The POEINJ2GI Industrial 2 Port Gigabit Po E+ Injector provides power & data connectivity to up to two Gigabit Po E-compliant devices over standard Ethernet cabling at distances of up to 330ft (100m). This dual port Po E injector means that you can easily connect two Po E-powered devices (PD) to a non-Po E LAN switch, avoiding the cost of upgrading your switch to a Po E-enabled model. Fully compliant with IEEE 802.3at / 802.3af, the high power Po E / PSE adapter provides two 10/100/1000 Mbps ports with support for up to 50V / 600m A (30 Watt max) output per port. To protect your devices from damage the injector offers intelligent detection, to verify whether the connected devices are IEEE 802.3at/af compliant. If the device is not compatible with Po E, only data will be sent through the LAN cable. Ideal for industrial environments, the power over Ethernet injector features a rugged, IP-30 case design that is both DIN rail & wall mountable, & features an extended operating temperature range (-40°C to 70°C) to ensure performance in harsh environments. Features 2 Po E+/ PSE (Power + Data), 10/100/1000 Mbps compliant ports Fully compliant with IEEE 802.3at / 802.3af Supports up to 50V / 600m A, 30 Watts max output per port Over Voltage Power Input & Over Current Output protection IP-30 rugged case design DIN-Rail & wall-mountable Uses existing / standard Cat 5 or better cabling

Specification Warranty 2 Years Color Black Hardware Industry Standards IEEE 802.3at Po E, IEEE 802.3af Po E Ports 2 Regulatory Approvals EN61000-4-3 (RS) EN61000-4-6 (CS) EN61000-4-8 EN61000-4-11 Shock: IEC60068-2-27 Free Fall: IEC60068-2-32 Vibration: IEC60068-2-6 Safety: EN60950-1 Performance Maximum Data Transfer Rate 1 Gbps Power Output 50V / 600m A, 30 Watts max. per port Surge Protection EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Connector (s) Connector Type (s) 1
- Terminal Block (4 Wire) Female 4
- RJ-45 Female



...

Star Tech.com Industrial 5 Port Gigabit Ethernet Switch 5 Po E RJ45 +2 SFP Slots 30W Po E+ 48VDC 10/100/1000 Mbps -40C to 75C w/DIN Connector
- Industrial 5 Port Gigabit Ethernet Switch
- Up to 30W per 4 Po E ports
- 75C to -40C hardened 5 RJ-45 ports (4 Po E) + 2 SFP slots MSA IP-30 housing MTBF 500k + hrs Vibration/shock/free fall rated Unmanaged DIN mountable/DIN connector included 2yr warr Easily deploy or scale your network with this Gigabit Ethernet switch, features four dedicated Po E+ enabled ports, & one dedicated open SFP slot plus the flexibility of a switchable RJ-45/ Open SFP port for use as an uplink or for non-Po E devices. It features an IP-30 housing, compact design, & is wall & DIN rail mountable. Power Over Ethernet & 48V Voltage With a total power budget of 120W, this PSE Ethernet switch provides up to 30W of power per Po E port to IEEE 802.3af (Po E / Type 1) & IEEE 802.3at (Po E+ / Type 2) powered devices (PD) like: Cameras Sensors Wi-Fi access points Uses Cat 5e (or higher rated) Ethernet cabling. Designed for Harsh Environments Industrial features include -40 C to 75 C operating temperature, IP-30 rated housing, vibration, shock, & free-fall standard testing. Vibration: EN 60068-2-6 Shock: EN 60068-2-27 Free-Fall: EN 60068-2-32 500, 000+ hours MTBF rating using Telcordia/ Bellcore at 50 C for long-term reliability. Dual Power Inputs Dual power inputs provide redundancy. Accepts terminal block power or DIN power connectors for additional power supply flexibility, allowing the product to be hardwired or powered using an external power supply (not included), which does not require professional installation. The IES1G52UPDIN is backed by a Star Tech.com 2-year warranty & free lifetime technical support. Features FIBER & Po E: Industrial 6 Port Gigabit Ethernet Switch IEEE 802.3af (Po E) or 802.3at (Po E+) 30W max per 4 x Po E ports PSE + 2 x open SFP slots Use with devices like cameras, sensors, wi-fi APs FLEXIBLE POWER INPUT: Use a DIN power connector or hardwire using terminal block power, or use dual power sources for redundancy Input voltage range is 48-56V DC ROBUST DESIGN: Industrial Network Switch w/MTBF 500, 000+hrs @ 50C Vibration, shock & free fall rated


...

Star Tech.com Industrial Fiber to Ethernet Media Converter
- 1 Gbps SFP to RJ45/CAT6
- SM/MM Fiber to Copper Gigabit Network

...

Star Tech.com Industrial Gigabit Po E Extender
- 60W 802.3bt Po E++ 100m/330ft
- Power Over Ethernet Network Range Extender
-


...

Star Tech.com Industrial RS232 to RS422/485 Serial Port Converter with 15KV ESD Protection Convert an RS232 data signal to either RS485 or RS422 with this wall-mountable, ESD-protected adapter Features RS232 to 2/4-wire RS485 or RS422 conversion Supports RS422 & RS485 auto detect & manual switching ±15KV ESD protection on all signal pins ...

The ICUSB1284INT Internal USB (Universal Serial Bus) Motherboard Header to Parallel Adapter lets you add a parallel port to any standard or low-profile/half-height desktop system that is equipped with an available USB (Universal Serial Bus) motherboard header, offering data transfer rates up to 1.5 Mbps. Unlike standard USB (Universal Serial Bus) to parallel cables, this cable is designed for use inside the PC case, affording an entirely internal solution with no mess or extra adapters needed. This compact & simple USB (Universal Serial Bus) adapter offers a cost-effective solution that bridges the compatibility gap between modern computers & legacy parallel peripherals. ...

The PEX56KIM PCI Express V.92 56K Data Fax Modem lets you add an internal modem for dial-up Internet access & fax support to your computer, through an available PCI Express x 1 (or higher) slot. With support for transfer rates up to 56 Kbps (data) & 14.4 Kbps (fax), & compatibility with the latest transmission standards (V.92, V.90, etc.), this versatile PCIe modem can be used as a backup Internet connection, or in rural areas where broadband connections are not available. For flexible installation options, the card comes equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket suitable for installation in a small form factor PC. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage Broad telecom compatibility with support for several common data/fax communication standards Fits almost any PC case, with included low & full profile brackets

...

The USB2SLSATINT USB (Universal Serial Bus) 2.0 to Slim SATA adapter lets you connect a Slimline SATA optical drive directly to a motherboard's USB (Universal Serial Bus) 2.0 header. The adapter features a Slimline SATA connector on one side & a 5-pin USB (Universal Serial Bus) 2.0 header connector on the other. The converter/adapter is powered via the USB (Universal Serial Bus) connection, but

Includes:: a floppy drive (SP4) connector for additional power if required. The adapter features a PCB-mounted design that can be securely fastened to the optical drive, eliminating loose connections & saving space within the computer chassis.

...

Star Tech.com it-Stand Desk Converter
- Large 35” Work Surface Work in comfort & enhance productivity, by turning your desk
...

Join two Cat 5e patch cables together to make a longer cable. A cost-effective solution
- couple two Cat 5e RJ45 network cables
...