Main cogwheel 76 teeth. Description: Original Reely spare part. Technical data: Suitable for model 1: 10 Stadium Truck Mission Rt R (235011), 1: 10 EP Monster truck Hotlander II (235012), 1: 10 EP Stadium Buggy Rockhard 4 WD RTR (235785), 1: 10 EP Monster truck Detonator Rt R (238004). Manufacturer part no: EL0761. Suitable for chassis EB-250ST, EB-250MT, EB-250TR. Intended use: Spare part. Content: 1 Units. ...

Main gear wheel 95 teeth 48 d P. Description: Original REELY spare part for maintenance & small repairing work. Technical data: Suitable for model 1: 10 Buggy Dragontail Rt R (236630), 1: 10 Monster truck Coldlander Rt R (236620). Manufacturer part no: 4895.

Material: Plastic. Specification: 95 Z / 48 d P. Content: 1 Units. Suitable for chassis BC-4Z, MTC-4Z. Intended use: Spare part.

...

Aluminium mounting stands. Highlights &

Details: Ideal for large 1:5 & 1:6 models. Sturdy design. Adjustable

...

Introducing the new, compact Reeven Arc Ziel top-down CPU cooler featuring an effective top-down design & a quiet but powerful 92mm PWM fan The Arc Ziel is Reevens new CPU cooler design & it uses one of their own high airflow 92mm PWM fans to push the air through the fins. The fins are not just flat sheets of metal on this cooler, they are shaped so as to increase the efficiency of heat removal by the passing airflow. The cooler uses three heatpipes that run in a U shape across the base of the cooler, maximising the cooling efficiency & the 6mm diameter copper heatpipes help to quickly move the heat away from the coolers base. The heatpipes go straight through the whole length of the radiator heatsink & are spaced so that they pass through the zones on the radiator which receive direct airflow from the fan. The size of the cooler would make this ideal systems using processors of 95w or less & under normal conditions the fan is practically silent. The fan is held in place by four unique easy-clips that allow the fan to be easily removed & replaced. The relatively small height of this cooler (126mm) means that it would be an ideal cooling solution for many media centre PC cases where space is often at a premium. Underneath the cooler there is a 34mm gap between the fins & the base which is just enough room to fit standard sized memory modules. Specifications
- Model Number
- RC-0903

Dimensions (including fan)
- 116.5 x 121.5 x 95mm (H x W x D) Installation Method
- Intel
- Push-pins, AMD
- Clips no motherboard removal required Compatibility
- Intel 1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Heatsink Material
- Aluminium & copper Heatsink Clearance
- 34 mm Fan Dimension
- 92 x 92 x 25mm Fan Speed
- 500
- 2500 rpm ±10% Fan Type
- 4-pin PWM Max. Air Flow
- 10
- 51 CFM Noise
- 7.8
- 32.2 d BA Weight
- 477g



















...

Introducing the new Reeven Arc Ziel top-down CPU cooler featuring an effective top-down design & a quiet but powerful 120mm PWM fan The Arc Ziel is Reevens new flagship top-flow CPU cooler design & it uses one of their own high airflow 120mm PWM fans to push the air through the fins. The fins are not just flat sheets of metal on this cooler, they are shaped so as to increase the efficiency of heat removal by the passing airflow. The cooler uses six heatpipes that run in a U shape across the base of the cooler, maximising the cooling efficiency, & the 6mm diameter copper heatpipes help to quickly move the heat away from the coolers base. The heatpipes go straight through the whole length of the radiator heatsink & are spaced so that four of them pass through the zones on the radiator which receive direct airflow from the fan. Under normal conditions even on hot running processors, the fan is practically silent & it offers just over 100 CFM if required which would be ideal for over-clocking enthusiasts. The fan is held in place by four unique easy-clips that allow the fan to be easily removed & replaced. The relatively small height of this cooler (126mm) means that it would be an ideal cooling solution for many Media Centre PC cases. Underneath the cooler the 40mm gap between the fins & the base ensures that there is ample room for all but the tallest memory modules. Specifications
- Model Number
- RC-1203

Dimensions (including fan)
- 126 x 140.5 x 131mm (H x W x D) Installation Method
- Intel & AMD, motherboard removal required Compatibility
- Intel LGA2011/1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Heatsink Material
- Aluminium & copper Heatsink Clearance
- 40 mm Fan Dimension
- 120 x 120 x 25mm Fan Speed
- 500 rpm ± 250 rpm
- 1900 rpm ±10% Fan Type
- 4-pin PWM Max. Air Flow
- 27.61
- 101 CFM Noise
- 4.3
- 35.5 d BA Weight
- 716g

















...

The Kelveros is Reevens flagship CPU cooler, offering powerful cooling performance thanks to its direct touch heatpipes & a quiet but powerful 120mm PWM fan Introducing the Kelveros, the new flagship CPU cooler from Reeven. Thanks to its direct-touch heatpipe base, unique fin stack design & a PWM controlled 120mm fan, the Kelveros achieves an optimal balance between outstanding cooling performance & quiet operation. Direct Touch Technology The base of the coolers uses direct-touch heatpipe technology (which Reeven call Heat pipe Direct Contact Solution or H.D.C.S) that allows for a more efficient copper contact between the base of the cooler & the top of the processor. The Kelveros brings this concept of direct contact cooling to the next level by further improving heat transfer. Unique Fin Structure The sixty aluminium fins form a unique (almost bat-like) shape which helps to improve the heat dissipation. They are thicker than those found on most other coolers & the top fin has the Reeven name imprinted in the centre along with capped heatpipes, all of which provide a high quality finish for the cooler. Underneath the cooler, the 37mm gap between the fins & the base ensures that there is ample room for all but the tallest memory modules. Adjustable Fan Control The Reeven Coldwing 120mm PWM fan is fitted with a simple but highly effective fan controller that is attached to a PCI bracket. For greater adjustment users can change the PWM bandwidth manually by sliding the switch on the PCI bracket between the Low & High settings. This allows the fan to be optimised for quiet operation or highest performance depending on the users preference but the PWM function is still maintained as the general feature. Specifications
- Model Number
- RC-1202

Dimensions (including fan)
- 160 x 130 x 79mm (H x W x D) Installation Method
- Intel & AMD, motherboard removal required compatibility
- Intel LGA2011/1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Heatsink Material
- Aluminium (60 fins) & copper heatpipes Heatsink Clearance
- 37 mm Fan Dimension
- 120 x 120 x 25mm Fan Speed Low Setting
- 650
- 1300 rpm ±10% Fan Speed High Setting
- 650
- 1900 rpm ±10% Airflow Low Setting
- 35
- 69 CFM Airflow High Setting
- 35
- 101 CFM Noise Low Setting
- 9.4
- 25.7 d BA Noise High Setting
- 9.4
- 34.7 d BA Fan Type
- 4-pin PWM Weight
- 935g























...

This projector is designed for use with Universal, CS & LKM magazines. You turn a small adapter lever on the slide changing arm downwards when using. Universal magazines & you turn it upwards to use CS & LKM Magazines. With the infrared autofocus system all slides are scanned by a light beam & minor sharpness deficiencies are automatically corrected in a split second. ...

With i Scan 3600 with 3600 dpi Reflecta offers this scanner as an entry model with a favourable price & easy operating with 3600 dpi. The scanner has a lot of professional features to digitalise quickly & easily all negatives & slides. Specifications: Film Type: Negatives & positives as strips (35mm) or in framed slides (5x 5 cm up to 2mm thick) Manual loading. Optical Resolution: 3600 dpi Optical Density: 3.0 Dmax Colour

Depth: 48 bit Image Sensor: Linear Colour CCD Interface: USB PC Requirements PC: Pentium III or higher with 256 MB RAM, Windows 2000, Windows XP, Vista, 7 Mac: Apple Macintosh with USB (Universal Serial Bus) port, Mac OS version 10.1.5 or higher Supplied with: Hardware: Scanner, power adapter, USB (Universal Serial Bus) cable. Operating instructions Software: Scansoftwae: Cyberview, Adobe Photoshop Elements 8.0, optional Silverfast SE

Dimensions
Height: 6.6cm
Depth: 26.8cm
Width: 16.6cm






...

The Pro Scan 7200 provides a Optical Resolution of 3600 DPI a Dynamic Rangeof 3.8 Dmax & a extreme fast Scanning time of 1 min 35 Sec for an colour scan with 3600 dpi & 48 Bit Colour Depth. The Results are finest top quality scans. The high scanning speed & the hardware based dust & scratch removal system ICE contribute the Pro Scan 7200 to a very effective working tool. Digital ICE3TM means: Digital ICETM– Hardware based Dust-and Scratch removal with infrared sensors & automatically Software correction. Digital ROCTM– Colour Restoration; Image Quality will be restored Digital GEMTM– Grain Management; minimize grain to restore the images sharpness Specifications: Film type: Negatives & positives as strips (35mm) or mounted slides (5x 5 cm, up to 3.2mm thick) Optical resolution: 3600 x 3600 dpi Scanning Speed: 1 min 35 sec at 3600 dpi & a colour depth of 24 bit (ICE not activated) Scan range: 24.3 x 36.5 mm Optical density: 3.2 Dmax Colour

Depth: 48 bit Image sensor: Linear Array Colour CCD Interface: USB (Universal Serial Bus) 2.0 Lamp: LED Dimensions: 275x 167x 80 mm (Lx Wx H) Optional Silverfast SE, Ai, Ai Studio Supplied with: Pro Scan 7200 USB (Universal Serial Bus) Cable AC Adapter, Holder for 4 Mounted Slides Holder for film strips with up to 6 pictures. User Manual Scansoftware: Cyberview X, Adobe Photoshop Elements 8.0, System requirements: PC - Pentium III or higher with 512 MB RAM, Windows 2000, Windows XP, Vista, 7 Mac - Apple Macintosh with USB (Universal Serial Bus) port & 512 MB RAM, Mac OS version 10.1.5 or higher

...

The RPS 7200 Filmscanner offers the highest resolution & simultaneously a favourable price. The scanner increases the productivity by using the batch scanning possibility. The amazing resolution of 7200x 7200 dpi & its enormous flexibility will make this scanner the first choice for demanding jobs in imaging editorial offices, photo studios, graphic studios, science institutes, but also in the home sector. Specifications: Film Type: Negatives & positives as strips (35 mm) or mounted slides (5x 5 cm, up to 3.2 mm. thick). Optical resolution: 7200 dpi. Optical Density: 3.6 Dmax. Colour

Depth: 48 bit. Image sensor: Linear Colour CCD. Interface: USB (Universal Serial Bus) 2.0. System Requirements: PC: Pentium III or higher with min 512 MB RAM, Windows 2000, Windows XP, Vista, 7. Mac: Apple Macintosh with USB (Universal Serial Bus) interface, Mac OS version 10.1.5 or higher. Supplied with: Hardware Scanner, power adapter, USB (Universal Serial Bus) cable, operating instructions. Scansoftwae: Cyberview, Adobe Photoshop Elements 8.0, optional Silverfast, Ai Studio.

...