Optimize the cooling performance with 5 fans. Maximizes the air flow keeping the HDD & the system cool. Supports bottom PSU installation for effective cooling of PSU, & also helps to stabilize the case. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Dust filters on the bottom prevents dust entering. luxurious interior with black coating finishing touch. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Supports HDD Hot Swap bay for easy installation even during the operation Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment Without the side guide 360mm high performance VGA card can be installed. Edges are molded nicely to prevent had cutting injuries during installation. Extra 2.5 HDD or SSD installation space provided at the bottom. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case.

Specification Model Z3 Plus Case Type ATX Mid Tower Dimensions 192 (W)x 465 (H)x 430 (D)mm Weight 6kg (13.22lb) Material Plastic, Steel Color Black Motherboard Compatibility Standard ATX / Micro ATX Power Supply Compatibility Standard ATX / ATX12V PCI/AGP Card Compatiblility Full Size 360mm (14.1inch) Drive Bays 5.25" External Bay x 2 3.5" Internal Bay x 4 Cooling Component (Fans) Top 120mm Fan Vent x 2 (2 Fan included) Rear 120mm Fan Vent x 1 (1 Fan included) Front 120mm Fan x 2 (1 LED Fan included) Fan Controller Simultaneously Control 2 Acrylic Side Yes VGA Guide Yes I/O Ports Headphone x 1, MIC x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 X 1 Expansion Card Slots 7 Slots

...

Optimize the cooling performance with 5 fans. Maximizes the air flow keeping the HDD & the system cool. Supports bottom PSU installation for effective cooling of PSU, & also helps to stabilize the case. USB (Universal Serial Bus) ports, audio socket, power & reset buttons set on the front for user convenience. Dust filters on the bottom prevents dust entering. luxurious interior with black coating finishing touch. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Supports HDD Hot Swap bay for easy installation even during the operation Anti-vibration Rubbers on the bottom of the case & the PSU installation area offer the vibrations free Quiet PC Environment Without the side guide 360mm high performance VGA card can be installed. Edges are molded nicely to prevent had cutting injuries during installation. Extra 2.5 HDD or SSD installation space provided at the bottom. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case.

Specification Model Z3 Plus white Case Type ATX Mid Tower Dimensions 192 (W)x 465 (H)x 430 (D)mm Weight 6kg (13.22lb) Material Plastic, Steel Color White Motherboard Compatibility Standard ATX / Micro ATX Power Supply Compatibility Standard ATX / ATX12V PCI/AGP Card Compatiblility Full Size 360mm (14.1inch) Drive Bays 5.25" External Bay x 2 3.5" Internal Bay x 4 Cooling Component (Fans) Top 120mm Fan Vent x 2 (2 Fan included) Rear 120mm Fan Vent x 1 (1 Fan included) Front 120mm Fan x 2 (1 LED Fan included) Fan Controller Simultaneously Control 2 Acrylic Side Yes VGA Guide Yes I/O Ports Headphone x 1, MIC x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 X 1 Expansion Card Slots 7 Slots

...

With Zalman Cooling Solution Up to 5 System Fans Up to 5 fans can be mounted with standard-equipped 120 front LED fan & back 120 fan. Bottom PSU Installation Supports bottom PSU installation for effective cooling of PSU & inner space of case. Power Cooling Aerodynamically designed front/top vents provide cool air into the system. Black Coating luxurious interior with black coating finishing touch. Convenient Top Interface USB (Universal Serial Bus) ports, audio socket, power & rest buttons set on the top for user convenience. Connect to Smartphone& External Hard Drive Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Tube Apertures for Liquid Cooling Systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Bottom Dust Filter Dust filters on the bottom side prevent dust from entering. High Quality VGA Card Without the side guide 330 &381;œ high performance VGA card can be installed. Safe Edge Molding Safe edge molding for safer installing environment. Tool Free HDDInstallation Easily install HDD without any tool. Anti-vibration & Sound Absorption Rubber Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. Spacious interior Provides spacious interior with 7 PCI extension slots. 2 in 1 Bracket 2 in 1 Adapter Tray is provided for installing FDD / 3.5 HDD. Additonal 2.5" Storage Installation Space is provided on the bottom of the case for additional installation of 2.5 HDD/SSD. Easy Cooler Installation Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Case Type
- ATX Mid Tower

Dimensions
- 205 (W) x 460 (H) x 490 (D) &381;œ Weight
- 6.5kg Material
- Plastic, Steel Motherboards
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Compatibility
- Full Size (up to 330 &381;œ) Expansion Slots
- 7 Drive Bays 5.25
- External Bay x 3 3.5
- Internal Bay x 3 2.5
- Internal Bay x 2 5.25/3.5
- 1 (2 in 1) Cooling Component Front
- 120 Blue LED Fan x 1 (Fan included) Top
- 120 Fan Vent x 2 (Fan optional) Rear
- 120 &381;œ Fan x 1 (Fan included) Bottom
- 120 Fan Vent x 1 (Fan optional) I/O Ports
- Microphone x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 2 Color
- Black



















...

With Zalman Cooling Solution Up to 5 System Fans Up to 5 fans can be mounted with standard-equipped 120 front LED fan & back 120 fan. (extra 120 &381;œ top LED fan standard-equipped on Z5 Plus) Bottom PSU Installation Supports bottom PSU installation for effective cooling of PSU & inner space of case. Powerful Cooling Aerodynamically designed front/top vents provide cool air into the system. Black Coating luxurious interior with black coating finishing touch. Connect to Smartphone & External Hard Drive. Place smart phone, external hard drive on the stand next to the USB (Universal Serial Bus) port for convenient charging & connection. Tube Apertures for Liquid Cooling Systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Bottom Dust Filter Dust filters on the bottom side prevent dust from entering. Safe Edge Molding Safe edge molding for safer installing environment. High Quality VGA Card. Without the side guide 330 &381;œ high performance VGA card can be installed. View Through Side Acryl Side Acryl Tuning is provided for users to view the interior of gaming system. Tool Free HDD Installation Easily install HDD without any tool. Anti-vibration & Sound Absorption Rubber Anti-slip rubber at the bottom of the case & the PSU helps to eliminate vibration sound. Spacious Interior Provides spacious interior with 7 PCI extension slots. 2 in 1 Bracket 2 in 1 Adapter Tray is provided for installing FDD / 3.5 HDD Additional 2.5" Storage Installation Space is provided on the bottom of the case for additional installation of 2.5 HDD/SSD. Easy Cooler Installation Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Enclosure Type
- ATX Mid Tower

Dimensions
- 205 (W) x 460 (H) x 490 (D) &381;œ Weight
- 6.5kg Material
- Plastic, Steel Motherboard Compatibility
- Standard ATX / Micro ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Compatibility
- Full Size (up to 330 &381;œ) Expansion Slot
- 7 Drive Bays 5.25
- External Bay x 3 3.5 - Internal Bay x 3 2.5 - Internal Bay x 2 5.25/3.5
- 1 (2 in 1) Cooling Components Front
- 120 Blue LED Fan x 1 (Fan included) Top
- 120 Blue LED Fan x 2 (1 Fan included, 1 optional) Rear
- 120 Fan x 1 (Fan included) Bottom
- 120 Fan Vent x 1 (Fan optional) Fan Controller
- Yes (2 channel) Side Acylic Tuning
- Yes I/O Ports
- Microphone x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 1 Color
- Black



















...

Z7 Neo comes with clean lines, minimalist black interior, & pre-installed RGB-LED fans & gives impression of high quality & craftsmanship. Two-tone interior in black with a white motherboard tray gives Z7 NEO unique & stylish look while front & side panel made from tempered glass gives genuine feel of quality. Bottom mounted PSU is separated from the rest of the case with shroud supporting PSUs up to 18 cm in length with a modular drive cage for two 3, 5- or 2, 5" drives. Two additional 2, 5" SSDs can be mounted to the rear of the motherboard tray. Four 120 mm RGB-LED fans are equipped with white dispersion rings & controlled by an RGB-LED controller to the rear of the motherboard tray & can be connected up to a 4-pin RGB connector on compatible motherboards to colour coordinate your peripherals via software. In total, eight RGB-LED fans can be connected to the RGB-LED controller via proprietary 6-pin connectors as well as two RGB-LED strips with 4-pin connectors (12 V). Roof of the Z7 NEO can accommodate radiator up to 240 mm while front supports a 360 mm radiator. When using air cooling, in addition to the four pre-installed 120 mm fans in the front & back, two 140- or 120 mm fans can be installed in the roof. CPU coolers are limited to a max height of 165 mm. A large magnetic filter in the top protects your components from unwanted dust. Features

Includes:: Zalmans new RGB LED Ring Fans. Built in RGB LED Controller. Tempered glass front & side panels. User friendly, convenient top I/O panel. Large top magnetic dust filter.

...

Zalman Z9 Neo ATX Mid Tower Case (White) Key

Features: Optimized air flow cooling structure Exclusive cooling

...

Aerodynamically designed front/top/bottom vents provide cool air into the system. USB (Universal Serial Bus) 3.0 & user convenience Two USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 ports for user convenience & expandability. Also, 2-channel fan controller & external LED temperature display are provided. Bottom PSU Installation Supports bottom PSU installation for effective cooling of PSU & inner space of case. Tool Free HDD Installation with Anti-Vibration Rubber The server-type Tool-Free HDD Mount Trays allow easy HDD installation/removal & maintenance. Spacious Interior Spacious interior for installing 290mm VGA card has been designed for easy installation & maintenance of various components. View through Side Acrylic Side Acryl Tuning is provided for users to view the interior of gaming system. One Module I/O Front I/O module enables the location of DVD-ROM & other components to be changed easily according to user preference. Dust Filter Dust filters on front/bottom side prevent dust from entering. Additional 2.5" Storage installation Space is provided on the back of M/B plate for installing 2.5 HDD/SSD. 3 in 1 Adapter Tray 3IN1 Adapter Tray is provided for installing FDD / 3.5 HDD / 2.5 HDD/SSD. Easy Cooler Installation Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Tube Apertures for Liquid Cooling Systems Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance. Enclosure Type
- ATX Mid Tower

Dimensions
- 207 (W) x 464 (H) x 504 (D)mm Weight
- 7.2kg Material
- Plastic, Steel Motherboard Compatibility
- Standard ATX / m-ATX Power Supply Compatibility
- Standard ATX / ATX12V VGA Compatibility
- Full Size (290mm) Expansion Slot
- 7 Drive Bays 5.25
- External Bay x 3 3.5
- External Bay x 1, Internal Bay x 5 5.25/3.5/2.5 - 1 (3in-1) Cooling Components Front
- 120mm/140mm Fan Vent x 1 (1 Fan included) Top
- 120mm/140mm Fan Vent x 2 (1 Fan included, 1 optional) Rear
- 120mm Fan Vent x 1 (1 Fan included) Bottom
- 120mm/140mm Fan Vent x 1 (Fan optional) I/O Ports Front
- Mic x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2, Fan Controller, Temperature Display Top
- Power Button x 1 Color
- Black


















...

Front Mesh Cover With Dust Filters The front mesh bay cover allows cool air to enter the system, while the dust filters prevent dust build-up inside the case. Supports Up to Seven Fans A total of seven (Z9, 5 for Z9-U3) fans can be installed in the case. This will help to introduce & expel air effectively from the case, resulting in lower operating temperatures. Z9-U3
- supplied with three 120mm fans; one blue LED 120mm fan installed at the front & top & a standard white blade fan to the rear. Supports Bottom PSU Installation & Cut-out for Cable Management To keep the PSU as cool as possible, the cases have a bottom PSU configuration. There are also cut-outs to allow for tidy cable management. Black Interior Coating The interior of the chassis is coated black to provide a sense of unity & elegant design. Tool Free HDD Installation with Anti-Vibration Rubber The server-type tool-free HDD mount trays allow for easy HDD installation/removal & maintenance. All HDDs are mounted using anti-vibration rubber mounts to aid in reducing HDD noise. Spacious Interior for Installing 290mm Graphics Cards The interior has been designed to be spacious for easy installation & maintenance of various components, including graphics cards up to 290mm long. Two Channel Fan Controller & Temperature Display (Z9-U3 only) The Z9-U3 case has a built-in two channel fan controller for adjusting the speed of up to two connected fans. The ambient temperature of the case is shown using an LED temperature display. By controlling the noise & interior temperature with the fan speed controller, the system can be operated in the optimum condition. On the front I/O module there are microphone & headphone sockets along with two USB3 & two USB2 ports on the Z9-U3 & four USB2 ports on the Z9, for convenience & expandability. Front & Bottom Dust Filters Dust filters in the front & bottom mesh covers prevent dust from entering the system & help to keep the internal components dust-free. Motherboard Compatibility Standard ATX / m-ATX Dimensions 207 (W) x 464 (H) x 504 (D)mm Front I/O Ports Mic x 1, Headphones x 1, USB3 x 2, USB2 x 2, Fan Controller, Temperature Display
...

Aerodynamically designed front/top/bottom vents provide cool air into the system. Two USB (Universal Serial Bus) 3.0 & two USB (Universal Serial Bus) 2.0 ports for user convenience & expandability. Also, 2-channel fan controller & external LED temperature display are provided. Supports bottom PSU installation for effective cooling of PSU & inner space of case. The server-type Tool-Free HDD Mount Trays allow easy HDD installation/removal & maintenance. Spacious interior for installing 290mm VGA card has been designed for easy installation & maintenance of various components. Side Acryl Tuning is provided for users to view the interior of gaming system. Front I/O module enables the location of DVD-ROM & other components to be changed easily according to user preference. Dust filters on front/bottom side prevent dust from entering. Space is provided on the back of M/B plate for installing 2.5" HDD/SSD. 3IN1 Adapter Tray is provided for installing FDD / 3.5" HDD / 2.5" HDD/SSD. Separate aperture for CPU cooler is provided for convenient CPU cooler installation without having to remove motherboard from case. Tube apertures are provided at the rear of the case for convenient water cooling set-up & maintenance.

Specification Enclosure Type ATX Mid Tower

Dimensions 207 (W) x 464 (H) x 504 (D)mm Weight 7.2kg Material Plastic, Steel Motherboard Compatibility Standard ATX / m-ATX Power Supply Compatibility Standard ATX / ATX12V VGA Compatibility Full Size (290mm) Expansion Slot 7 Drive Bays 5.25" External Bay x 3 3.5" External Bay x 1, Internal Bay x 5 5.25"/3.5"/2.5" 1 (3in-1) Cooling Components Front 120mm/140mm Fan Vent x 1 (1 Fan included) Top 120mm/140mm Fan Vent x 2 (1 Fan included, 1 optional) Rear 120mm Fan Vent x 1 (1 Fan included) Bottom 120mm/140mm Fan Vent x 1 (Fan optional) I/O Ports Front Mic x 1, Headphones x 1, USB (Universal Serial Bus) 2.0 x 2, USB (Universal Serial Bus) 3.0 x 2, Fan Controller, Temperature Display Top Power Button x 1 Color Black



...

The ZM-CS5B clip support kit adds compatibility with Intels new socket 1156 to Zalmans range of CNPS CPU coolers. The main difference between the A & the B version of the clip is that the B version fits a wider range of CNPS coolers & water blocks. ...