Bridge the gap in your workspace with Star Tech.com's straight-through patch cables. Constructed with only finest top quality components, the coloured hoods help keep things in your department organized. Strain relief minimizes the damage to the ends of the plugs by preventing the cable from being bent at sharp angles. Product Features Clip protector keeps the plug from snagging while routing the cable Coloured Hoods for departmental colour coding Star Tech Category 5e patch cables are carefully constructed & tested, to keep the Near End Crosstalk (NEXT) well within acceptable limits Star Tech Category 5e Patch cables are constructed with finest top quality components The Strain relief prevents the cable from being bent at sharp angles at the connector to minimize the stress at the plug termination point ...

This ceiling TV mount supports VESA mount compatible TVs from 32" to 75" in size, with a weight capacity of up to 110 lb. (50 kg). It lets you save wall & floor space by hanging your flat-panel LCD, LED or plasma TV from the ceiling in a prominent area. The ceiling mount is ideal to be used in corporate boardrooms, lobbies, entrances, restaurants, bars & meeting places. Adjustable Height With a telescopic pole, the TV mount lets you suspend a display at your desired distance from the ceiling. This works well with a range of ceiling heights. The steel pole can extend from 42" to 61" (1060 to 1560 mm), with a total lift (height extension) of 19.7" (500 mm). Swivels to Suit Your Ceiling The flat-screen ceiling mount accommodates a wide variety of ceiling types. You can swivel the TV to work with virtually any type of ceiling for level viewing, including sloped ceilings (up to 60 degrees), & pitched or horizontal (flat) ceilings. Viewable from Any Direction You can adjust your TV to create a comfortable viewing angle, by tilting it up to -25 degrees down towards your audience for optimum visibility. Plus, the full-motion mount lets you swivel your display around the pole + 180 /
- 180 degrees, without using tools.
...

The SFPGLCLHSMST Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC – 10 km (6.2 miles) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Single-Mode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps, this LC SFP/ Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. ...

The SFPGLCSXMMST Cisco Compatible Gigabit Fiber SFP Transceiver Module MM LC – 550m (1804 ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Multimode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps, this LC Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. This 850nm multi-mode SFP module is compatible with the Cisco GLC-SX-MM transceiver. Also a perfect accessory for the Star Tech.com PCI Express Open SFP NIC (PEX1000SFP), or Gigabit POE Open SFP Media Converter (ET1110PSE) products. Features Data rates up to 1.25 Gbps Supports distances up to 550m (1804ft) Complies with SFP Multi-Source Agreements standards (MSA) Compatible with Cisco equipment LC Fiber connector Fully Hot Pluggable

Specification Warranty 3 Years Hardware Industry Standards IEEE 802.3z 1000BASE-SX WDM No Performance Compatible Networks 1000 Mbps (1 Gbps) DDM No Fiber Operating Mode Half/ Full-Duplex Fiber Type Multi Mode Max Transfer Distance 550 m (1804 ft) Maximum Data Transfer Rate 1.25 Gbps Wavelength 850nm Connector (s) Local Unit Connectors 1
- Fiber Optic LC Duplex


...

The SFPGESST Cisco Compatible Gigabit Fiber SFP Transceiver Module MM LC – 550m (1804 ft) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Multimode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/ Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. Delivering both convenience & scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. This 850nm multi-mode SFP module is compatible with the Cisco SFP-GE-S transceiver. Backed by a Star Tech.com 3-year warranty & free lifetime technical support. Features Data rates up to 1.25 Gbps Supports distances up to 550m (1804ft) Complies with SFP Multi-Source Agreements standards (MSA) Compatible with Cisco equipment LC Fiber connector Fully Hot Pluggable

Specification Warranty 3 Years Hardware Industry Standards IEEE 802.3z 1000BASE-SX WDM No Performance Compatible Networks 1000 Mbps (1 Gbps) DDM Yes Fiber Operating Mode Half/ Full-Duplex Fiber Type Multi Mode Max Transfer Distance 550 m (1804 ft) Maximum Data Transfer Rate 1.25 Gbps Wavelength 850nm Connector (s) Local Unit Connectors 1
- Fiber Optic LC Duplex Female


...

The SFP10GAOC3M is a Cisco SFP-10G-AOC3M compatible fiber optical SFP cable that is designed, programmed & tested to work with Cisco brand 10 Gb compatible servers or routers & complies with MSA industry standards. This active optical SFP cable (AOC) supports 10 Gb E applications connected through SFP+ (Mini-GBIC) ports & is hot-swappable, making upgrades & replacements seamless by minimizing network disruptions. The AOC cable is lighter & more flexible than SFP+ direct-attach cables which makes it absolutely ideal for installation in tight spaces & over longer distances. Designed for high-speed interconnects, this low-power, low-latency optical cable is ideal for applications such as point-to-point in-rack & across-rack network switch or server connections. ...

The SFP10GLRSST is a Cisco SFP-10G-LR-S compatible fiber transceiver module that has been designed, programmed & tested to work with Cisco™ brand switches & routers. It delivers dependable 10 Gb E connectivity over fiber cable, for 10GBASE-LR compliant networks, with a maximum distance of up to 10 km (6.2 mi). ...

The SFPH10GACU10 is a Cisco SFP-H10GB-ACU10M compatible direct-attach copper SFP+ cable that’s designed, programmed & tested to work with Cisco brand compatible switches & routers & complies with MSA industry standards. This Active Twinax copper cable supports 10 Gigabit Ethernet applications connected through SFP+ (Mini-GBIC) ports. This copper SFP+ cable is hot-swappable, making upgrades & replacements seamless by minimizing network disruptions. Designed for high-speed performance, this low-power, low-latency SFP+ cable is a cost-effective alternative to fiber-optic cable assemblies, supporting short-distance applications such as point-to-point in-rack network switch or server connections. ...

The SFPH10GBACU7 is a Cisco SFP-H10GB-ACU7M compatible direct-attach copper SFP+ cable that’s designed, programmed & tested to work with Cisco brand compatible switches & routers & complies with MSA industry standards. This Active Twinax copper cable supports 10 Gigabit Ethernet applications connected through SFP+ (Mini-GBIC) ports. This copper SFP+ cable is hot-swappable, making upgrades & replacements seamless by minimizing network disruptions. Designed for high-speed performance, this low-power, low-latency SFP+ cable is a cost-effective alternative to fiber-optic cable assemblies, supporting short-distance applications such as point-to-point in-rack network switch or server connections ...

The SFPH10GBCU15 is a Cisco SFP-H10GB-CU1-5M compatible direct-attach copper SFP+ cable that’s designed, programmed & tested to work with Cisco brand compatible switches & routers & complies with MSA industry standards. This passive Twinax copper cable supports 10 Gigabit Ethernet applications connected through SFP+ (Mini-GBIC) ports. This copper SFP+ cable is hot-swappable, making upgrades & replacements seamless by minimizing network disruptions. Designed for high-speed performance, this low-power, low-latency SFP+ cable is a cost-effective alternative to fiber-optic cable assemblies, supporting short-distance applications such as point-to-point in-rack network switch or server connections. ...