This protective rubber boot provides additional protection from mild impacts to the wearable terminal. ...

This brand new model is slim & compact. Especially suitable for use in the bathroom. 400 Watt power. Wall mounted with built in thermostat. There is also a built in safety cut off system in the case of overheating. Wall-Mounted Bathroom Panel Heater Suitable for room

Size: 3-6 Square metres. Mechanical switch. Thermostat Frost protection IPX4. Safety cut off overheat protection. Suitable for humid area.

Dimensions W x D x H: 350 mm. x 100 mm. x 290 mm. Weight Kg: 1.8 12 month warranty.



...

For grinding surfaces in very tight spots, e.g. corners, sides & inaccessible areas. The oscillating motion ensures quiet operation & also facilitates cutting. Insert & file! The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy. Main housing of glass-fibre reinforced POLYAMIDE. Complete with 4 sanding discs (2x 80 grit, 1x 150 grit & 1x 240 grit). In an attractive case, as described on the right. ...

Proxxon Micromot KT 150 Die-Cast Aaluminium Compound Table. Highlights & details. 1 rotation = 2 mm. Feed rate. 1 rotation = 0.05 mm. Feed rate. Description. For grooving & milling of machining steel, nonferrous metal, plastic & wood. made from high strength aluminium die-cast parts. Features. Precisely machined dovetail rails. Each rail has locking device. Rails can be easily readjusted. Limit stop with pre-specified fit (even for 45°). 2 hand wheels with adjustable O-position. Working surface with milled design. 3 piercing T-nuts for fastening machine bench vices & clamping show. Stop with specified fit, mounting screws & clamps. Technical data. Working surface: 200 x 200 mm. Hub maximum: 150 x 150 mm. 7.5 cm. height. Type KT 150. Weight: 4.9 kg. ...

Proxxon Micromot BSG 220 Drill Sharpener. Highlights & details. For easy cleaning of spiral drill bits up to 13 mm. diameter. Corundum grinding disc size 50 x 13 mm. Description. The sharpening itself takes place in the prism by turning the arm of the Proxxon Micromot BSG 220 Drill Sharpener. The turning motion does not only move the prism back & forth but also on its own axis at the same time. This automatically provides the necessary relief. Adjustable spindle with quick axial adjustment. The stone is cleaned by pushing a button. Easy sharpening of drill bits from 3 to 13 mm. diameter, standard angle of 118°. Features. Suitable for sharpening HSS, E-HSS, Cr V or WS spiral drill bits. standard angle 118 degrees. ABS casing, with screw holes to fit to bench. super quiet motor. Grinding discs from white corundum. Included in delivery. Replacement discs. Technical data. &732; 3
- 13 mm., drill bit length approx. 55
- 170 mm. Disc 50 x 13 mm., with 12.7 mm. bore. Operating voltage 230 V/50 Hz. Power 85 W. Rotational speed range 8000 rpm. Weight 1, 7 kg.

...

Proxxon Micromot 24260 Precision Steel Vice. Highlights & details. Milled steel construction. Completely angular. Jaw width 46 mm. clamping capacity 34 mm. Description. The Proxxon Micromot 24260 Precision Steel Vice is especially suited for filigree & accurate working with the MICRO miller MF 70 (812193) or the compound table KT 70 (823846). Sliding blocks & fixing screws included. Comes in a wooden box. Features. Milled steel construction. Included in delivery. Wooden box. Sliding blocks. Fixing screws. Vice only
- Machine not included! Technical data. Span (clamping jaws) 30 mm. Jaw

Width: 46 mm. Length: 70 mm.


...

Proxxon Micromot 50 Multitool. Highlights & details. No-load speed 20000 rpm. Direct voltage 12
- 18 V. Power consumption is 40
...

Proxxon Micromot 50 Mill/ Drill. Highlights &

Details: Electronic speed control. Stable housing of glass-fibre

...

Proxxon Micromot 50/E Drill/ Grinder Set with Power Supply. Highlights &

Details: Slim, easily handled

...

Proxxon Micromot BFB 2000 Mill/ Drill Unit. Highlights & details. Milled, adjustable dovetail slide. Clear, easily legible depth scale. 45 mm. Diameter: column, 500 mm. long. Adjustable zero position for fine feed. Selectable fine feed with lever. Stable, machined work top with T-slots. Description. Head with precision milled dovetail slide & may be tilted through 90° to give all-round versatility: diagonal drilling, versatile without need of special milling bits, milling diagonal slots. Fine feed selectable, allowing fine head feed for milling. With dial & depth scale. Geared rack & pinion feed for effortless drilling. 45 mm. Diameter: drill column, 500 mm. long. Approx. 140 mm. throat (column outside to tool centre). 65 mm. stroke. Machined, solid base plate approx. 200 x 200 mm. All drills with standard 43 mm. spindle collars may be utilised directly: BOSCH, AEG, FEIN, METABO, KRESS, BLACK & DECKER, SKIL. Weight: approx. 6.5 kg.

Features: Jib-head can be swivelled up to 90°, giving versatile usage possibilities: diagonal drilling, versatile milling without special miller, milling of diagonally elongated holes. Can be switched to fine feed for adjusting the head milling. Depth stop. Depth scale. Strongly reduced gear-rack feed for drilling without applying a lot of force. Without additional parts all drill machines can be used with 43 mm. spindle neck: BOSCH, AEG, FEIN, METABO, KRESS, BLACK + DECKER, SKIL. Re-adjustable, milled dovetail design. Adjustable 0-setting for fine feed. Stable, plain-milled work table with T-grooves. With scale marking. Horizontal use e.g. for slitting cutter. Technical data: Drill column-dia. 45 mm. Drill column-L 500 mm. 200 x 200 mm. Cantilever 140 mm. Hub 65 mm.

...