QNAP TL-D800C 96TB 8 Bay Desktop NAS Solution Installed with 8 x 12TB Toshiba Enterprise Drives USB (Universal Serial Bus) 3.2 Gen 2 Type-C connectivity* provides up to 10 Gb/s data transfer speeds. The port can support USB (Universal Serial Bus) Type-A to Type-C connection or Thunderbolt 3 Type-C connection using different cables. Lockable hard drive trays prevent accidental drive removal. Supports SATA 6 Gb/s drives for reliable read/write performance. The TL-D800C JBOD storage enclosure means that you can back up & expand your QNAP NAS & computers (supports Windows & Mac). The TL-D800C features eight 3.5-inch SATA 6 Gb/s drive bays with USB (Universal Serial Bus) 3.2 Gen 2 (10 Gbps) Type-C connectivity to provide a fast & smooth expansion solution. ...

The TL-D800C JBOD storage enclosure means that you can back up & expand your QNAP NAS & computers (supports Windows & Mac). The TL-D800C features eight 3.5-inch SATA 6 Gb/s drive bays with USB (Universal Serial Bus) 3.2 Gen 2 (10 Gbps) Type-C connectivity to provide a fast & smooth expansion solution. Notes: 1. TL-D800C only supports devices with USB (Universal Serial Bus) 3.2 Gen 1 (or above) port. 2. QNAP recommends following the standard procedure to connect or disconnect the TL-D800C. For more information, please see the TL-D800C user manual. 3. The TL-D800C can only be used as an individual storage pool or volume on the NAS. Its storage pool/volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D800C. 4. The TL-D800C only supports QNAP NAS running on QTS 4.4.2 (or above) or Qu TS hero operating system. 5. The TL-D800C doesn’t support ASM1142 USB (Universal Serial Bus) controller IC based USB (Universal Serial Bus) ports & PCIe expansion cards (e.g. QNAP USB (Universal Serial Bus)-U31A2P01 expansion card) The TL-D800C provides software-controlled configurations for greater management flexibility. Users can configure RAID & monitor disk health using the QTS / Qu TS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on their computer. You can connect your TL-D800C to Windows, Mac, & Ubuntu computers through the USB (Universal Serial Bus) interface & use built-in utility to manage the RAID configuration. Note: 1. When the USB (Universal Serial Bus) port endpoint usage exceeds the limit, drives on the TL-D800C may not be recognized. For more information, please visit https://www.cambrionix.com/articles_support/endpoint-limitation-USB (Universal Serial Bus)-hubs/&12290; 2. Before removing a storage pool, make sure you have removed all volumes & LUNs on that storage pool to avoid unexpected disasters. 3. Please connect your TL USB (Universal Serial Bus) JBOD directly to the USB (Universal Serial Bus) port on your PC. Do not connect the TL USB (Universal Serial Bus) JBOD to the USB (Universal Serial Bus) hub. ...

The TL-D800C JBOD storage enclosure means that you can back up & expand your QNAP NAS & computers (supports Windows & Mac). The TL-D800C features eight 3.5-inch SATA 6 Gb/s drive bays with USB (Universal Serial Bus) 3.2 Gen 2 (10 Gbps) Type-C connectivity to provide a fast & smooth expansion solution. Notes: 1. TL-D800C only supports devices with USB (Universal Serial Bus) 3.2 Gen 1 (or above) port. 2. QNAP recommends following the standard procedure to connect or disconnect the TL-D800C. For more information, please see the TL-D800C user manual. 3. The TL-D800C can only be used as an individual storage pool or volume on the NAS. Its storage pool/volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D800C. 4. The TL-D800C only supports QNAP NAS running on QTS 4.4.2 (or above) or Qu TS hero operating system. 5. The TL-D800C doesn’t support ASM1142 USB (Universal Serial Bus) controller IC based USB (Universal Serial Bus) ports & PCIe expansion cards (e.g. QNAP USB (Universal Serial Bus)-U31A2P01 expansion card) The TL-D800C provides software-controlled configurations for greater management flexibility. Users can configure RAID & monitor disk health using the QTS / Qu TS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on their computer. You can connect your TL-D800C to Windows, Mac, & Ubuntu computers through the USB (Universal Serial Bus) interface & use built-in utility to manage the RAID configuration. Note: 1. When the USB (Universal Serial Bus) port endpoint usage exceeds the limit, drives on the TL-D800C may not be recognized. For more information, please visit https://www.cambrionix.com/articles_support/endpoint-limitation-USB (Universal Serial Bus)-hubs/&12290; 2. Before removing a storage pool, make sure you have removed all volumes & LUNs on that storage pool to avoid unexpected disasters. 3. Please connect your TL USB (Universal Serial Bus) JBOD directly to the USB (Universal Serial Bus) port on your PC. Do not connect the TL USB (Universal Serial Bus) JBOD to the USB (Universal Serial Bus) hub. ...

Lockable hard drive trays prevent accidental drive removal. SFF-8088 (or SFF-8644) connection cable supports four SATA 6 Gb/s channels per cable (24 Gb/s in total) & provides faster data transfer speeds than e SATA & USB (Universal Serial Bus). Easy to use. QNAP NAS & PC can both use utility software to monitor, obtain, & manage JBOD information. TL-D800S JBOD storage enclosure means that you can back up & expand your QNAP NAS, Windows & Ubuntu computers & servers. The TL-D800S features eight 3.5-inch SATA 6 Gb/s drive bays & comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage & backup tasks. ...

The rackmount TL-R1200C-RP JBOD storage enclosure means that you can back up & expand your QNAP NAS, computers (supports Windows & Mac), & servers. The TL-R1200C-RP features twelve 3.5-inch SATA 6 Gb/s drive bays with USB (Universal Serial Bus) 3.2 Gen 2 (10 Gbps) Type-C connectivity to provide a fast & smooth expansion solution. Flexible storage configuration & management The TL-R1200C-RP provides software-controlled configurations for greater management flexibility. Users can configure RAID & monitor disk health using the QTS / QTS hero Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP JBOD Manager utility on their computer. What you need to know You can connect your TL-R1200C-RP to Windows, Mac, & Ubuntu computers through the USB (Universal Serial Bus) interface & use built-in utility to manage the RAID configuration. Intelligently monitor JBOD enclosure status on PC & servers with QNAP JBOD Manager The QNAP JBOD Manager is a desktop utility for monitoring the TL-R1200C-RP on Windows & Mac computers. You can quickly obtain & view information about the JBOD status, health, fan rotation speed, & check for firmware version updates. All device events are recorded, & QNAP JBOD Manager will automatically send system alert notifications to your desktop. JBOD migration speeds up remote file transfers Migrating a large number of small files or a single large data file by network environment can be time-consuming & consume significant network bandwidth that causes decreased work efficiency. The TL-R1200C-RP supports remote file transfer. All you have to do is set up the RAID configuration & store a large number of files. Then you can move the TL-R1200C-RP to another place & connect it with the computer or NAS to experience the device’s simple plug & play feature & fast data migration. Use TL-R1200C-RP as a high-capacity disk drive reader by setting up single disk mode You can treat each disk in your TL-R1200C-RP as an individual storage space, & also use it as a removable drive. It can function like a high-capacity disk drive reader. When one of disk reaches data storage limitation, you can remove it & put it into a dry box. Then swap a different disk into the TL-R1200C-RP empty drive slot. After that, you can install the disk that reached full data capacity into the TL-R1200C-RP & connect it with a computer or NAS for direct file access. Versatile usage scenarios to meet storage expansion needs The TL-R1200C-RP meets many storage expansion requirements for the home & office. Below is a list of potential usage scenarios: Scenario 1: Expand your NAS capacity The TL-R1200C-RP provides an alternative method for users to expand their NAS storage capacity. By connecting the TL-R1200C-RP to their NAS & using the Storage & Snapshots Manager in QTS or QTS hero, users can easily configure & manage their storage expansion. The TL-R1200C-RP supports a variety of QNAP NAS storage & file management functions, allowing users to build storage pools, finding files with Qsirch, & organizing files with Qfiling. Scenario 2: External storage for your NAS You can use the TL-R1200C-RP to expand your NAS storage. You can select disks to create storage pools for expanding your NAS capacity, or you can treat each disk as an individual external storage space & use it as a removable drive for greater flexibility. Regardless of the mode you use, you can always use Storage & Snapshots Manager in QTS or QTS hero to set up & manage your TL-R1200C-RP & use hard drive S.M.A.R.T. & Notification Center to check disk status anytime & anywhere. Scenario 3: Expand the storage space of your Windows, Mac, & Ubuntu computer You can use your TL-R1200C-RP with Windows, Mac, & Ubuntu computers to expand more storage space. You can set up the RAID configuration of your TL-R1200C-RP to further secure data protection. Moreover, you can also use the single disk mode & format with the ex FAT file system for more convenient access & sharing of files between Windows & Ubuntu computers. High-speed USB (Universal Serial Bus) transfer TThe TL-R1200C-RP features high-speed USB (Universal Serial Bus) 3.2 Gen 2 Type-C connectivity & built-in USB (Universal Serial Bus) Attached SCSI Protocol (UASP) to provide convenient fast file sharing & intensive data transfer. The TL-R1200C-RP not only provides you higher file transfer performance than traditional USB (Universal Serial Bus) interfaces but offers a more cost-effective option than REXP SAS JBOD. ...

Expand the storage space of a QTS/ Qu TS hero NAS, supports up to 3.4PB raw capacity by daisy-chaining up to 16 expansion enclosures. Combine multiple 6 Gb/s transmissions into 12 Gb/s data streams to achieve faster speed with existing 6 Gb/s infrastructure. Ensure smooth data transmission & continuous operation by using the TL-R1220 Sep-RP with a NAS that supports multipath routing. Manage the storage space & settings of the TL-R1220 Sep-RP with Storage & Snapshot Manager on the host NAS. Conserve network bandwidth & performance by using the TL-R1220 Sep-RP to transfer huge files from one device to another. With a short-depth design, the TL-R1220 Sep-RP is suitable for universal deployment. The TL-R1220 Sep-RP SAS 12 Gb/s storage expansion enclosure is designed for expanding the storage space of your QTS or Qu TS hero NAS. Up to sixteen expansion enclosures can be daisy-chained via high-speed mini SAS HD cables to support up to 3.4PB raw capacity, ideal for archiving/backing up virtualization applications, surveillance recordings, large data, or multimedia. Featuring Broadcom SAS Data Bolt™ bandwidth optimization technology, the TL-R1220 Sep-RP consolidates 6 Gb/s infrastructure into 12 Gb/s. When connected to a QTS/ Qu TS hero NAS that supports multipath routing, the TL-R1220 Sep-RP can achieve smoother data transmission & continuous system operation. ...

Expand the storage space of a QTS/ Qu TS hero NAS, supports up to 4.6PB raw capacity by daisy-chaining up to 16 expansion enclosures. Combine multiple 6 Gb/s transmissions into 12 Gb/s data streams to achieve faster speed with existing 6 Gb/s infrastructure. Ensure smooth data transmission & continuous operation by using the TL-R1620 Sep-RP with a NAS that supports multipath routing. Manage the storage space & settings of the TL-R1620 Sep-RP with Storage & Snapshot Manager on the host NAS. Conserve network bandwidth & performance by using the TL-R1620 Sep-RP to transfer huge files from one device to another. With a short-depth design, the TL-R1620 Sep-RP is suitable for universal deployment. The TL-R1620 Sep-RP SAS 12 Gb/s storage expansion enclosure is designed for expanding the storage space of your QTS or Qu TS hero NAS. Up to sixteen expansion enclosures can be daisy-chained via high-speed mini SAS HD cables to support up to 4.6PB raw capacity, ideal for archiving/backing up virtualization applications, surveillance recordings, large data, or multimedia. Featuring Broadcom SAS Data Bolt™ bandwidth optimization technology, the TL-R1620 Sep-RP consolidates 6 Gb/s infrastructure into 12 Gb/s. When connected to a QTS/ Qu TS hero NAS that supports multipath routing, the TL-R1620 Sep-RP can achieve smoother data transmission & continuous system operation. ...

TL-R400S Rackmount JBOD storage enclosure means that you can back up & expand your QNAP NAS, Windows & Ubuntu computers & servers. The TL-R400S features four 3.5-inch SATA 6 Gb/s drive bays, the shallow rack design is perfect for installing the TL-R400S in a compact rack, or in areas with a lot of cabling. High performance of TL SATA JBOD The TL SATA JBOD supports multi-lane SATA 6 Gb/s transfer, and each SATA lane directly connects to a single SATA drive to help improve performance. With the 1-1 high-speed channel, the TL SATA JBOD delivers excellent transfer performance. Flexible storage configuration & management The TL-R400S provides software-controlled storage configuration for greater management flexibility. You can configure RAID & monitor JBOD enclosure & disk health with Storage & Snapshots when connected to a QTS or QTS hero NAS. Use the Storage & Snapshots Manager in QTS or QTS hero to configure the TL-R400S as a storage enclosure for your QNAP NAS. The NAS expansion storage mode supports various NAS functions, including storage pools & snapshots. With TL-R400S, you can easily expand storage capacity. The QNAP JBOD Manager is a desktop utility for monitoring the TL-R400S on Windows & Ubuntu computers. You can quickly obtain disk statuses, JBOD information & health, view fan-rotation speed, and check for firmware version updates. Versatile usage scenarios to meet storage expansion needs The TL-R400S meets many storage expansion requirements for the home & office. TL-R400S offers better performance than other USB (Universal Serial Bus) & e SATA JBOD solutions The TL-R400S features SFF-8088 (or SFF-8644) connectivity & multiple SATA 6 Gb/s bays. This provides better sequential read performance & faster data-transfer speeds than existing USB (Universal Serial Bus) & e SATA expansion enclosures, while also being a more economical option compared to a QNAP REXP SAS enclosure. Expand your NAS capacity The TL-R400S provides an alternative method for users to expand their NAS storage capacity. By connecting the TL-R400S to their NAS & using Storage & Snapshots Manager in QTS or QTS hero, users can easily configure & manage their storage expansion. The TL-R400S supports a variety of QNAP NAS storage & file-management functions, allowing users to build storage pools, finding files with Qsirch, and organizing files with Qfiling. External storage for your NAS You can use the TL-R400S to expand your NAS storage. You can select disks to create storage pools for expanding your NAS capacity, or you can treat each disk as an individual external storage space & use it as a removable drive for greater flexibility. Regardless of the mode you use, you can always use Storage & Snapshots Manager in QTS or QTS hero to set up & manage your TL-R400S & use hard drive S.M.A.R.T. & Notification Center to check disk status anytime & anywhere. Expand the storage space of your Windows & Ubuntu computers & servers You can use your TL-R400S with Windows & Ubuntu computers & servers to expand more storage space. You can set up the RAID configuration of your TL-R400S to further secure data protection. Moreover, you can also use the single-disk mode & format with ex FAT file system for more convenient access & sharing of files between Windows & Ubuntu computers. You can obtain data protection by building a software RAID 0, RAID 1, and RAID 5 volume with native utility in your Windows & Ubuntu computers, and use the QNAP JBOD Manager to monitor the TL-R400S status information. ...

QNAP TL-R400S 48TB 4 Bay NAS Rackmount Solution Installed with 4 x 12TB Toshiba Enterprise Drives High-capacity TL SATA JBOD not only can expand NAS storage, but also Windows & Ubuntu computers & servers. SFF-8088 (or SFF-8644) connection cable supports four SATA 6 Gb/s channels per cable (24 Gb/s in total) & provides faster data transfer speeds than e SATA & USB (Universal Serial Bus). The short depth rackmount NAS is perfectly suited for installation in a compact rack, or places with a lot of cabling. TL-R400S Rackmount JBOD storage enclosure means that you can back up & expand your QNAP NAS, Windows & Ubuntu computers & servers. The TL-R400S features four 3.5-inch SATA 6 Gb/s drive bays, the shallow rack design is perfect for installing the TL-R400S in a compact rack, or in areas with a lot of cabling. TL-R400S comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage & backup tasks. ...

The TR-002 USB (Universal Serial Bus) 3.1 Gen. 2 RAID expansion enclosure means that you can expand the capacity of your QNAP NAS & PC. The TR-002 can also be utilized as a DAS (Direct-attached Storage) device, allowing you to directly access its content just by connecting it via USB (Universal Serial Bus). The TR-002 features two 3.5-inch SATA drive bays with USB (Universal Serial Bus) 3.1 Gen. 2 Type-C connectivity to bring you a highly-reliable & secure storage capacity expansion solution. Effective storage expansion with RAID Support The TR-002 is an ideal storage expansion solution for PCs, especially for laptops which lack the ability to install higher-capacity drives. Featuring two 3.5-inch SATA drive bays & supporting RAID configuration, the TR-002 provides the ability to store a vast number of files & data & to ensure protection against potential drive failure. Supports various RAID levels The TR-002 supports various RAID configurations. Depending on your requirements, you can switch between hardware- or software-controlled RAID modes. Move the DIP switches to corresponding positions for your ideal RAID mode: Individual, JBOD, RAID 0 or RAID 1. You can also configure the RAID settings from your QNAP NAS, or by using the QNAP External RAID Manager utility on your computer. ...