This 10 Gb E SFP+ network cable is designed for NAS models with an integrated 10 Gb E SFP+ LAN port or a 10 Gb E SFP+ network card. ...

QM2 series PCIe cards add support for M.2 SSDs & 10 Gb E RJ45 connectivity to a QNAP NAS. Combining M.2 SSD & 10 Gb E connectivity into one solution, the QM2 helps improve overall NAS performance while providing an affordable upgrade path for adopting 10 Gb E networks. Tackle performance bottlenecks QM2 boosts performance by adding M.2 SSDs. It doesn’t occupy any 3.5-inch drive bays, allowing you to maximize both your storage capacity & performance. M.2 SSDs* can be installed to form caching pools or an auto-tiering volume. Enables SSD caching to boost performance & optimizes storage efficiency with Qtier Technology**. Provides 10GBASE-T connectivity & backwards compatibility with 5 Gb E/2.5 Gb E/1 Gb E/100 Mb E. M.2 SSD thermal sensors allow real-time M.2 SSD temperature monitoring. A quiet cooling module (heatsink & smart fan) minimizes overheating risks & sustains constant high performance. LED indicators for monitoring M.2 SSD status. Specifications Dual M.2 2280 SATA SSD & single-port 10 Gb E expansion card Connector: 2 x M.2 2280 SATA SSD slots; 1x 10GBASE-T port PCIe & Lanes: PCIe Gen 2 x 4 Transmission rates: 10G/5G/2.5G/1G/100M Controller: Aquantia AQC107 Bracket: Low-profile (default). Low-profile flat & Full-height brackets are also included.

Dimensions (L x W x H): 157 x 68.9 x 20.6 mm; 6.18 x 2.71 x 0.81 inch Cable: RJ-45; over CAT-6 class cable Note: The TS-x 77 & TVS-x 82 (T) series only supports installing the QM2 in the System Zone PCIe slot (PCIe slot 1).

...

Model:LAN-10G2T-D Category: Network Expansion Card Description: QNAP Dual-port 10 Gigabit Network Expansion Card for Tower Model (10GBASE-T interface) Dimension: 260 x 150 x 58 mm (10.2 x 5.9 x 2.3 inch) Weight: 0.41kg (0.9lb) Applied Model: TS-879 Pro, TS-1079 Pro, TS-470 Pro, TS-670 Pro, TS-870 Pro, TS-470, TS-670, TS-870 Product Features Total Number of Ports: 2 Network (RJ-45): Yes Number of Network (RJ-45) Ports: 2 Media Type Supported: Twisted Pair Network Technology: 10 G Base-T Form Factor: Plug-in Card Device Supported: NAS Storage Device ...

QNAP dual-port 10 Gbase-T network expansion card for TS-EC880- TS-EC1080- TS-470- TS-670- TS-870- TVS-ECx 80- TVS-x 71- TVS-x 63- TS-563- TS-463U- TS-463U-RP- TVS-871T- TVS-471U- TVS-471U-RP- TVS-x 70- TVS-X82- TVS-X82T- TES-1885U-TDS-16489U. ...

Model:LAN-1G2T-U Category: Network Expansion Card Description: QNAP Dual-port Gigabit Network Expansion Card for TS-x 70 & TS-x 79 Rackmount Model Dimension: 195 x 120 x 32 mm (7.7 x 4.7 x 7.1.3 inch) Weight: 0.2kg (0.44lb) Applied Model: TS-870U-RP/879U-RP/EC879U-RP/1270U-RP/1279U-RP/EC1279U-RP/1679U-RP/EC1679U-RP Key Features Device Type
- Network adapter Form Factor
- Plug-in card Data Transfer Rate
- 1 Gbps Ports Qty
- 2 ports Cabling Type
- Ethernet 1000 Base-T




...

Intel Xeon D dual active-active controllers provide supreme uptime & redundancy to ensure high availability. Battery-protected DRAM write to cache data protection & Flash read acceleration provides industry-leading random access performance. Two M.2 SSD slots allow for implementing SSD cache acceleration. Four 10 Gb E SFP+ ports accelerate virtualization, large file sharing, & intensive data transfer. Near-limitless snapshots & Snap Sync for snapshot remote backup assist businesses to resume essential services in the shortest time. Supports VMware v Sphere 6.5, Windows Server 2016 & Citrix Xen Server 7.0 for storage virtualization. Compatible with Open Stack cloud environments. Delivering enterprise high availability, the ES1686dc Enterprise ZFS NAS features Intel Xeon D processors, dual active controllers, up to 512 GB DDR4 ECC memory, SAS 12 Gb/s, & ZFS that supports logical volume management. The ES1686dc runs the latest QES 2.1.0 operating system that supports near-limitless snapshots, Snap Sync, block-level data deduplication, & inline data compression. Whether being used as a mission-critical file server, virtualization server, VDI, medium-sized data center, video streaming, surveillance storage, & efficient file backup & recovery, the ES1686dc helps your business to achieve service-level agreements for performance & uptime. ...

The 256GB (2 x 128GB) m SATA Flash Cache Module from Qnap is used with the TS-EC880U-RP, TS-EC1280U-RP, TS-EC2480U-RP, TS-EC1680U-RP, TS-EC880 Pro, & TS-EC1080 Pro NAS Systems. By installing this m SATA cache module, the IOPS performance of storage volumes can be remarkably boosted. It helps improve the overall workflow of random IOPS demanding applications such as database & virtualization. Designed For QNAP TS-EC1080 Pro Turbo NAS, TS-EC1280U-RP, TS-EC1680U-RP, TS-EC2480U-RP, TS-EC880 Pro Turbo NAS, TS-EC880U-RP ...

QGD-1600P is compliant with the latest IEEE 802.3bt Po E++ & IEEE 802.3at Po E+ standards, & offers 4-port 60-watt & 12-port 30-watt Gigabit Po E capability. QGD-1600P can supply a total power budget of 370 watts to meet the demands of high-powered devices (PDs). QGD-1600P provides comprehensive Layer 2 management features, such as VLAN, LACP, Qo S IGMP Snooping, & Wake-on-LAN for IT administrators to efficiently control the network bandwidth & enhance security via the user-friendly switch management web interface. Qu Net Switch offers a user-friendly web interface to help IT administrators efficiently control Layer 2 & Po E networks. in addition, the overview dashboard & graphical statistics analysis show IT administrators all switch information & pored devices at a glance, making central management of high-power devices intuitive & easy. Supports up to two SATA drives. PCIe expandability allows for 10 Gb E network cards, QM2 dual-port M.2 SSD/10 Gb E cards, USB (Universal Serial Bus) 3.1 Gen 2 (10 Gbps) cards, or Wireless Adapters. Host containerized applications & virtual machines with various operating systems. Flexibly install virtual router, firewall, or wireless LAN management software for various networking management applications. QNAP’s QGD-1600P is the world’s first Po E managed switch that supports Virtual Machines (VMs). It features 4-port 60-watt & 12-port 30-watt Gigabit Po E (with two Po E/SFP Combo ports) for highly flexible networking environment deployment. With a dual-CPU design, the QGD-1600P provides both Layer 2 management functions for VM & QTS applications. The QGD-1600P also features Software-Defined Networking (SDN), enabling it to function as a NAS, NVR, router, firewall & AP controller for IP surveillance, network security, storage expansion, & wireless LAN management applications. Therefore, the Guardian series offers SMBs a cost-optimized & centrally managed LAN deployment solution. Specifications Management Type Web Managed CPU Intel Celeron J4115 quad-core 1.8 GHz processor (burst up to 2.5 GHz) CPU Architecture 64-bit x 86 Drive Bays 2 x 2.5-inch SATA 6 Gb/s, 3 Gb/s Rate Limiting Yes IGMP Snooping Querier Yes IGMP Snooping v 2/v 3 Yes IP-based Access Control List (ACL) Yes DSCP-based Qo S Yes Port-based Qo S Yes VLAN-based Qo S Yes Port Mirroring Yes Trunking/LACP Yes IEEE 802.1Q-based VLAN Yes Port-based Private VLAN Yes VLAN Configuration Yes Po E Detection Yes Po E Schedule Yes Po E Status Yes LLDP Yes MAC Address Table Display Yes Loop Protection Yes Flash Memory 4GB (Dual boot OS protection) File System: External Hard Drive EXT3, EXT4, NTFS, FAT32, HFS+, ex FAT (optional license) File System: Internal Hard Drive EXT4 SSD Cache Acceleration Support Yes M.2 SSD Slots Optional via PCIe adapter Hot-swappable Yes Drive Compatibility 2.5-inch bays: 2.5-inch solid-state drives 2.5-inch hard disk drives Memory Slot 2 x SODIMM DDR4 SNTP/DNS/DHCP Client Yes Maximum Memory 8 GB (2 x 4 GB) Encryption Engine (AES-NI) Floating Point Unit Yes Graphics Processors Intel HD Graphics 600 QTS Built-in Yes Static MAC Address Yes IEEE 802.3x Flow Control Yes Auto-negotiation of Speed & Duplex Modes Yes Port Configuration Yes Number of Ports 16 USB (Universal Serial Bus) 3.0 port 1 Input Power Type AC Max. Power Consumption 418W Power Supply Description Internal Power Supply Unit HDMI Output 1 USB (Universal Serial Bus) 3.1 Gen 2 (10 Gbps) Port Optional via PCIe adapter Management Port 1 USB (Universal Serial Bus) 2.0 port 2 PCIe Slot Slot 1: PCIe Gen 2 (x 2) Slot 2: PCIe Gen 2 (x 2) MAC Address Table 8K Total Po E Power Budget 370W Po E Power Output Ports 1-4 (60W), Ports 5-16 (30W) Po E++ PSE (802.3bt, 60W) Ports 1-4 Po E+ PSE (802.3at, 30W) Ports 1-16 Po E PSE (802.3af, 15.4W) Ports 1-16 Total Po E Ports 16 1 Gb E SFP/RJ45 Combo Ports 2 1 Gb E (RJ45) 14 Input Voltage Range 100-240VAC, 50/60 Hz Total Non-Blocking Throughput 16 Gbps Port Statistics Yes Weight (Net) 4.41kg Port Status Yes Jumbo Frames 9k Electromagnetic Compliance CLASS A, UL62368 Certifications CE, FCC, VCCI, BSMI RCM Relative Humidity 5% to 95% non-condensing, wet bulb: 27&730;C (80.6&730;F) Operating Temperature 0°C to 45°C (32°F to 113°F) Weight (Gross) 5.56kg

Dimensions (Hx Wx D) 160 x 528 x 403 mm Switching Capacity 32 Gbps Buttons Device PSU power button Host power button Host reset button (load default) Switch reset button LCD Management Yes LED Indicators Per Port: Link/ Activity/ Speed/ Po E Per System: Warning/ Po E/ Fan Form Factor Rackmount Supported Standards IEEE 802.3 10 Tx Ethernet IEEE 802.3u 100 Tx Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z 1000 Base-X IEEE 802.3x Full-duplex flow control IEEE 802.3af/at/bt Power-over-Ethernet (Po E) IEEE 802.1q Virtual LANs (VLAN) IEEE 802.1p Qo S Protocol for Traffic Prioritization Fan System: 2 x 4 cm (12V DC) Energy Efficient Ethernet (IEEE 802.3az complaint) Yes Management Interface CLI/ Web Warranty 2 Years * Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the"ed unit price unless otherwise stated.

...

QGD-1600P is compliant with the latest IEEE 802.3bt Po E++ & IEEE 802.3at Po E+ standards, & offers 4-port 60-watt & 12-port 30-watt Gigabit Po E capability. QGD-1600P can supply a total power budget of 370 watts to meet the demands of high-powered devices (PDs). QGD-1600P provides comprehensive Layer 2 management features, such as VLAN, LACP, Qo S IGMP Snooping, & Wake-on-LAN for IT administrators to efficiently control the network bandwidth & enhance security via the user-friendly switch management web interface. Qu Net Switch offers a user-friendly web interface to help IT administrators efficiently control Layer 2 & Po E networks. in addition, the overview dashboard & graphical statistics analysis show IT administrators all switch information & pored devices at a glance, making central management of high-power devices intuitive & easy. Supports up to two SATA drives. PCIe expandability allows for 10 Gb E network cards, QM2 dual-port M.2 SSD/10 Gb E cards, USB (Universal Serial Bus) 3.1 Gen 2 (10 Gbps) cards, or Wireless Adapters. Host containerized applications & virtual machines with various operating systems. Flexibly install virtual router, firewall, or wireless LAN management software for various networking management applications. QNAP’s QGD-1600P is the world’s first Po E managed switch that supports Virtual Machines (VMs). It features 4-port 60-watt & 12-port 30-watt Gigabit Po E (with two Po E/SFP Combo ports) for highly flexible networking environment deployment. With a dual-CPU design, the QGD-1600P provides both Layer 2 management functions for VM & QTS applications. The QGD-1600P also features Software-Defined Networking (SDN), enabling it to function as a NAS, NVR, router, firewall & AP controller for IP surveillance, network security, storage expansion, & wireless LAN management applications. Therefore, the Guardian series offers SMBs a cost-optimized & centrally managed LAN deployment solution. Specifications Management Type Web Managed CPU Intel Celeron J4115 quad-core 1.8 GHz processor (burst up to 2.5 GHz) CPU Architecture 64-bit x 86 Drive Bays 2 x 2.5-inch SATA 6 Gb/s, 3 Gb/s Rate Limiting Yes IGMP Snooping Querier Yes IGMP Snooping v 2/v 3 Yes IP-based Access Control List (ACL) Yes DSCP-based Qo S Yes Port-based Qo S Yes VLAN-based Qo S Yes Port Mirroring Yes Trunking/LACP Yes IEEE 802.1Q-based VLAN Yes Port-based Private VLAN Yes VLAN Configuration Yes Po E Detection Yes Po E Schedule Yes Po E Status Yes LLDP Yes MAC Address Table Display Yes Loop Protection Yes Flash Memory 4GB (Dual boot OS protection) File System: External Hard Drive EXT3, EXT4, NTFS, FAT32, HFS+, ex FAT (optional license) File System: Internal Hard Drive EXT4 SSD Cache Acceleration Support Yes M.2 SSD Slots Optional via PCIe adapter Hot-swappable Yes Drive Compatibility 2.5-inch bays: 2.5-inch solid-state drives 2.5-inch hard disk drives Memory Slot 2 x SODIMM DDR4 SNTP/DNS/DHCP Client Yes Maximum Memory 8 GB (2 x 4 GB) Encryption Engine (AES-NI) Floating Point Unit Yes Graphics Processors Intel HD Graphics 600 QTS Built-in Yes Static MAC Address Yes IEEE 802.3x Flow Control Yes Auto-negotiation of Speed & Duplex Modes Yes Port Configuration Yes Number of Ports 16 USB (Universal Serial Bus) 3.0 port 1 Input Power Type AC Max. Power Consumption 418W Power Supply Description Internal Power Supply Unit HDMI Output 1 USB (Universal Serial Bus) 3.1 Gen 2 (10 Gbps) Port Optional via PCIe adapter Management Port 1 USB (Universal Serial Bus) 2.0 port 2 PCIe Slot Slot 1: PCIe Gen 2 (x 2) Slot 2: PCIe Gen 2 (x 2) MAC Address Table 8K Total Po E Power Budget 370W Po E Power Output Ports 1-4 (60W), Ports 5-16 (30W) Po E++ PSE (802.3bt, 60W) Ports 1-4 Po E+ PSE (802.3at, 30W) Ports 1-16 Po E PSE (802.3af, 15.4W) Ports 1-16 Total Po E Ports 16 1 Gb E SFP/RJ45 Combo Ports 2 1 Gb E (RJ45) 14 Input Voltage Range 100-240VAC, 50/60 Hz Total Non-Blocking Throughput 16 Gbps Port Statistics Yes Weight (Net) 4.41kg Port Status Yes Jumbo Frames 9k Electromagnetic Compliance CLASS A, UL62368 Certifications CE, FCC, VCCI, BSMI RCM Relative Humidity 5% to 95% non-condensing, wet bulb: 27&730;C (80.6&730;F) Operating Temperature 0°C to 45°C (32°F to 113°F) Weight (Gross) 5.56kg

Dimensions (Hx Wx D) 160 x 528 x 403 mm Switching Capacity 32 Gbps Buttons Device PSU power button Host power button Host reset button (load default) Switch reset button LCD Management Yes LED Indicators Per Port: Link/ Activity/ Speed/ Po E Per System: Warning/ Po E/ Fan Form Factor Rackmount Supported Standards IEEE 802.3 10 Tx Ethernet IEEE 802.3u 100 Tx Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z 1000 Base-X IEEE 802.3x Full-duplex flow control IEEE 802.3af/at/bt Power-over-Ethernet (Po E) IEEE 802.1q Virtual LANs (VLAN) IEEE 802.1p Qo S Protocol for Traffic Prioritization Fan System: 2 x 4 cm (12V DC) Energy Efficient Ethernet (IEEE 802.3az complaint) Yes Management Interface CLI/ Web Warranty 2 Years * Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the"ed unit price unless otherwise stated.

...

QNAP-OCE11102-NX High-performance 10 Gigabit Ethernet Network Adapter Key Features Superior performance Energy-efficient design One platform for network & Storage Connection Easy to deploy & manage with One Command Manager Application Optimized for network consolidation The OCe 11102-N is a high-performance, dual-port network adapter for 10 Gigabit Ethernet (10 Gb E) networks. Protocol offload for stateless TCP/IP & TCP Chimney provide maximum bandwidth with minimum use of CPU resources. Emulex One Connect Universal CNA platform The OCe 11102-N is a member of the Emulex One Connect Universal Converged Network Adapter (UCNA) Platform that also

Includes:: support for Fibre Channel over Ethernet (FCo E) & i SCSI protocol offloads. By using a common infrastructure for Ethernet & storage networks, data centers can reduce capital expense (Cap Ex) for adapters, switches & cables, & operational expense (Op Ex) for power, cooling & IT administration. Greener data centers The Emulex One Connect UCNA platform delivers industry-leading performance & scalability per watt, reducing requirements for power & cooling. Protocol offload enables efficient use of computing resources, supports more virtual machine (VMs) per CPU, & reduces the number of servers required to support data center demands. Advanced error checking End-to-end data protection with hardware parity, CRC, ECC & other advanced error checking & correcting ensure that data is safe from corruption. Virtualized I/O New multi-core servers are enabling much higher virtualization ratios. One Connect adapters support Net Queue for VMware & Virtual Machine Queue (VMQ) for Microsoft Windows Server 2008 Hyper-V to optimize performance & provide full 10b/s bandwidth per port.

...