TEF1118P-16-150W not only offers 16 10/100 Mbps Base-TX RJ45 ports, but also 1 10/100/1000 Mbps Base-T RJ45 ports & 1 1000 Mbps Base-X SFP port. Ports 1-16 comply with the IEEE 802.3af standard & 802.3at standard & each port can support a maximum Po E power output of 30 W. The switch offers a maximum Po E power output of 135 W & it can supply power when exchanging data with APs, IP cameras, & IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, & Extend to help reducing cabling costs of IP terminals. 6KV lighting protection Po E switch is the real monitoring private switch In real project, ap or cameras are often installed outdoor or in a higher position, which also increases the probability of lightning shock toward the cameras & Po E switches. Therefore, some of the equipments may be damaged & even the whole local area network (LAN) may be paralyzed. Tenda TEF11 series switches have professional lightning protection design – 6KV port & power supply thunder prevents. These two protection design can effectively inhibit the lightning current from the network cable & power supply, which is equivalent to add a security Walls to the entire network monitoring system. & the test standards are far higher than the requirements of the state CCC. In the thunderstorms, the monitoring network can also provide stable & reliable services to the monitoring network & ensure the normal transmission of the images. CCTV, Standard, VLAN & Extend Operation Modes Offered CCTV: 1-8 ports support Qo S&65292; If multiple IP cameras are connected to the switch, you are recommended to enable this mode & connect the G1 or SFP1 port of this switch to the upstream device&65292;like the monitoring computer. This ensures smoother monitoring video playback. Standard: The switch’s functions are similar with a common unmanaged switch’s & all the ports of the switch can communicate with each other. VLAN: In this mode, 1-24 ports of the switch cannot communicate with each other, but can communicate with the G1 & SFP1 ports. It can be used to isolate broadcast storms & DHCP broadcasts. Extend: In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other. 135W Po E power supply Ports 1-16 comply with the IEEE802.3af & IEEE802.3at power supply standards. The entire switch offers a maximum Po E power output of 135 W, whereas each port offers a maximum Po E power output of 30 W. The ports can be used to supply power to APs & IP cameras while exchange data. ...

TEF1126P-24-250W not only offers 24 10/100 Mbps Base-TX RJ45 ports, but also 1 10/100/1000 Mbps Base-T RJ45 ports & 1 1000 Mbps Base-X SFP port. Ports 1-24 comply with the IEEE 802.3af standard & 802.3at standard & each port can support a maximum Po E power output of 30 W. The switch offers a maximum Po E power output of 135 W & it can supply power when exchanging data with APs, IP cameras, & IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN, & Extend to help reducing cabling costs of IP terminals. ...

Tenda TEF1210P switch supports 8 Po E ports, which can supply power to most powered devices through 8-core Ethernet cable, & the total Po E power can be up to 123 W while each Po E port can support the maximum of 40 W. 6KV lighting protection Po E switch is the real monitoring private switch In real monitoring project, cameras are often installed in outdoor or a higher position, which also increases the camera & Po E switches the probability of lightning shock. The result is the individual equipment damaged, or lead to the whole local area network (LAN) paralysis. Tenda TEF12 series switches have professional lightning protection design -up 6 kv port & power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence, The test standard is much higher than the national CCC request. In thunderstorms weather, it can also provide monitoring network stable, reliable service, protect the images transmission be normal. Up to 250 meters long distance transmission beyond hundred meters transfer limit Due to the complex monitoring environment, when making cabling & networking, it very often to encounter the problem of inadequate network transmission distance, the distanceof each camera terminal to the monitoring center is different, some only a few meters, some hundred metres, while others are more than kilometers. Tenda TEF12 series Po E monitoring switches, exclusive patent network extension technology, use the common existing twisted pair, can support 250 meters data transmission, break the existing twisted pair hundreds meters transmission limit ; Provide gigabit linked light port, can meet the demand of transmission to a few tens of kilometers. The total Po E power is 123W, 8 port full load power supply is enough The machine total Po E power is 123W, can support 8 port full Po E power supply; One Port POE supply is 40 w, Po E power supply can meet the full football machine & other power supply equipment needs; Eight core power supply design, network power consumption reduced to half, highly reduce the power loss of the inferior cable, make sure the camera get electricity & stability. ...

Tenda TEF1218P switch supports 16 Po E ports, which can supply power to most powered devices through 8-core Ethernet cable, & the total Po E power can be up to 230 W while each Po E port can support the maximum Po E power of 40 W. Po E switch with 6KV lightning protection is the most suitable choice for surveillance private. In reality surveillance project, cameras are generally installed outdoors or in high position, which makes the cameras & switches under the risk of lightning shock. As a result of the individual equipment damaged, or lead to the whole local area network (LAN) paralysis, Tenda TEF12 series switches are designed with professional ports & lightning protection up to 6 KV, with two kinds of protection design respectively & effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence. The test standard is much higher than the national CCC request. In thunderstorms weather, it can also provide monitoring network stable & reliable service, protecting the images transmission to be normal. Up to 250 meters long distance transmission beyond hundred meters transfer limit In the complex surveillance environment, when making cabling & networking, it generally encounter the problem of inadequate network transmission distance, the distance of each camera terminal to the monitoring center is different, some only a few meters, some hundred meters, while some are more than kilometers. Tenda TEF12 series Po E monitoring switches with exclusive patent network extension technology & using the common existing twisted pair, can support 250 meters data transmission & break the existing twisted pair hundreds of meters transmission limit. Providing gigabit linked light port can meet the demand of transmission to a few tens of kilometres. The Po E total power is 230W, 16 port power supply full load is enough The switch total output power is 230W&65292; which can support 16 ports power supply full load. Po E power supply can meet the needs of HD camera & other power supply equipment. With eight core power supply design, network power consumption reduced half, which ensure the camera get electricity & stability. ...

Tenda TEF1226P switch supports 24 Po E ports, which can supply power to most powered devices through 8-core Ethernet cable, & the total Po E power can be up to 370 W while each Po E port can support the maximum of 40 W. 6KV lighting protection Po E switch is the real monitoring private switch In real monitoring project, cameras are often installed in outdoor or a higher position, which also increases the camera & Po E switches the probability of lightning shock. The result is the individual equipment damaged, or lead to the whole local area network (LAN) paralysis. Tenda TEF12 series switches have professional lightning protection design -up 6 kv port & power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence, The test standard is much higher than the national CCC request, . In thunderstorms weather, it can also provide monitoring network stable, reliable service, protect the images transmission be normal. The total Po E power is 370W, 24 port full load power supply is enough The machine total Po E power is 370W, can support 24 port full Po E power supply; One Port POE supply is 40W, Po E power supply can meet the full football machine & other power supply equipment neeeds; Eight core power supply design, network power consumption reduced to half, highly reduce the power loss of the inferior cable, make sure the camera get electricity & stability ...

Tenda TEG1008M 8 Ports Ethernet Switch
- Twisted Pair
- Wall Mountable, Desktop TEG1008M is a high-performance 8-port full

...

Tenda TEG1009P-EI is 9-Port Gigabit Desktop Switch with 8-Port Po E, providing 9 GE Base-T Ethernet ports. 1-8 ports support IEEE802.3af Po E (15.4W) or 4 ports support 802.3at Po E (30W). Through conventional Cat 5 twisted pair, power can be transmitted along with data for AP, IP Camera & IP Phone. Plus, the device is complied with 802.3az (EEE) standard, & is designed with superior performance such as lightning protection for 9th uplink port, Po E dynamic power, lower power consumption & fan-less. Thus, Wireless coverage, safety project, difficult power supply of end-device, maintenance hassle are effectively solved, TEG1009P is ideal for you to lower cost greatly. Superior Po E Performance 1-8 ports support IEEE 802.3af (15.4W) or 1-4 ports IEEE 802.3at (30W). Providing Po E dynamic power, the device can auto-detect power consumption of PD device & match proper output power Pioneered 9 GE Ports in Domestic Provides 9 GE Ethernet ports, supports layer 2 wire-speed forwarding on each port, & fully meets needs of Gigabit WLAN, HD data monitor High Reliability Integrates with professional lightning protection circuit & 2-level lightning-proof for uplink port (4KV lightning proof for 9th port). Stronger Ethernet technology to improve your network performance Plug & Play Plug & play, no any configuration needed. Easy to maintain the device Easy to Install The device is equipped with magnet & mounting hole, so its easy to be installed based on metal platform or on smooth wall Extend power supply distance Adopts Cat-5e, extend the power & transmission distance up to 150 meters. The device is not only improving the quality of data delivery, but also expands coverage range of small network ...

The TEG1016D & TEG1024D are a 16 & 24 port Gigabit switches respectively. They support auto MDI/MDIX, store-&-forward switching, & have an 8, 000 MAC address table. The TEG1016D has a 32 Gbps backplane bandwidth while the TEG1024D has a 48 Gbps backplane bandwidth. They have compact 11” metal cases that are convenient to put on a desk or shelf for a small office network, but they are equally at home in a rack using the included 1U mounting kit. 16 10/100/1000 Mbps ports connect to the workstation & support MDI/MDIX Compatible with the IEEE802.3, IEEE802.3u, IEEE802.3ab Ethernet standards Supports NWAY auto-negotiation function, auto-detect transfer data rate, UPn P, full-duplex, & automatically chooses the best network connectivity mode Supports Auto MDI/MDIX function, predigests the network span & maintenance. Supports IEEE802.3x full-duplex flow control, & half-duplex backpressure flow control Supports non-blocking line speed transfer Offers diagnosis & status LED indicators Adopts store-&-forward mode, supports MAC Address auto-learning function & integrates 8K MAC Address Table Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TEG1105P-4-63W is a Tenda Po E switch that offers 5*10/100/1000 Mbps Base-TX RJ45 ports. Ports 1-4 comply with the IEEE 802.3af standard (maximum Po E power output: 15.4 W) & 802.3 at standard (maximum Po E power output: 30 W). The switch offers a maximum Po E power output of 58 W & can supply power to APs, IP cameras, & IP phones & exchange data with them through CAT5 cables. It also provides simple management modes such as VLAN to help reduce cabling costs of IP terminals like APs & IP cameras. One-Key VLAN If "VLAN mode" is enabled, Port 1-4 will be isolated respectively but can communicate with the port 5. Hardware DIP switch to isolate ports to prevent broadcast storm & defend against DHCP spoofing. 6KV lighting protection Po E switch is the real monitoring private switch In real project, APs or cameras are usually installed in outdoor or a higher position, which also increases the camera & Po E switches the probability of lightning shock. The result is the individual equipment damaged, or lead to the whole local area network (LAN) paralysis. Tenda TEF11 series switches have professional lightning protection design
- up to 6KV port & power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which is equivalent to give the entire network monitoring system with a security fence, The test standard is much higher than the national CE request. In thunderstorms weather, it can also provide monitoring network stable & reliable services & protect the images transmission normally. 58W Po E power supply Ports 1-4 comply with the IEEE802.3af & IEEE802.3at power supply standards. The entire switch offers a maximum Po E power output of 58W, whereas each port offers a maximum Po E power output of 30 W. The ports can be used to supply power to & exchange data with APs & IP cameras.
...

Tenda TEG3224P, which is dedicated for surveillance projects & smart wireless network. It provides 24 10/100/1000 Mbps auto-negotiation Po E ports & 4 combo SFP slots, all the Po E ports support IEEE 802.3af (15.4W) & 802.3at (30 W) compliance. In addition, it features with ARP attack defence, worm attack defence, IP+MAC+PORT+VLAN Binding, MAC filter & other safety setting. The switch also integrates with the humanized web-based managements, perfect Qo S strategy & rich VLAN function. It is best choice for your network. Higher Security Support the whole network management, prevent ARP virus, IP/MAC deceit & Dos attacks, 802.1 X & MAC authentication. More applications to the environment 24 Gigabit+ 4 SFP can offer flexible port combination. Po E dynamic power supply, port output power automatically matches PD equipment, it is energy saving & secured. Troubleshooting faster Support VCT cable diagnosis, quickly locate fault point of illness, is more efficient to save time. ...