The Star Tech.com 36-inch Dual Drive IDE Cable is designed to fit as a new or replacement hard drive or CD-ROM cable in almost any size of computer case. Dual drive connectors allow a master & slave device to be connected. This cable supports hard disk drives, CD-ROMs, Tape Backups, Zip drives, DVD-ROM, or any ATA peripheral. ...

This 6ft DVI-I Dual Link DVI-I Extension Cable features a male DVI-I (dual link) connector & a female DVI-I (dual link) connector, allowing you to extend an existing digital or analog video connection by 6ft. Supporting hot-pluggable DVI display connections, the DVI-I extension cable provides an impressive 9.9 Gbps video bandwidth to deliver crystal clear images & video, suitable for virtually any application. Star Tech.com's 6ft DVI-I Dual Link Digital/ Analog Extension Cable is designed & constructed to provide maximum durability & video quality. ...

This DVI-D extension cable provides one DVI-D dual link Male connector & one DVI-D dual link Female connector to create a reliable way to extend your DVI-D (dual link) cable connection. With support for high speed digital video data transmissions up to 9.9 Gbps, the extension cable is suited for high resolution applications on your panel display, digital projector, or HDTV. This high performance DVI-D dual link extension cable is expertly designed & constructed of only finest top quality materials. ...

Boost your system performance by enhancing the capacity, speed & security of your data storage. This two-drive M.2 to SATA adapter lets you install two M.2 solid-state drives in a single 2.5” drive bay & configure a powerful RAID array. Build a RAID array to enhance system performance The dual M.2 to SATA adapter supports multiple RAID modes (RAID 0, 1, BIG) helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independent of one another. Maximize file transfer speeds The dual SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SSDs in place of a platter drive reduces your data transfer bottlenecks & gives you file transfer speeds of up to 6 Gbps. M.2 SSDs also save you money by reducing your power consumption over regular platter drives. The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability & performance of your M.2 NGFF SSDs. Get dependable drive protection The M.2 to SATA adapter features an enclosed housing that helps protect your NGFF (Next Generation Form Factor) SSD. The added protection gives you peace of mind when you are using your M.2 drives in applications that require an added level of durability such as hot-swap drive bays, or external SATA docking stations. ...

This Dual M.2 PCIe SSD Adapter adds two high performance PCIe M.2 SSDs (NVMe & AHCI) into the PCIe x 8 or x 16 slot of a desktop, workstation, or server. Boost System Performance Take full advantage of the fast performance & compact size of PCIe M.2 internal solid-state drives, with read & write speeds up to 7.8 G Bps per drive. Access two M.2 PCIe SSDs simultaneously No on-board chip leads to wide system compatibility. This card requires PCIe bifurcation, meaning it easily integrates into any system with an available x 8 or x 16 PCIe slot that supports PCIe bifurcation. Utilize software RAID, such as Storage Spaces (Microsoft) or mdraid/mdadm (Linux), to build a RAID array, adding redundancy or enhancing system performance. Wide Compatibility The PCIe M.2 NGFF (M Key or B+M Key) adapter supports PCIe NVMe & PCIe AHCI M.2 SSDs including 2242, 2260, 2280 & 22110mm drives. The PCIe M.2 Adapter Card does not require any software or drivers, meaning it works with most operating systems, if the computer/motherboard supports bifurcation. Vented Brackets The included full & low-profile vented brackets increase air flow to improve heat dissipation, which aids in maintaining optimal & reliable operating temperatures. The DUAL-M2-PCIE-CARD-B is backed for 2-years by Star Tech.com, including free 24/5 multi-lingual technical assistance Applications Connect two PCIe M.2 SSDs to your desktop computer or server to boost system speed & increase internal data storage Get ultra-fast data access, ideal for high-performance workstations ...

Overview Customize your workstation, & free up space, with this dual-monitor st&. Mount two monitors on the dual articulating monitor arms, & adjust your displays for optimum viewing with a wide range of motion. The free-standing base gives you flexibility in placing your setup within your workspace. Features Enhance Your Productivity Work more efficiently with a dual-monitor setup. The horizontal dual-monitor stand lets you mount two VESA mount (75x 75, 100x 100 mm) monitors, up to 32", with a maximum weight capacity of up to 17.6 lb./8kg per display. Create a More Ergonomic Workspace Mounting your displays on a dual-monitor stand above the desk surface enables you to adjust your display height, position & viewing angles for an ergonomic workspace. The swiveling arms provide maximum viewing flexibility, letting you work in comfort. Height-Adjustable Monitor Mount It’s easy to customize your setup, placing your monitors at the ideal height. Simply adjust the display height along the 16.7" (42.4 cm) pole. You can align your monitors perfectly with the micro-adjustment feature. Enjoy Optimum Viewing Extend the dual articulating arms up to 18.4" (46.8 cm) to position your monitors in the ideal position. Tilt your monitors +90/-40 degrees & swivel +90/-90 degrees for ideal viewing. Rotate your displays for portrait or landscape viewing. Keep Cables Out of View Neatly route your cables, keeping them organized & out of view, with the cable-management channels. ARMDUALSS is backed by a Star Tech.com 5-year warranty & free lifetime technical support. Applications Rotate displays to portrait orientation for web design & coding Position displays apart or back to back for multi-user workstations Ideal for health care centers, commercial & other busy environments ...

Increase your productivity & free up desk space with this dual-monitor st&. The free-standing mount lets you install two displays up to 24”, side by side, on a single base that you can place in virtually any workspace. The silver finish adds a designer touch to your office decor. Enhance Productivity with a Dual-Monitor Workstation Set up a dual-monitor workstation with this VESA monitor stand (75x 75, 100x 100 mm) to boost your productivity. Compare & edit files on two screens with ease. Rotate your monitors 360 degrees for portrait or landscape viewing. Free Up Desk Space with the Low-Profile Base Maximize the surface area on your desk with the twin monitor st&. Its crossbar design makes it easy to mount two flat-panel displays. The monitor stand features a low-profile flat back so you can position your displays against an office wall or cubicle wall to free up space. Optimum Viewing The crossbar design of the dual-monitor stand keeps your monitors perfectly aligned for comfortable viewing. You can customize the positioning of your displays with +/-15 degree tilt. You can also adjust the height of the monitors along the pole, up to 15.9" (40.5 cm). A Stable Platform with Versatile Use The robust steel & aluminum monitor stand provides a stable set-up for your workstation. The sturdy platform also allows flexible use as a temporary setup, for instance, to make presentations in the boardroom. ARMDUOSS is backed by a 5-year Star Tech.com warranty & free lifetime technical support. DUAL 24 INCH MONITOR MOUNT: VESA 75x 75/100x 100mm compatible heavy duty freestanding dual monitor desktop stand supports two displays up to 24" (18lb/8kg) per screen; Features a stylish silver finish HEIGHT ADJUSTABLE CROSSBAR DESIGN: Secure 2 monitors along the 25.2" horizontal crossbar w/ swivel & height adjustment (by hand w/ the lever) along the 15.9" (404mm) pole WIDE RANGE OF MOTION: Ergonomic monitor positioning w/ ball joint design for ideal viewing angles +/-15° tilt/swivel & 360° rotation (portrait/landscape); Align monitors w/ micro height adjustment STABLE & NON-SLIP: Aluminum free standing monitor mount w/ low profile base (10.9" (278mm) x 17.7" (450mm)) for max stability & flexible placement; Anti-slip rubber pads prevent scratches on surfaces ORGANIZED WORKSPACE: Double monitor universal VESA mount for computer/PC with cable management clips along the silver arms & center pole to organize cables for a tidy setup ...

This PCI Express to Express Card adapter adds an Express Card slot to a PCI Express capable computer. A cost-effective solution, the adapter lets you use your 34/54mm form factor Express Cards (Air Card, wireless broadband card, etc.) on a desktop PC
- eliminating the expense of having to buy a desktop specific add-on card (PCI based, etc.). Designed for use in standard & small form-factor computers, the PCIe to Express Card adapter

Includes:: both low-profile & standard-sized brackets.


...

This unique dual-bay adapter enclosure gives you an easy & cost-effective way to upgrade legacy systems such as desktop PCs & servers, by letting you install two 2.5" solid-state drives or hard drives into a single 3.5" drive bay. Upgrade your system performance The adapter enclosure lets you install newer, higher performing drives such as SSDs into legacy systems that may only support 3.5” hard drives. The enclosure provides a cost-efficient way for companies & organizations to enhance storage performance & reliability without expensive upgrades to core IT systems. Its also ideal for system administrators & integrators who want to build a system or upgrade a system with limited SATA interfaces to take advantage of the increased drive performance of 2.5” SSDs or increased capacity with support for two drives. The adapter enclosure means that you can install two 2.5" SATA drives into an internal or external 3.5-inch bay, such as a drive drawer caddy or tray, or 3.5" drive enclosure. To utilize the full speed potential of your SATA III hard drives, the drive converter supports SATA III for transfer speeds up to 6 Gbps. Suitable for drives with a height of up to 9.5 mm, virtually any 2.5" SATA drive can be made to look & function like a 3.5" drive. Enhanced performance & data redundancy with RAID The adapter enclosure is equipped with hardware RAID to provide enhanced performance & data redundancy. The enclosure supports both RAID 0 & RAID 1 as well as Spanning, & JBOD, & lets you choose your preferred backup mode by simply adjusting the RAID setting switch. The RAID 1 functionality is ideal in a hot-swapping server environment, providing a level of security & reliability to your data through data redundancy. With RAID 0 support, you can combine the storage capacity of the two hard drives & achieve faster read & write speeds. Easy & flexible installation You can install the adapter enclosure into a desktop PC or server. It offers flexible use in hot-swap bays or in a more fixed, permanent installation in a 3.5” hard-drive mounting bay with standard mounting holes. Once installed, you simply slide two 2.5” HDDs/SSDs into the adapter enclosure, with no tools required. The aluminum housing protects installed drives in a durable enclosure. The 35SAT225S3R is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Applications Upgrade legacy systems such as desktop PCs & servers Build or upgrade a desktop PC or server to take advantage of the increased performance of two 2.5" HDDs or SSDs in a 3.5" drive bay
- ideal for system integrators, IT professionals & prosumers Upgrade core IT systems cost-efficiently
...

Overview This deskmount dual-monitor arm lets you mount two 13” to 27” VESA mount monitors, each weighing up to 17.6 lb. (8 kg), onto a single low-profile base. It gives you flexible desk-clamp or grommet-hole mounting, letting you save space while creating an ergonomic workspace in any office environment. Free Up Desk Space­ With a stable dual-arm design, the double-monitor mount lets you create more usable work space by mounting your monitors side by side on a single base. The screen mount features a flat low-profile back that lets you position your displays against a wall or cubicle wall. Optimal Viewing The computer monitor desk mount features adjustable height along the pole. The smooth +/- 30° tilt motion & +/- 30° swivel make it easy to find the optimal viewing angle. You can also rotate your display 360° for portrait or landscape viewing, & make sure your displays are perfectly aligned using the micro-adjustment knob. Flexible Installation The dual-monitor arm is easy to install, with the desk-clamp or grommet mount (hardware included). Integrated cable management keeps your workspace organized. It works well with most desks, including sit-stand workstations. Boost Productivity with Multiple Monitors Adding two monitors gives you the extra screen space you need to simplify multitasking & maximize your productivity. ARMBARDUOG is backed by a 3-year Star Tech.com warranty & free lifetime technical support. Applications Mount two monitors on a single base to save desk space Maximize office space, creating a dual-monitor workstation against a wall or cubicle wall Works with sit-stand workstations, using the desk clamp or grommet mount Technical Specifications Warranty Information Warranty: 3 Years Hardware of Displays Supported: 2 Articulating: No Cable Management: Yes Mounting Options: Desk & Grommet Clamp VESA Hole Pattern (s): 75x 75 mm, 100x 100 mm Wallmountable: No Performance Display Rotation: 360° Dual-Arm Span: 32.87" (835 mm) Height Adjustment: Yes Maximum Display

Size: 27in Maximum

Height: 364 mm [14.3 in] Minimum Display

Size: 13" Pole

Height: 14.2" (360 mm) Swivel / Pivot: +30°/ -30° Tilt: + 30° /
- 30° Weight Capacity (Per Display): 8kg [17.7 lb] Mounting Surface Thickness: Desk Clamp: Table Thickness 0.39
- 3.14 in. (10
- 80 mm) Grommet Clamp: Table Thickness 0.39
- 3.14 in. (10
- 80 mm) Table Hole for Grommet Mount: 0.41
- 1.96 in. (10.5
- 50 mm) Physical Characteristics
Colour: Black Enclosure Type: Steel, Aluminum & Plastic Product

Height: 515 mm [20.3 in] Product Length: 870 mm [34.3 in] Product Weight: 4900.000 Product

Width: 135 mm [5.3 in] Packaging Information Package

Height: 120 mm [4.7 in] Package Length: 478 mm [18.8 in] Package

Width: 248 mm [9.8 in] Shipping (Package) Weight: 5.7kg [12.5 lb] Whats in the Box Included in Package 1
- Column 2
- VESA Adapters 2
- Cable-Management Clips (Column) 2
- Monitor Arms 2
- End Caps 2
- Cable-Management Clips (Monitor Arm) 2
- End-Cap Screws 1
- Desk-Mount Clamp 1
- Hex Key 1
- Hex Key Screwdriver 8
- M4x 14 Screws 8
- M5x 14 Screws 8
- Flat Washers 1
- Grommet-Mounting Adapter 1
- Grommet-Mount Plate 5
- Rubber Pads 1
- Instruction Manual








































...