Features Weather Shield for the CL3622B & CL6011B Outdoor Station Constructed in SPCC Silver colour finish Provides added protection during extreme weather conditions or where outdoor station fitted in an exposed location Fits securely behind the Outdoor Station Easy to fit at time of kit installation or retro-fit to existing installation Thickness 1mm ...

The Door Unlock Module power supply is compatible with the CL3622UM Unlock Module Interface & the CL3622B/CL6011B outdoor stations & will supply both with mains power. The Unlock Module Interface requires the CLOSPSU to power the device.

Features: UK 3 pin plug in 12v 0.3A adaptor Converts the Outdoor station from battery powered to mains powered Note: Door Lock Mechanism & Intercom Systems/handsets not supplied

...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

The P910 is a high performance wireless Pet Tolerant PIR motion detector. It consists of a digital dual-core fuzzy logic infrared control chip & intelligent analysis which effectively identifies interference signals from body movement signals & reduces false alarm rate. With automatic temperature compensation & anti-air turbulence technology, it easily adapts to environmental changes. The detector also has the advantages of energy saving, reliability & easy installation.

Features: Detection coverage: 8m/110° Pet immunity up to 25kgs Temperature compensation control Low battery transmitter to the control panel Anti-Air turbulence technology Walk test mode Battery powered Energy Saving Low power LED indication Tamper protection Internal antenna Compatible with any mi Guard alarm system (A8, A9, A11, G3, G5) Transmit distance: 80m (open area) WHAT'S IN THE BOX: Passive Infra-Red PIR Detector x 1 Bracket x 1 Fixing Screw Pack AA 1.5V LR6 battery x 2

...

The mi Guard A11 is a completely wirefree PSTN alarm system. The control panel has a touch keypad & an LCD display with a guide menu for easy programming. The panel can be disarmed using the RFID tags, & unlock an electronic door lock. The PSTN panel can store 6 phone numbers & 2 ADEMCO CID CMS numbers. Remote arm, disarm & monitor the alarm by phone operation, as well as use voice prompts during phone remote control. When an alarm condition occurs, a recordable 10 second voice memo & alarm voice message will be played. A Duress code can be used, which will enable the alarm to send out an activation notification silently. The panel supports Entry & Exit delays, & will provide feedback of Low power & tamper alarm for the wireless sensors. A Wirefree External Solar Siren can easily be added for additional protection.

Features: Touch Keypad with LCD Display Communication Alarm with Automatic Telephone Dialler Self Monitor using your existing telephone Line Remote Arm/ Disarm Monitoring by phone with “ Listen In” feature Arm via Free Phone Call, Control Panel, Remote Control Disarm by Free Call, Control Panel, Remote, RFID Tag Arm, Home Arm, Disarm Modes (home arm has silent arming delay) Supports up to 50 wireless sensors, 10 remotes, 50 RFID tags For ease of installation, all included accessories are pre-programmed to the control panel. Any additional accessories will need to be learnt to the panel Touch Keypad:
- 150 Event Log
- Exit & Entry Delay
- Call status light
- Stores 6 alarm phone numbers
- Stores 2 Central Monitoring Station numbers (Contact ID)
- Hands free calling
- Speed dial to master number
- RFID swipe tag disarm: audio/visual confirmation
- Listen-in feature with 2 way talk & monitoring
- Voice memo feature
- Internal Siren

Volume: Off, Low, High
- Siren time 1-9 Minutes Supports electronic door lock Tamper protection WHAT'S IN THE BOX: Mains Powered Control Panel (with battery backup & internal siren) x 1 Control Panel Power Adapter x 1 Remote control x 2 RFID tag x 2 Door / window contact x 1 PIR motion detector x 1 All Fixings & Fittings Installation & Operating Instructions Specification: Control Panel’s Power Supply: Input: AC 100~240V/50~60 Hz Output: DC 12V/500 Ma 6 Wh Standby Current: ≤ 90m A Alarm Current: ≤ 300m A Internal Battery Backup: 3.7V/800m Ah x 2pcs (BL-5B) Battery Standby time: 10 hours Internal Siren: 95d B Allowed amount of expandable wireless Accessories: 10pcs remote controls, 50pcs Wireless accessories & 50pcs RFID tags Maximum Event Logs:150 Events Radio Frequency: 433 M Hz Housing

Material: ABS Plastic Screen: LCD Screen Operation Condition: Temperature: -10 °C ~ 55 °C Humidity: ≤ 80% (non-condensing) Size (L x W x H): Panel: 185mm x 130mm x 27mm LCD Screen: 61.70mm x 14.12mm

















...

The RC80 remote control keyfob enables you to turn the alarm system on & off before entering the home or after exiting. If there is an emergency, press the SOS button the remote control to trigger the panel. Using the Part Arm button, users can alarm all zones except for Zone number one. This is also called the Home Mode. The RC80 is compact & portable; it is designed to fit on a keychain, in a pocket or in a purse.

Features: Arm, Disarm & Part Arm modes Large button design Panic SOS button for emergency use Compact & Portable Designed to fit on a key ring Battery powered Compatible with any mi Guard alarm system (A8, A9, A11, G3, G5) Transmit distance: 80m (open area) WHAT'S IN THE BOX: Remote control x 1 CR2025 battery x 1 Installation & Operating Instructions

...

The SPS260R solar-powered siren is a totally wireless siren, designed to help protect yards, driveways, gardens & all types of other external locations. The Strobe Siren is battery powered & charged by the built-in Solar Panel. The signal transmission is all by wireless radio frequency which achieves significantly wirefree transmission & enhances the flexibility to install. The strobe outdoor siren can be used as a wireless siren by connecting to the control panel as well as a standalone alarm system to work with other wireless accessories.

Features: Powered by a Solar Panel, no mains power needed Compatible with any mi Guard Alarm Panel & Sensors Easy to install, no wiring needed Weatherproof & stylish design (IP55) LED Strobe Indicator for Intruder deterrent Built-in 1pc of 3.7V/1200m Ah lithium battery enable 10-day standby Fully tamper protection Piercing 110d B siren with selectable duration (30sec./3min./5min.) Volume adjustable (High/ Low/ Mute) WHAT'S IN THE BOX: Wireless Siren x 1 3.7V Rechargeable lithium battery x 1 Fixing packs Installation & Operating Instructions

...

The SPS260B solar-powered siren is a totally wireless siren, designed to help protect yards, driveways, gardens & all types of other external locations. The Strobe Siren is battery powered & charged by the built-in Solar Panel (or optional 12V DC power). The signal transmission is all by wireless radio frequency which achieves significantly wirefree transmission & enhances the flexibility to install. The strobe outdoor siren can be used as a wireless siren by connecting to the control panel as well as a standalone alarm system to work with other wireless accessories.

Features: Powered by a Solar Panel, no mains power needed Compatible with any mi Guard alarm panels & sensors Easy to install, no wiring needed Weatherproof & stylish design (IP55) LED Strobe Indicator for Intruder Detection & deterrent Built-in 1pc of 3.7V/1200m Ah lithium battery enable 10-day standby Fully tamper protection Piercing 115d B siren with selectable duration (30sec./3min./5min.) Volume adjustable (High/ Low/ Mute) WHAT'S IN THE BOX: Wireless Siren x 1 3.7V Rechargeable lithium battery x 1 Fixing packs Installation & Operating Instructions

...

This wireless Keypad can be installed outside the entry door so users can achieve operations such as arm, disarm, stay mode after inputting a passcode. The Keypad can also be connected to an electronic door lock to work as an access control system for homes & offices. When users leave a room & the door is closed, the electronic lock will be locked automatically. Before entering the door, just input the pass code & then press the Disarm Key or use a RFID tag (purchased separately) close to the RFID reader to disarm the system.

Features: Wireless Arm & RFID tag Disarm Keypad 4 Digit user code validation enhances security LED Indication light Entry/ Exit Delay Speed SOS Dial Panic function Battery powered Compatible with any mi Guard alarm system (A8, A9, A11, G3, G5) Support for RFID cards, tags & other 125 K Hz passive transponders Transmit distance < 80m (in open area) WHAT'S IN THE BOX: Keypad x 1 AAA 1.5V LR03 Battery x 3 All Fixings & Fittings Installation & Operating Instructions

...

The Response Electronics Solar Powered Entrance Light with PIR Motion detection is a completely wirefree, quick & easy to fit security solution that both welcomes your guests & alarms potential intruders. The ultra bright entrance light has 1 Super-bright high intensity white LED giving up to 4 hours illumination on a full charge. The in-built PIR detector senses movement within a 7 metre radius to an angle of 90 degrees, providing instant illumination of the LED light upon activation.

Features: Wireless
- no mains power required Solar powered
- energy saving Up to 4 hours continuous light from a full charge in ON mode Detection range 90 degrees. Distance 7metres Time delay is 50 seconds per activation Illuminates up to 25m radius (maximum) Automatically turns on when motion detected Manual switch for On, Off or Auto Super-Bright White LED Mounting kit provided IDEAL FOR: Automatic illumination of front & rear entrance areas, side passages, pathways, steps & dark areas WHAT'S IN THE BOX: Solar Entrance Light 3 x AA batteries
- included/fitted Fixings Instruction Manual PRODUCT

Details: Amorphous silicon solar panel 125mm x 80mm, 0.5W 1 x super bright LED, 0.5W, 35 lumen Up to 300
- 50 second AUTO activations from a full charge Working ambient light 3 – 5 lux Working temperature -10c to +50c 3 x AA / HR6 1.2v 600 m Ah rechargeable batteries included Working humidity 90% RH Installation height 1.5 – 2 metres Waterproof to IP44 Overcharge & over discharge protection CE & Ro HS compliant Dimensions: (H)155mm x (D)150mm x (W)110mm INSTALLATION: A) Drill holes in the wall B) Put plastic plugs into the holes, screw screws into the plastic plugs C) Hang the light on the screws Please refer to the instruction manual for full fitting/operating instructions







...