The Shure Performance Gear PG30/PG58 dual wireless system is the perfect introduction to our wireless portfolio. This package comprises a PG1 Bodypack transmitter, a PG30 headworn mic, a PG2 handheld transmitter & a PG88 diversity receiver. Hassle free setup Internal antennas simplify operation & storage Only one channel select button A seven-segment LED indicated instantly if the selected channel is occupied Reliable wireless technology Microprocessor controlled Predictive Diversity 10 selectable frequencies Up to 4 compatible systems per band Shure standard ruggedness ...

The Shure Performance Gear Dual PG58 wireless system is the perfect introduction to our wireless portfolio. This package comprises two PG2 handheld transmitters with PG58 microphone heads & a PG88 diversity receiver. Hassle free setup Internal antennas simplify operation & storage Only one channel select button A seven-segment LED indicated instantly if the selected channel is occupied Reliable wireless technology Microprocessor controlled Predictive Diversity 10 selectable frequencies Up to 4 compatible systems per band ...

GX Series amplifiers are ideal for professional entertainers who require maximum performance & portability on a limited budget. QSC designers, headed by Pat Quilter, have optimized output & appearance while reducing raw material cost & weight. Its all here – dramatic styling, easy hookup & adjustments, excellent audio quality & QSC reliability. Power levels matched to the most popular speakers used by entertainers Optimized for maximum real-world headroom into 4 ohm & 8 ohm speaker systems Inputs: XLR, 1/4" TRS & phono input connectors for compatibility with any source Outputs: Speakon combo accepts, 1/4" (TS) plugs or Speakon 2-pole & 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems. Minimum depth chassis (10.1" / 257 mm) fits in compact, inexpensive effects racks Lightweight – GX3 & GX 5 less than 30 lbs (13.5 kg), GX7 only 15.5 lbs (7 kg) Detented gain controls for precise setting & matching of sensitivity Guard Rail™ automatically protects the amplifier & loudspeakers from damage due to temperature rise or overdrive without shutting down the show Front panel LEDs monitor Power, Signal & Clipping Subwoofer/ Satellite crossover built-in ...

The unidirectional (cardioid) pickup pattern of the SV100 helps reduce feedback, while the wide frequency response & high output deliver excellent sound quality. Ideal for spoken-word presentations, karaoke performances, multimedia, & instrument use, the SV100

Includes:: a durable cable with 14;" (6.3 mm) plug for use with home or portable recording/karaoke systems. Frequency Range 50–15, 000 Hz Impedance 600 Ohm Sensitivity -52 d BV/ Pa* at 1k Hz *1 Pa=94 d B SPL Connector XLR-14;" (6.3 mm) Cable Length 15′ (4.5 meters)

...

The unidirectional (cardioid) pickup pattern of the SV200 helps reduce feedback, while the wide frequency response & high output deliver crisp, clear, & vibrant sound. Ideal for lead & backup vocals, karaoke performances, & high-quality presentations, the SV200 also

Includes:: a dent-resistant grille & a durable XLR-XLR cable. Frequency Range 50¨C15, 000 Hz Impedance 600 Ohm Sensitivity -52 d BV/ Pa* at 1k Hz *1 Pa=94 d B SPL Connector XLR-XLR Cable Length 15¡ä (4.5 meters)

...

Tailored frequency response is smooth & extended. Tuned specifically for vocal applications. Cardioid polar pattern picks up the most sound from in front of the microphone & some sound from the sides. Less susceptible to feedback in high volume settings. Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. Cartridge

Includes:: a neodymium magnet for high output level. Durable metal construction. On/off switch for onstage control. Steel mesh ball grille with integral "pop" filter reduces explosive breath sounds & wind noise. Type Dynamic Frequency Response 70 to 15, 000 Hz Polar Pattern Cardioid

...

The Shure PG58 is a unidirectional (cardioid) dynamic vocal microphone tuned to accentuate the clarity of lead & back-up vocals. Tailored frequency response is smooth & extended. Tuned specifically for vocal applications. Cardioid polar pattern picks up the most sound from in front of the microphone & some sound from the sides. Less susceptible to feedback in high volume settings. Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. Cartridge

Includes:: a neodymium magnet for high output level. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Hardened steel mesh ball grille that resists wear & abuse. Integral "pop" filter reduces explosive breath sounds & wind noise.

Includes:: 15ft (4.57m) cable, break-resistant mic clip & storage bag. Microphone Type Dynamic (moving coil) Frequency Response 60 to 15, 000 Hz Polar Pattern Cardioid Output Impedance EIA rated at 150 ohms (300 ohms actual) Sensitivity at 1 k Hz, open circuit voltage 2.2 m V 1 Pascal=94 d B SPL Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Net Weight 321 g (0.71 lb) Connector Three-pin professional audio (XLR), male Operating Temperature -29 deg to 57 deg C (-20 deg to 135 deg F) Relative Humidity 0 to 95%



...

The Microflex Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms, these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors & pickup patterns for customized table installations Only 1.25 inch (3.8 cm) in diameter Cardioid, omni & bidirectional polar patterns Wide dynamic range & smooth frequency response Available in black, white & aluminum Bi-color status indicator available with -LED models Logic input for remote LED control Comm Shield Technology Type Condenser (electret bias) Frequency Response 50 to 17000 Hz Polar Pattern MX395/O: Omnidirectional MX395/C: Cardioid MX395/BI: Bidirectional Output Impedance EIA Rated at 150 Ohms (170 Ohms actual) Output Configuration Active balanced Sensitivity (at 1 k Hz, open circuit voltage) Cardioid: -35 d BV/ Pa (18 m V) Omnidirectional: -28 d BV/ Pa (42 m V) Bidirectional: -37 d BV/ Pa (14 m V) 1 Pascal=94 d B SPL Maximum SPL (1 k Hz at 1% THD, 1 kilohms load) Cardioid: 121 d B Omnidirectional: 114 d B Bidirectional: 123 d B Equivalent output Noise (A-weighted) Cardioid: 28 d B SPL Omnidirectional: 21 d B SPL Bidirectional: 29 d B SPL Signal-to-Noise Ratio (referenced at 94 d B SPL at 1 k Hz) Cardioid: 66 d B Omnidirectional: 73 d B Bidirectional: 65 d B Dynamic Range (1 kilohm load at 1 k Hz) Cardioid: 93 d B Omnidirectional: 93 d B Bidirectional: 94 d B Common Mode Rejection (10 Hz
- 100 k Hz) 45 d B minimum Preamplifier output Clipping level (1% THD) -8 d BV (0.4 V) Polarity 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector. 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector. Weight Net: 0.136kg (0.30 lbs.) Packaged: 0.374kg (0.825 lbs.) Logic Connections LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V. Environmental Conditions Operating Temperature: -18 to 57 deg. C (0 to 135 deg. F) Storage Temperature: -29 to 74 deg. C (-20 to 165 deg. F) Relative Humidity: 0 to 95% Power Requirements MX395: 11
- 52 Vdc phantom, 2.0 m A MX395-LED: 48
- 52 Vdc phantom, 8.0 m A


...

It is hard to believe that such small, unobtrusive microphones can produce such great sound, but its true. Available in black or white finishes, & with in-line or plate mount preamps, MX202 Microflex Overhead condenser microphones capture high-quality sound in a compact, adjustable package. ...

Equipped with features like programmable, silent membrane switches, logic inputs & outputs, & LED indicators, Microflex Boundary Microphones are the high-quality solution for a range of applications such as altars, boardrooms & distance learning centers. Every Microflex Boundary microphone features a choice of interchangeable condenser cartridges. MX391:

Includes:: attached 4 meter (12 ft) cable terminated with a 4-pin mini connector & separate preamplifier. A rubber strain relief is provided for applications that require removing the 4-pin mini connector & connecting the mic cable directly to screw terminals in the preamplifier. Flat frequency response across the vocal range for uncolored sound Interchangeable cardioid, supercardioid, & omnidirectional cartridges that provide optimal choice for each application Sleek, low-profile design for unobtrusive appearance Balanced, transformerless output for increased immunity to noise over long cable runs Programmable on/off switch & LED on/off indicator (MX392/MX393 models only) LED logic input & switch logic output terminals for remote control or use with automatic mixers (MX392 models only) Frequency Response
- 50 to 17, 000 Hz (Preamp Only) lmpedance
- 180 ohms actual (rated at 150 ohms) (Preamp Only) Output Level
- -6 d BV (0.5 V), 12 d B at 0 gain (Preamp Only) Phantom power required?
- 11 to 52 Vdc phantom, 2.0 m A current consumption (Preamp Only)





...