The GCAUD3535FF Audio Cable Adapter/ Audio Coupler features two 3.5mm audio female connectors, providing a cost-effective way to combine two standard 3.5mm stereo headphone cables or convert a standard audio cable into an extension cable. ...

Turn 4 SATA hard drives into external RAID storage that connects over USB/ Fire Wire/e SATA Support for up to 4 drives provide large amounts of storage with a choice of high speed interfaces from USB (Universal Serial Bus) 2.0, Fire Wire 400/800 or e SATA The removable front cover & accessible drive bays allows drives to be replaced easily in case of failure or upgraded Built-in support for numerous RAID modes for most personal/business needs & an 80mm controllable cooling fan to keep drives from overheating Star Tech.com''s S354UFER External SATA RAID Enclosure is a high-performance external RAID storage solution, supporting up to 4 high capacity (tested with up to 4TB per bay) 3.5" SATA hard drives (supports SATA, SATA II & SATA III-6 Gbps). The 4-bay RAID enclosure can be connected to the host/source computer through USB (Universal Serial Bus), e SATA or Fire Wire & automatically builds your SATA RAID array based on your selection (Spanning, RAID 0, RAID 1, RAID 1+0, RAID 3, & RAID 5 supported), delivering a simple, yet flexible external storage solution. Designed for convenience, the enclosure features front panel LED indicators that provide RAID information & simple hard drive status & activity monitoring. The enclosure also features a built-in 3-speed 80mm fan with automatic or manual controls that allow you to customize the speed of the fan as necessary, ensuring suitable operating temperatures for optimized drive performance. What’s in the box Four drive HDD enclosure e SATA Cable USB (Universal Serial Bus) Cable 6 pin Fire Wire cable 9 pin Fire Wire cable Screw driver & screw kit Power Cord (NA/ UK/ EU) Universal Power Adapter Instruction Manual ...

Turn an Internal 3.5" SATA or IDE Hard Drive into an External USB/e SATA Hard Drive Convert either an IDE (PATA) or SATA hard drive into an external storage solution with USB (Universal Serial Bus) 2.0 or e SATA connectivity A screwless design allows for quick & easy installation or removal of hard drives from the enclosure without the use of any tools Backed by a Star Tech.com 2-year warranty & free lifetime technical support This Info Safe 3.5in IDE/SATA external hard drive enclosure connects to a host computer through either USB (Universal Serial Bus) 2.0 (SATA or IDE) or e SATA (SATA only), delivering versatility & cost-effectiveness. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computers storage/backup capabilities. This black aluminum drive enclosure features a screwless snap-in design for hard drive installation that saves your valuable time, & supports any standard 3.5in SATA or IDE hard drive
- allowing you to customize your external storage solution based on your preference of hard drive model & manufacturer. The External hard drive enclosure features a large built-in 80mm fan that provides enhanced re-distribution of heat build-up generated as a result of typical drive operation. This feature is especially important for larger capacity hard drives, & faster &8220;spinning" drives (i.e 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity & the drives lifespan by reducing the chances of premature failures. Designed to provide a convenient & efficient operating experience, the enclosure features " One Touch Backup", which automates backup tasks, allowing you to backup files & folders at the touch of a button, based on pre-defined settings within the easy to use software utility (included). What&8217;s in the box Enclosure Enclosure Stand e SATA Cable LP4 Cable SATA Power Cable USB (Universal Serial Bus) Cable Power Adapter Driver CD Instruction Manual
...

Info Safe 3.5" e SATA/USB 2.0 Removable SATA HD Enclosure Quickly & easily install or remove hard drives from the enclosure with the innovative trayless design Efficiently access a high capacity SATA drive over e SATA or USB (Universal Serial Bus) 2.0 connectivity Backed by a Star Tech.com 2-year warranty & free lifetime technical support This e SATA/USB Removable SATA HD Enclosure features a convenient trayless design that eliminates having to mount the hard drive in the enclosure, making it easier to access data on the fly. Simply insert any 3.5in SATA (SATA, SATA II, SATA III) hard drive into the enclosure, close the panel door & connect the enclosure to the computer through either e SATA (external SATA) or USB (Universal Serial Bus). To remove the hard drive from the enclosure, simply open the panel door & pull the SATA hard drive out. Because the SAT3510BUEGB drive enclosure can be connected to a host computer through either e SATA or USB (Universal Serial Bus), you can rely on efficient data transfer speeds (up to 1.5 Gbps for e SATA, 480 Mbps for USB (Universal Serial Bus) 2.0) & quick connectivity. The enclosure is constructed to provide a durable housing for inserted drives to prevent physical damage to the drives while in transit, & features lockable front door access for added data security. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer''s storage/backup capabilities. To ensure a cool operating environment, the SATA HDD enclosure provides a built-in 40mm fan that re-distributes the heat build-up generated as a result of typical hard drive operation
- which is especially important for large volume storage & faster spinning drives (i.e. 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity & the drive''s lifespan by reducing the chances of premature failures. What’s in the box Enclosure e SATA Cable USB (Universal Serial Bus) 2.0 Cable Screw Pack Power Adapter Manual
...

Providing a stable platform for use with Compact Flash (I & II) & IBM Micro-drive media, this Compact Flash Card to IDE Adapter with 3.5" Bay Enclosure installs easily through a simple connection to an available IDE port, for use in either the front or back of a host computer. ...

Install a 3.5in hard drive into a single 5.25in front bay Mount almost any 3.5in device into a standard 5.25in front bay Backed by a Star Tech.com 2-year warranty & free lifetime technical support This plastic, floppy-drive adapter bracket lets you install a 3.5in floppy drive into a 5.25in bay. A simple solution that lets you position a 3.5in floppy drive in a computer case as needed (without being confined to the 3.5in floppy bay determined by the case layout), the floppy drive adapter bracket features an attractive open-faced black bezel that provides a snug, secured fit for installed drives. What’s in the box Front Bay Adapter Bracket Mounting Screws ...

This 3.5in SATA to Compact Flash SSD Adapter Card means that you can connect a Compact Flash card to a host computer through a Serial ATA data port
- a cost-effective solution that lets you use solid state storage in place of a SATA hard disk drive. The adapter

Includes:: a 3.5in bracket that lets you mount it in the front or rear panel of the computer case, suitable for any 3.5in drive bay or available expansion slot
- providing easy access to the CF slot. Once the adapter is installed in the computer, the Compact Flash card can be used as an ejectable, bootable drive
- providing full read & write access to the CF card, as if it were a SATA hard drive.




...

Provide protection against shocks/impacts to a 3.5in hard drive The removable end cap leaves the rest of the drive protected while it is in use, & protects the connectors when the drive is not in use Designed to be stackable, for ease of storage BENEFITS 3 This two piece silicone hard drive protector sleeve provides a layer of sturdy protection against potential shock/impact damage for your 3.5in hard drives. When enclosed with larger top portion of sleeve, they provide added stability & protection for 3.5 in. SATA hard drives while inserted in any Star Tech.com Hard Drive Docking stations (SATADOCKU2, SATADOCKU2E, SATADOCK22UE) & most third party HD docks. This stackable versatile hard drive sleeve also offers the flexibility to fit most uninstalled IDE & SATA/SAS 3.5in HDDs, featuring a tip cover that''s specifically designed to protect the hard drive interface ports during transportation or stacking, but can be removed for installation. The hard drive protector features a durable silicon design & a ventilation hole in the top portion for enhanced heat dissipation. The HDDSLEV35 is the perfect accessory to our SATA Hard Drive docks & "bare drive" (trayless) hard drive enclosures, & for keeping unused drives safe while not in use. What’s in the box 3.5in Hard Drive Protector Sleeve ...

Turn a 3.5in SATA drive into an external storage device with USB (Universal Serial Bus) 2.0 connectivity Simple, cost effective SATA hard drive enclosure with a high speed USB (Universal Serial Bus) 2.0 connection Backed by a Star Tech.com 2-year warranty & free lifetime technical support This External Hard Drive Enclosure lets you install a 3.5in Serial ATA hard drive for connection to a computer using USB (Universal Serial Bus) 2.0
- a cost-effective storage solution for a wide variety of applications including file & application sharing between desktop & notebook computers, data archiving, or simply backing up existing hard drives to preserve data security. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer''s storage/backup capabilities. Designed with modern computer systems in mind, the external USB (Universal Serial Bus) 2.0 SATA hard drive enclosure is compatible with the IT industry''s newest 3.5in Serial ATA (SATA, SATA II, SATA III) hard drives & offers a sturdy & attractive aluminum casing that looks terrific next to any MAC or PC system. The SATA hard drive enclosure is compatible with a broad range of operating systems, including Windows 98/ME/XP/ Vista, Mac OS 9.0 & up, as well as Linux. Plus, the enclosure supports Apple''s Mac OS X Leopard operating system, including its breakthrough automatic backup feature " Time Machine". What’s in the box Aluminum HD Enclosure Plastic Stand USB (Universal Serial Bus) Cable Screw Kit Power Adapter Instruction Manual
...

Th Star Tech.com SAT3510BU3 USB (Universal Serial Bus) 3.0 External Hard Drive Enclosure lets you connect a 3.5” SATA hard drive through USB (Universal Serial Bus) 3.0. A cutting edge external storage solution that lets you harness the speed & performance supported by the Super Speed USB (Universal Serial Bus) interface. Supporting data transfer rates of up to 5 Gbps, 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA 3 Gbps e SATA, plus backward compatible with USB (Universal Serial Bus) revisions 2.0 (480 Mbps) & 1.1 (12 Mbps), so the enclosure can be used with older systems that don’t support USB (Universal Serial Bus) 3.0 yet.

Specification Bus Interface: USB (Universal Serial Bus) 3.0 Connectors: 1 x USB (Universal Serial Bus) 3.0 type B; 1 x DC Power Fans: 1 x 80mm LEDs: 1 x Power/ Activity Maximum Data Transfer Rate: (USB 3.0) 5 Gbps Compatible Hard Drives 3.5” SATA drive (internal) up to 2TB capacity Power Adapter: 12VDC, 2A, center positive Operating Temperature: 0°C ~ 60°C (32°F ~ 140°F) Storage Temperature: 0°C ~ 70°C (-4°F ~ 158°F) Humidity: 10 ~ 90% RH Dimensions: 143.0mm x 52.1mm x 180.0mm Weight: 580g Warranty: 2 Year Manufacturer Warranty Compatible Operating Systems Windows 2000/XP/ Server 2003/ Vista/ Server 2008 R2/7 (32/64), Mac OS X, Linux System Requirements Internal 3.5” SATA compatible storage drive USB (Universal Serial Bus) enabled computer system with available port Microsoft Windows 2000/XP/ Server 2003/ Vista/ Server 2008 R2/7 (32/64-bit) or Apple Mac OS X or Linux

...