure for ultimate loop management. six compression fittings are included in the kit. Pacific G1/4 90 Degree Adapter
- Black Finished in chrome-plated copper, the adapter fitting is in 360° revolve-able design, & consists of two sealed O-rings, allowing users to redirect the fittings at a 90 degree angle for easier tube routing. 2 adapter fittings are included in the kit. V-Tubler PETG Tube 5/8" (16mm) OD 500mm (8 Pack) Manufactured from premium PETG, the rigid tubing provides custom PC water cooling configurations with reliability & durability from end to end.






...

Thermaltake Pacific CLM240 Radiator The Pacific CLM240 Radiator is a high-performance 240mm copper radiator with high-density copper fin design & brass tank. Built for 120mm high-static pressure fans with 40mm thickness for optimal heat dissipation, the radiator is manufactured from premium-quality materials that provide exceptional performance, unrivalled reliability. The unique stainless steel side panels guarantee the durability as well as reduce the weight of the radiator. Integrated G1/4" threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting & flow set-up, the Pacific CLM Radiator Series meets your cooling needs in every way. Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Optimized Heat Dispatching The radiator is optimized for efficiently pulling heat away from the power-dissipating components thus achieving maximum heat dissipation at both low & high airflow operation. After soldering, the fin & tube connect to form a joint, thereby creating uniform heat transfer. Dual-Row Copper Tubes with Brass Tank To assure the best thermal capacity & increase heat transfer, the Pacific CLM Series is engineered with a thick 40mm radiator along with a dual-row 12-set flat tube design & brass tank. This technique allows that water flows down on the one side, & then passes across the bottom chamber before circulating back to the other side of the radiator. High-Density Copper Fin Design Fin density is optimally designed to accommodate high air volume (FPI: 14). The performance improves significantly with increased fan speed, offering superior cooling efficiency during operation. Stainless Steel Side Panels Unlike most of copper radiators on the market, the radiator utilizes stainless steel made side panels that increase the durability & strength of the radiator while reducing the weight. High-Quality Manufacturing Process: Reflow Soldering An exceptional manufacturing process using high temperature soldering at 482F/250C sets the radiator in a class of its own. This technique allows for impurities to be kept out of the soldering process, ensuring that full strength on all the connected areas is achieved. The radiator is baked through a controlled atmosphere soldering line. The materials melt into each other to accomplish optimal thermal transfer from the tubes to the actual fins in order to attain better heat evacuation. Remarkable Expansion Designed for 120mm high-static pressure fans, the Pacific CLM Series allow users to build up aesthetically-superior watercooled PCs as well as incorporate externally-modular upgrades for the systems, delivering the ultimate in custom configurations. Features• Fitment: - Engineered with a 40mm thickness radiator along with a Dual-Row 12-set flat tube design & brass tank for best thermal capacity. • High Density Copper Fins: - Designed to accommodate high air volume (Fin per Inch: 17). • Reflow Soldering: - High-quality & high-temperature soldering at 482F/250C ensures optimal thermal transfer with full strength on all connected area avoiding cracking & fail over time. • Optimized Heat Dispatching: - Optimized for efficiently pulling heat away from the power-dissipating components thus achieving maximum heat dissipation at both low & high airflow operation. • Stainless Steel Side Panels: - Engineered with stainless steel made side panels that increase durability & strength of the radiator & reduce the weight. ...

The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast & custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4” durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design & hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features & fitment. High-Flow & Leak-Free Design Made in Taiwan, the fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing. The fittings are available in chrome & black finishes, include six preinstalled O-ring. Use PETG tube for all your water cooling needs. For tubes:
- Outer diameter: 5/8” (16 mm) Remarkable Expansion Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.
...

Thermaltake Pacific Lumi Plus LED Strip 3 Pack is a software-controlled lighting solution for PC chassis with three 16.8 million colors LED strips & a digital lighting controller. Manufactured with finest top quality materials, the pack features magnetic LED strips for easy installation & chainable connector for unlimited connection possibilities. Supporting Thermaltake’s patented TT RGB PLUS Software & AI interactive voice control, the Pacific Lumi Plus LED Strip 3 Pack lights up & brings colors to your PC like never before. TT Premium To continue achieving the corporate mission of delivering the perfect user experience, Thermaltake developed “TT Premium” with the essence of combining supreme quality products with a new logo design. TT Premium is far more than just a guarantee of quality. Behind the name, it represents the passion in DIY, Modding & Thermaltake’s desire to be the most innovative brand in the PC hardware market. To satisfy the demand of the high-end PC users, TT Premium follows its core values of Excellent Quality, Unique Design, Diverse Combinations & Boundless Creativity to provide a high performance PC product for every enthusias TT RGB PLUS TT RGB PLUS Ecosystem is the intelligent lighting system for PCs that combines the most advanced addressable LED lighting with Thermaltake’s patented TT RGB PLUS Software. TT RGB PLUS ecosystem provides nearly unlimited possibilities for playing with colors, synchronizing lights to games, music, CPU temperatures or other TT RGB PLUS products, including case fans, CPU/VGA waterblocks, AIO CPU coolers, PSUs, LED strips & peripherals. The patented software allows users to change the light modes, colors, speeds, brightness, fan speeds, & even supports AI voice control in i OS & Android devices. Patented TT RGB PLUS Software & App Monitor the fan performance, adjust the fan speeds, & customize the lighting effects for Thermaltake RGB PLUS series products with the patented TT RGB PLUS Software & an exclusively designed mobile app. Choose a function from below & scroll down to read the details. Thermaltake AI Voice Control Talking to TT RGB PLUS App is an easier, faster way to set lights for your systems. You can ask it to turn the lights on or off, switch lights modes, dim the lights, change light colors, or adjust lights speeds or fan speeds. Choose a video from below to see how it works. Exclusive LED Strip Design Controlled by the patented TT RGB PLUS Software & the app, the LED strip features great light coverage, uniform color & brightness, & 12 addressable LEDs that can paint your build with 16.8 million colors. Digital Lighting Controller The controller supports up to 10 Pacific Lumi Plus LED Strips. Each port on the controller can connect up to 3 channels of the LED strips. The controller is also designed with a DIP switch on the back, offering you an easy way to set a number for each controller. You can add maximum 16 controllers to the software. The controller & the coding guide are included in all packs. Magnetic LED Strip Six powerful high-grade neodymium magnets are embedded in the LED strip for flexiblie & easy installation. The strip can be easily attached to & removed from any metal surface. The strip also comes with finest top quality 3MTM adhesive back stickers for non-metal surfaces. Premium Quality with Long Lifetime High quality components & materirals guarantee the durability of the LED strip & prolong the lifespan of the LEDs. The strip is water-resistant & insulation. The estimated working life of the LEDs is 50, 000 hours. Unlimited Connection Possibilities Pacific Lumi Plus LED Strip 3 Pack offers you versatile routing options with chainable connector, allowing users to add multiple LED strips to build up aesthetically superior systems. Each port on the integrated controller can connect up to 3 channels of the LED strips. The controller can support maximium 10 LED strips each time. Three LED strips & a digital lighting controller are included in the pack. ...

Thermaltake Pacific M240 D5 Hard Tube Water Cooling Kit The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all watercooled gaming systems. Inside you will find a W3 CPU waterblock, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Riing 12 RGB fans, 6 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes & other accessories. Tt LCS Certified Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis’ have been tested to be compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Pacific W3 CPU Water Block High-quality CPU water block supports all modern CPU sockets with a universal mounting mechanism that provides error-free, tool-less installation. The specially machined copper base with a mirror finish prevents corrosion & guarantees superior thermal performance. Pacific PR15-D5 Reservoir/ Pump Combo Manufactured from POM & PMMA, the unit

Includes:: a 200ml reservoir with an integrated D5 pump, offering exceptional performance & unrivalled reliability for all gaming systems. Pacific R240 Radiator Optimized for maximum heat dissipation, the high perfomance 240mm slim radiator ultilizes high-density fin design, & German zinc alloy aluminum & aerospace-grade materials, bringing a new level of cooling performance & reliability to any watercooled gaming PCs. Riing 12 RGB High Static Pressure LED Radiator Fan (3 Fans Pack) Specially made for those seeking a 120mm PWM fan with superior airflow, silent operation & RGB lighting, the fan utilizes compression blades, hydraulic bearing & a patented 256 colors LED ring, lighting up your system without sacrificing performance. C1000 Pure Clear Coolant Made in Germany, the non-flammable clear coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, & aluminum – from corrosion. Pacific C-Pro G1/4 PETG Tube 16mm OD Compression Fitting
- Chrome Featuring chrome plating, the compression fitting comes with special four rubber O-rings leak-free design & patented structure for ultimate loop management. 6 compression fittings are included in the kit. Pacific G1/4 90 Degree Adapter
- Chrome Finished in chrome-plated copper, the adapter fitting is in 360 degree revolvable design, & consists of two sealed O-rings, allowing users to redirect the fittings at a 90 degree angle for easier tube routing. 2 adapter fittings are included in the kit. V-Tubler PETG Tube 5/8” (16mm) OD 500mm (4 Pack) Manufactured from premium PETG, the rigid tubing provides custom PC water cooling configurations with reliability & durability from end to end.



...