The Microflex Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms, these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors & pickup patterns for customized table installations Only 1.25 inch (3.8 cm) in diameter Cardioid, omni & bidirectional polar patterns Wide dynamic range & smooth frequency response Available in black, white & aluminum Bi-color status indicator available with -LED models Logic input for remote LED control Comm Shield Technology Type Condenser (electret bias) Frequency Response 50 to 17000 Hz Polar Pattern MX395/O: Omnidirectional MX395/C: Cardioid MX395/BI: Bidirectional Output Impedance EIA Rated at 150 Ohms (170 Ohms actual) Output Configuration Active balanced Sensitivity (at 1 k Hz, open circuit voltage) Cardioid: -35 d BV/ Pa (18 m V) Omnidirectional: -28 d BV/ Pa (42 m V) Bidirectional: -37 d BV/ Pa (14 m V) 1 Pascal=94 d B SPL Maximum SPL (1 k Hz at 1% THD, 1 kilohms load) Cardioid: 121 d B Omnidirectional: 114 d B Bidirectional: 123 d B Equivalent output Noise (A-weighted) Cardioid: 28 d B SPL Omnidirectional: 21 d B SPL Bidirectional: 29 d B SPL Signal-to-Noise Ratio (referenced at 94 d B SPL at 1 k Hz) Cardioid: 66 d B Omnidirectional: 73 d B Bidirectional: 65 d B Dynamic Range (1 kilohm load at 1 k Hz) Cardioid: 93 d B Omnidirectional: 93 d B Bidirectional: 94 d B Common Mode Rejection (10 Hz
- 100 k Hz) 45 d B minimum Preamplifier output Clipping level (1% THD) -8 d BV (0.4 V) Polarity 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector. 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector. Weight Net: 0.136kg (0.30 lbs.) Packaged: 0.374kg (0.825 lbs.) Logic Connections LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V. Environmental Conditions Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F) Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F) Relative Humidity: 0 to 95% Power Requirements MX395: 11
- 52 Vdc phantom, 2.0 m A MX395-LED: 48
- 52 Vdc phantom, 8.0 m A


...

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but its true. Available in black or white finishes, & with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. ...

Equipped with features like programmable, silent membrane switches, logic inputs & outputs, & LED indicators, Microflex Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms & distance learning centers. Every Microflex Boundary microphone features a choice of interchangeable condenser cartridges. MX391:

Includes:: attached 4 meter (12 ft) cable terminated with a 4-pin mini connector & separate preamplifier. A rubber strain relief is provided for applications that require removing the 4-pin mini connector & connecting the mic cable directly to screw terminals in the preamplifier. Flat frequency response across the vocal range for uncolored sound Interchangeable cardioid, supercardioid, & omnidirectional cartridges that provide optimal choice for each application Sleek, low-profile design for unobtrusive appearance Balanced, transformerless output for increased immunity to noise over long cable runs Programmable on/off switch & LED on/off indicator (MX392/MX393 models only) LED logic input & switch logic output terminals for remote control or use with automatic mixers (MX392 models only) Frequency Response
- 50 to 17, 000 Hz (Preamp Only) lmpedance
- 180 ohms actual (rated at 150 ohms) (Preamp Only) Output Level
- -6 d BV (0.5 V), 12 d B at 0 gain (Preamp Only) Phantom power required?
- 11 to 52 Vdc phantom, 2.0 m A current consumption (Preamp Only)





...

The Performance Gear series is your entry to the professional brand world of Shure. The PG-58 is ideal for day-to-day use on the stage or in the rehearsal room. The set also

Includes:: a seamlessly adjustable " On-Stage Stands" branded st&. This equips you for the next superstar casting session, & saves you money at the same time.

...

The Shure Performance Gear PG58 wireless system is the perfect introduction to our wireless portfolio. Combining superior sound quality & stage proven endurance with advanced features like Internal Antenna Diversity & frequency selectability. This package comprises a PG2 handheld transmitter with an PG58 microphone head & PG4 diversity receiver. Hassle free setup Internal antennas simplify operation & storage Only one channel select button A seven-segment LED indicated instantly if the selected channel is occupied System technical specifications Compatible systems per frequency band (up to): 4 Selectable frequencies: 10 Auto Setup

Features: No Audio Reference Companding: No Included Antennas: Internal 1/4-wave Antenna Options: No Receiver Network Ability: No PC Control: No Rack Hardware: Optional (URT) Case: Optional System Case Transmitter Display: Multi-color LED Receiver Display: Multi-color LED Battery, Endurance: 9V, >8 h Environment: Small to medium stages Further Technical Specs PG4 Receiver Output Impedance XLR connector: 200 & Ugrave; 1/4 inch connector: 1k& Ugrave; Audio Output Level Ref. +/– 33 k Hz deviation with 1 k Hz tone XLR connector (into 100K & Ugrave; load): –19 d BV, typical 1/4 inch connector (into 100K & Ugrave; load): –5 d BV, typical Sensitivity –105 d Bm for 12 d B SINAD, typical Image Rejection >50 d B, typical

Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)

Dimensions
- PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.) Weight 241 grams (8.5 oz) Weight
- PG88 429 grams (15.1 oz) Housing Molded ABS Power Requirements 12–18 Vdc at 160 m A (PG4), 320m A (PG88), supplied by external power supply PG2 Handheld Transmitter Audio Input Level +2 d BV maximum at -10d B position -8 d BV maximum at 0d B position Gain Adjustment Range 10d B RF Transmitter Output 10 m W typical (dependent on applicable country regulations)

Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.) Weight 218 grams (7.7 oz.) without battery Housing Molded ABS handle & battery cup Power Requirements One 9V alkaline or rechargeable battery Battery Life Up to 8 hours (alkaline)









...

92m operating range Multi-color LED indicating power, lockout, mute & low battery 90 selectable UHF frequencies that operate on an 18 M Hz UHF bandwidth Diversity Reception system uses twin receiver circuits to minimise noise & drop out caused by RF interference Use up to 9 systems simultaneousy within the 846
- 865 Mhz range 8+ Hour Battery Life PGX4 has has XLR & unbalanced 1/4 inch jack audio outputs PGX1

Includes:: mute switch & battery power warning lights Carrying case included


...

What is the SRH440 best suited to? The SRH440 Headphones are ideal for recording & monitoring in your home studio. The impedance, power handling & sensitivity have all been optimized for performance with professional audio devices such as mixing consoles, dj mixers & headphone amplifiers. What are the features? It has a closed-back, circumaural design that rests comfortably over the ears which reduces background noise. The adjustable headband & collapsible construction provides extra comfort & portability. It has an enhanced frequency response to deliver accurate audio across an extended range. Enhanced frequency response delivers accurate audio across an extended range Impedance & power handling optimized for performance with professional audio devices Adjustable headband & collapsible construction provide comfort & portability Bayonet clip securely locks detachable cable into ear cup ...

The Shure SE115 earphones are designed for music lovers looking for a stunning audio performance, they have been tested by ...

DYNAMIC DRIVER WITH enhanced BASS The SE215 is the entry to Shure SE earphones. It features a Dynamic driver for a detailed warm sound with enhanced bass. SOUND ISOLATING DESIGN Sound Isolating Earphones were originally developed as Personal Monitor Systems to allow musicians to hear their own performances in loud onstage environments. They work by using soft flexible sleeves to block up to 90 % of the background noise. You can concentrate on your music whether you are on-stage in a train on the street or working out. At the same time you can reduce the audio level to conserve your hearing. DETACHABLE CABLE WITH WIREFORM FIT The SE215 features a durable Kevlar reinforced cable that allows easy replacement or customisation. The formable wire ensures secure placement & over the ear configuration keeps cables out of the way. The gold plated MMCX connector has a lock-snap mechanism allowing 360 degree rotation for comfortable fit. AN ASSORTMENT OF SLEEVES FOR INDIVIDUAL FIT Because every ear is different the Fit Kit

Includes:: an assortment of foam & silicone sleeves in different sizes. Experiment with the size & style that creates the best fit for you. A good seal is key to optimizing sound isolation & bass response as well as maximizing comfort during extended wear. Avoid using headphoneswith the volume turned up for an extended period of time. Doing so can damageyour hearing. It is advisable to keep the volume at a moderate level at alltimes. For your own safety please do not use when driving or cycling.

...

The SE315 Sound Isolating earphones deliver full spectrum of sound with the High Definition Micro Driver. The Tuned Bass Port Technology improves the circulation of air circulation around the driver & thus optimizes the playback of low frequencies. The Kevlar reinforced cable is detachable for simple replacement. ...