The Tauron is a massive ATX format PC case & available in multiple color variations. There are two different versions in black but the mainboard mount, slot faceplates, hard drives installation bays, blades from the internal fans & the latches of the quick locking mechanisms are in a different color from the rest of the case, either toxic green or fiery red. Fittingly, the colorful elements on the inside is also coordinated with the illumination of both black versions: With the red version two 120 mm LED front fans the status LEDs are red, while in the green version these same elements are illuminated green. In addition, a completely white version of the Tauron is available which include blue illuminating front fans. Here the internal fans are equipped with white blades. The other key data of the individual variations are identical: The Tauron comes with an I/O panel located on the top of the case, which is protected by a cover. The I/O panel offers two USB3.0 ports as well as two audio & two USB2.0 ports. The USB2.0 & the audio ports connect directly to the mainboard, while the USB3.0 connects to an external USB3.0 interface either on the mainboard or a corresponding USB3.0 controller card. in addition, the Tauron’s I/O panel also has two fan controls. These two controls can regulate up to six case fans. With this, the airflow rate of the case can be quickly & easily adjusted to current conditions & individual demands. The entire structure of the case compliments the desire for proper cooling of the internal components. Two combined 120 mm fans in the front draw in cool air from the outside. A 120 mm fan on the rear side & a larger 170 mm fan on the ceiling blow the warm air out of the case. If that is not enough, the case also offers the option to install another 120 mm or 140 mm fan on the floor. The power supply has an autonomous cooling cycle: Cool air is supplied through the dust filter of the air intake on the case floor & blown out directly out through the rear of the case. In addition, air is drawn through inlets on the right side of the case which contributes to the cooling of the CPU & hard drives. The Tauron case has three hard drives cages, two of which are modular: They can be arranged, if necessary, to install long graphic cards up to a maximum length of 42 cm. The mounting of up to a maximum of seven 2.5" or 3.5" hard drives or Solid State Disks occurs through the decoupled installation bays. The hard drive cages allows up to three optical drives to be installed, with the lowest 5.25" drive bay offering the possibility to install a 3.5" drive bay. The installation of the optical drives & the 3.5" drive frame occur through the pre-installed quick locking mechanisms. The arrangement of cables on the inside occurs through our elaborate cable management system, in which the cables can be simply & cleanly stored behind the mainboard mount. This allows optimal airflow throughout the inside of the case. In addition to the cable feed through, a large hole for CPU coolers on the mainboard mount is provided, so when changing coolers the entire mainboard does not need to be removed from the case. The Tauron case has decoupled stand feet & delivery

Includes:: an extensive accessory set. In order to simplify the initial start-up of the case, a detailed instruction manual is available for download.

Features: ATX case 2x 5.25" drive bays (external) 1x 5.25" or 3.5" drive bays (external) 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal) Top I/O: 2x USB3.0, 2x USB2.0 & 2x audio, power & reset button 7 slots for add-on cards Acrylic side panel Plastic front panel with air inlet, drive bay covers in mesh design Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers 4 openings for water cooling Cable management system Interior painting Removable HDD brackets support long VGA cards up to 42 cm 2x fan speed controllers for up to 6 fans Dimensions: 510 x 205 x 495 mm (L x W x H) Weight: ~9.5kg Fan configuration: Case front 2x 120 mm LED fan (pre-installed) Rear panel 1x 120 mm fan (pre-installed) Top panel 1x 170 mm fan (pre-installed)



...

The Tauron is a massive ATX format PC case & available in multiple color variations. There are two different versions in black but the mainboard mount, slot faceplates, hard drives installation bays, blades from the internal fans & the latches of the quick locking mechanisms are in a different color from the rest of the case, either toxic green or fiery red. Fittingly, the colorful elements on the inside is also coordinated with the illumination of both black versions: With the red version two 120 mm LED front fans the status LEDs are red, while in the green version these same elements are illuminated green. In addition, a completely white version of the Tauron is available which include blue illuminating front fans. Here the internal fans are equipped with white blades. The other key data of the individual variations are identical: The Tauron comes with an I/O panel located on the top of the case, which is protected by a cover. The I/O panel offers two USB3.0 ports as well as two audio & two USB2.0 ports. The USB2.0 & the audio ports connect directly to the mainboard, while the USB3.0 connects to an external USB3.0 interface either on the mainboard or a corresponding USB3.0 controller card. in addition, the Tauronfs I/O panel also has two fan controls. These two controls can regulate up to six case fans. With this, the airflow rate of the case can be quickly & easily adjusted to current conditions & individual demands. The entire structure of the case compliments the desire for proper cooling of the internal components. Two combined 120 mm fans in the front draw in cool air from the outside. A 120 mm fan on the rear side & a larger 170 mm fan on the ceiling blow the warm air out of the case. If that is not enough, the case also offers the option to install another 120 mm or 140 mm fan on the floor. The power supply has an autonomous cooling cycle: Cool air is supplied through the dust filter of the air intake on the case floor & blown out directly out through the rear of the case. In addition, air is drawn through inlets on the right side of the case which contributes to the cooling of the CPU & hard drives. The Tauron case has three hard drives cages, two of which are modular: They can be arranged, if necessary, to install long graphic cards up to a maximum length of 42 cm. The mounting of up to a maximum of seven 2.5" or 3.5" hard drives or Solid State Disks occurs through the decoupled installation bays. The hard drive cages allows up to three optical drives to be installed, with the lowest 5.25" drive bay offering the possibility to install a 3.5" drive bay. The installation of the optical drives & the 3.5" drive frame occur through the pre-installed quick locking mechanisms. The arrangement of cables on the inside occurs through our elaborate cable management system, in which the cables can be simply & cleanly stored behind the mainboard mount. This allows optimal airflow throughout the inside of the case. In addition to the cable feed through, a large hole for CPU coolers on the mainboard mount is provided, so when changing coolers the entire mainboard does not need to be removed from the case. The Tauron case has decoupled stand feet & delivery

Includes:: an extensive accessory set. In order to simplify the initial start-up of the case, a detailed instruction manual is available for download.

Features: ATX case 2x 5.25" drive bays (external) 1x 5.25" or 3.5" drive bays (external) 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal) Top I/O: 2x USB3.0, 2x USB2.0 & 2x audio, power & reset button 7 slots for add-on cards Acrylic side panel Plastic front panel with air inlet, drive bay covers in mesh design Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers 4 openings for water cooling Cable management system Interior painting Removable HDD brackets support long VGA cards up to 42 cm 2x fan speed controllers for up to 6 fans Dimensions: 510 x 205 x 495 mm (L x W x H) Weight: ~9.5kg Fan configuration: Case front 2x 120 mm LED fan (pre-installed) Rear panel 1x 120 mm fan (pre-installed) Top panel 1x 170 mm fan (pre-installed) @



...

The Tauron is a massive ATX format PC case & available in multiple color variations. There are two different versions in black but the mainboard mount, slot faceplates, hard drives installation bays, blades from the internal fans & the latches of the quick locking mechanisms are in a different color from the rest of the case, either toxic green or fiery red. Fittingly, the colorful elements on the inside is also coordinated with the illumination of both black versions: With the red version two 120 mm LED front fans the status LEDs are red, while in the green version these same elements are illuminated green. In addition, a completely white version of the Tauron is available which include blue illuminating front fans. Here the internal fans are equipped with white blades. The other key data of the individual variations are identical: The Tauron comes with an I/O panel located on the top of the case, which is protected by a cover. The I/O panel offers two USB3.0 ports as well as two audio & two USB2.0 ports. The USB2.0 & the audio ports connect directly to the mainboard, while the USB3.0 connects to an external USB3.0 interface either on the mainboard or a corresponding USB3.0 controller card. in addition, the Tauron’s I/O panel also has two fan controls. These two controls can regulate up to six case fans. With this, the airflow rate of the case can be quickly & easily adjusted to current conditions & individual demands. The entire structure of the case compliments the desire for proper cooling of the internal components. Two combined 120 mm fans in the front draw in cool air from the outside. A 120 mm fan on the rear side & a larger 170 mm fan on the ceiling blow the warm air out of the case. If that is not enough, the case also offers the option to install another 120 mm or 140 mm fan on the floor. The power supply has an autonomous cooling cycle: Cool air is supplied through the dust filter of the air intake on the case floor & blown out directly out through the rear of the case. In addition, air is drawn through inlets on the right side of the case which contributes to the cooling of the CPU & hard drives. The Tauron case has three hard drives cages, two of which are modular: They can be arranged, if necessary, to install long graphic cards up to a maximum length of 42 cm. The mounting of up to a maximum of seven 2.5" or 3.5" hard drives or Solid State Disks occurs through the decoupled installation bays. The hard drive cages allows up to three optical drives to be installed, with the lowest 5.25" drive bay offering the possibility to install a 3.5" drive bay. The installation of the optical drives & the 3.5" drive frame occur through the pre-installed quick locking mechanisms. The arrangement of cables on the inside occurs through our elaborate cable management system, in which the cables can be simply & cleanly stored behind the mainboard mount. This allows optimal airflow throughout the inside of the case. In addition to the cable feed through, a large hole for CPU coolers on the mainboard mount is provided, so when changing coolers the entire mainboard does not need to be removed from the case. The Tauron case has decoupled stand feet & delivery

Includes:: an extensive accessory set. In order to simplify the initial start-up of the case, a detailed instruction manual is available for download.

Features: ATX case 2x 5.25" drive bays (external) 1x 5.25" or 3.5" drive bays (external) 7x 2.5" or 3.5" bays with removable mounting trays for HDDs (internal) Top I/O: 2x USB3.0, 2x USB2.0 & 2x audio, power & reset button 7 slots for add-on cards Acrylic side panel Plastic front panel with air inlet, drive bay covers in mesh design Quick fasteners for optical drives, mainboard mounting with installation opening for CPU coolers 4 openings for water cooling Cable management system Interior painting Removable HDD brackets support long VGA cards up to 42 cm 2x fan speed controllers for up to 6 fans Dimensions: 510 x 205 x 495 mm (L x W x H) Weight: ~9.5kg Fan configuration: Case front 2x 120 mm LED fan (pre-installed) Rear panel 1x 120 mm fan (pre-installed) Top panel 1x 170 mm fan (pre-installed)



...

<iframe width="510" height="300" src="https://www.youtube.com/embed/ESl Hrxf 2 Sa 8" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> Sharkoon TG5 – The Case for Hardware Enthusiasts The Sharkoon TG5 is the perfect ATX Midi tower for all hardware enthusiasts, who want to show what they have got. Thanks to the front & the side panels made from tempered glass, everyone will want to see the equipment built into the case. Depending on the case version, three pre-installed 120 mm LED fans in the front as well as a 120 mm LED fan in the rear panel provide an illumination to attune with the built-in hardware
- in red, green, blue or white. So nothing distracts from the essentials, we have constructed the case with a number of options to hide the power supply, cables & hard drives. Cableless Comfort Thanks to an optimized cable management system with lots of cable pass-throughs, the complete cabling can be hidden between the mainboard & the non-windowed side panel. The built-in hardware stays in focus, & the airflow remains unaffected. The power supply as well as up to three 3.5" hard drives disappear in the tunnel on the bottom of the case. Air vents on top & on the side of the tunnel ensure the cooling of the hard drives. If necessary, a new CPU cooler with a max. height of 16.7 cm can be installed easily through the opening in the mainboard tray. Maximum length for graphics cards is 40 cm. Maximum length for power supplies 20.5 cm. The front panel is designed cableless & is therefore conveniently removable. Two pre-installed dust filters along the sides of the front panel protect the PC from contamination. For cleaning, they can be easily removed & put back on. Another dust filter is also pre-installed on the top panel. This filter can be easily removed & cleaned thanks to the magnetic fastener. Of course, yet another dust filter protects the bottom of the case from dust & dirt. The Installation Options – Discreet & Versatile With the design of the front panel, we consciously refrain from the established drive bays for optical disc drives & emphasize the look inside the case & the LED fans with the tempered glass front. The TG5 has nonetheless sufficient possibilities to discreetly mount hard drives. Up to two 3.5" hard drives or 2.5" HDDs/SSDs can be mounted in an HDD cage screwed tightly to the top of the tunnel. Another 3.5" hard drive finds space on the bottom of the tunnel below. Instead of a 3.5" hard drive, the whole HDD cage can be mounted to the bottom of the tunnel with convenient thumbscrews, & it can then be positioned, thanks to practical oval hole cutouts, up to the fans on the front panel. This way, more space can be created easily for the cabling of the power supply. Behind the mainboard, the TG5 provides two vertical supports, with convenient thumbscrews, for up to two additional 2.5" HDD/SSDs. Enough Space for an Optimized Airflow An optimized airflow is ensured by air vents on both sides of the front panel which has three pre-installed 120 mm LED fans. Alternatively, fitting holes for two 140 mm fans are available. A 120 mm LED fan is pre-installed into the rear panel. Naturally, the TG5 provides the option to modify the case with a professional water cooling. A 360 mm radiator, with a total height of 5.5 cm including fan, can be attached to the front of the case. The 120 mm fan on the back can be replaced with a 120 mm radiator. Up to three 120 mm or two 140 mm fans can be attached to the top panel. The fans or radiators can be positioned perfectly thanks to the oval hole cutouts. Quick Access to the Peripherals The audio connectors for microphone & headphones as well as two USB (Universal Serial Bus) 2.0 & two USB (Universal Serial Bus) 3.0 interfaces are found on the top of the front panel, providing for the convenient connection of the most important peripherals. The USB (Universal Serial Bus) 3.0 ports are connected via a 19-pin mainboard connector. Specifications Form Factor: ATX Expansion Slots: 7 Interior Painting: YES Tool-free Devices Installation: YES Cable Management System: YES Side Panel: Tempered glass 4 mm Color Versions: Red/ Green/ Blue/ White Weight: 8.5kg

Dimensions (L x W x H): 45.2 x 22.0 x 46.5 cm I/O: USB (Universal Serial Bus) 3.0 (Top): 2 USB (Universal Serial Bus) 2.0 (Top): 2 Drive Bays: 3.5": 1 3.5" or 2.5": 2 2.5": 2 Fan Configuration: Front Panel: 3x 120 mm LED fan (pre-installed) or radiator (optional) Rear Panel: 1x 120 mm LED fan (pre-installed) Top Panel: 3x 120 mm or 2x 140 mm fan (optional) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 40.0 cm Max. Height CPU Cooler: 16.7 cm Max. Length Power Supply: 20.5 cm Max. Height Radiator incl. Fan (Front): 5.5 cm


...

<iframe width="510" height="300" src="https://www.youtube.com/embed/ESl Hrxf 2 Sa 8" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> Sharkoon TG5 – The Case for Hardware Enthusiasts The Sharkoon TG5 is the perfect ATX Midi tower for all hardware enthusiasts, who want to show what they have got. Thanks to the front & the side panels made from tempered glass, everyone will want to see the equipment built into the case. Depending on the case version, three pre-installed 120 mm LED fans in the front as well as a 120 mm LED fan in the rear panel provide an illumination to attune with the built-in hardware
- in red, green, blue or white. So nothing distracts from the essentials, we have constructed the case with a number of options to hide the power supply, cables & hard drives. Cableless Comfort Thanks to an optimized cable management system with lots of cable pass-throughs, the complete cabling can be hidden between the mainboard & the non-windowed side panel. The built-in hardware stays in focus, & the airflow remains unaffected. The power supply as well as up to three 3.5" hard drives disappear in the tunnel on the bottom of the case. Air vents on top & on the side of the tunnel ensure the cooling of the hard drives. If necessary, a new CPU cooler with a max. height of 16.7 cm can be installed easily through the opening in the mainboard tray. Maximum length for graphics cards is 40 cm. Maximum length for power supplies 20.5 cm. The front panel is designed cableless & is therefore conveniently removable. Two pre-installed dust filters along the sides of the front panel protect the PC from contamination. For cleaning, they can be easily removed & put back on. Another dust filter is also pre-installed on the top panel. This filter can be easily removed & cleaned thanks to the magnetic fastener. Of course, yet another dust filter protects the bottom of the case from dust & dirt. The Installation Options – Discreet & Versatile With the design of the front panel, we consciously refrain from the established drive bays for optical disc drives & emphasize the look inside the case & the LED fans with the tempered glass front. The TG5 has nonetheless sufficient possibilities to discreetly mount hard drives. Up to two 3.5" hard drives or 2.5" HDDs/SSDs can be mounted in an HDD cage screwed tightly to the top of the tunnel. Another 3.5" hard drive finds space on the bottom of the tunnel below. Instead of a 3.5" hard drive, the whole HDD cage can be mounted to the bottom of the tunnel with convenient thumbscrews, & it can then be positioned, thanks to practical oval hole cutouts, up to the fans on the front panel. This way, more space can be created easily for the cabling of the power supply. Behind the mainboard, the TG5 provides two vertical supports, with convenient thumbscrews, for up to two additional 2.5" HDD/SSDs. Enough Space for an Optimized Airflow An optimized airflow is ensured by air vents on both sides of the front panel which has three pre-installed 120 mm LED fans. Alternatively, fitting holes for two 140 mm fans are available. A 120 mm LED fan is pre-installed into the rear panel. Naturally, the TG5 provides the option to modify the case with a professional water cooling. A 360 mm radiator, with a total height of 5.5 cm including fan, can be attached to the front of the case. The 120 mm fan on the back can be replaced with a 120 mm radiator. Up to three 120 mm or two 140 mm fans can be attached to the top panel. The fans or radiators can be positioned perfectly thanks to the oval hole cutouts. Quick Access to the Peripherals The audio connectors for microphone & headphones as well as two USB (Universal Serial Bus) 2.0 & two USB (Universal Serial Bus) 3.0 interfaces are found on the top of the front panel, providing for the convenient connection of the most important peripherals. The USB (Universal Serial Bus) 3.0 ports are connected via a 19-pin mainboard connector. Specifications Form Factor: ATX Expansion Slots: 7 Interior Painting: YES Tool-free Devices Installation: YES Cable Management System: YES Side Panel: Tempered glass 4 mm Color Versions: Red/ Green/ Blue/ White Weight: 8.5kg

Dimensions (L x W x H): 45.2 x 22.0 x 46.5 cm I/O: USB (Universal Serial Bus) 3.0 (Top): 2 USB (Universal Serial Bus) 2.0 (Top): 2 Drive Bays: 3.5": 1 3.5" or 2.5": 2 2.5": 2 Fan Configuration: Front Panel: 3x 120 mm LED fan (pre-installed) or radiator (optional) Rear Panel: 1x 120 mm LED fan (pre-installed) Top Panel: 3x 120 mm or 2x 140 mm fan (optional) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 40.0 cm Max. Height CPU Cooler: 16.7 cm Max. Length Power Supply: 20.5 cm Max. Height Radiator incl. Fan (Front): 5.5 cm


...

<iframe width="510" height="300" src="https://www.youtube.com/embed/ Jkb Ewm H2RI0" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> Perfectly Illuminated in 16.8 Million Colors Case illumination in yellow? Or how about in violet? Simply decide spontaneously at any time! Not just between two colors, but between 16.8 million at your every whim & mood. Thanks to the TG5 RGB ATX Case, this is no problem at all. This is possible via the four built-in RGB LED fans as well as the provided 6-port RGB hub. Once mounted inside the case, together with compatible mainboards with a 12V-G-R-B connector, six LED elements are easily controlled, synchronized & illuminated via the mainboard software. The 6-port RGB hub is compatible with Asus Aura, Gigabyte Fusion & MSI Mystic Light. For mainboards without a 12V-G-R-B connector, the TG5 RGB comes with a manual color control. This allows up to six connected LED elements, for example the four pre-installed RGB LED fans & provided LED strip, to be illuminated in one of six colors, or completely in white, manually through a switch on the manual color control. In addition, the almost completely glassed TG5 RGB makes no compromises on comfort or features, & offers nearly 16.8 million installation possibilities for passionate gamers! Cableless Comfort Thanks to an optimized cable management system with lots of cable pass-throughs, the complete cabling of the TG5 RGB can be hidden between the mainboard & the non-windowed side panel. The built-in hardware stays in focus & the airflow remains unaffected. The power supply as well as up to three 3.5" hard drives disappear in the tunnel on the bottom of the case. Air vents on top & on the side of the tunnel ensure the cooling of the hard drives. If necessary, a new CPU cooler with a max. height of 16.7 cm can be installed easily through the opening in the mainboard tray. Maximum length for graphics cards is 40 cm. Maximum length for power supplies 20.5 cm. The front panel is designed cableless & is therefore conveniently removable. Two pre-installed dust filters protect the PC from contamination. For cleaning, they can be easily removed & put back on. Another dust filter is also pre-installed on the top panel, which can be easily cleaned & removed thanks to the magnetic fastener. Naturally an additional dust filter also protects the bottom of the case from contamination. The Installation Options – Discreet & Versatile With the design of the TG5 RGB front panel, we consciously refrain from the established drive bays for optical disc drives & emphasize the look inside the case & the pre-installed RGB LED fans with the tempered glass front. The TG5 RGB has nonetheless sufficient possibilities to discreetly mount hard drives. Up to two 3.5" hard drives or 2.5" HDDs/SSDs can be mounted in a HDD cage screwed tightly to the top of the tunnel. Another 3.5" hard drive finds space on the bottom of the tunnel below. Instead of a 3.5" hard drive, the whole HDD cage can be mounted to the bottom of the tunnel with convenient thumbscrews & be positioned, thanks to practical oval hole cutouts, up to the fans on the front panel. This way, more space can be created easily for the cabling of the power supply. Behind the mainboard, the TG5 provides two vertical supports, with convenient thumbscrews, for up to two additional 2.5" HDD/SSDs. Enough Space for an Optimized Airflow Air vents on the left & right side of the front panel ensure an optimized airflow. Three 120 mm RGB LED fans are already pre-installed. Alternatively fitting holes for two 140 mm fans are available. A 120 mm RGB LED fan is pre-installed into the rear panel. Naturally the TG5 RGB provides the option to mod the case with a professional water cooling. A 360 mm radiator with a total height of 5.5 cm including fan can be attached to the front of the case. The 120 mm fan on the back can be replaced with a 120 mm radiator. Up to three 120 mm or two 140 mm fans can be attached to the top panel. The fans or radiators can be positioned perfectly thanks to the oval hole cutouts. Quick Access to the Peripherals The audio connectors for microphone & headphones as well as two USB (Universal Serial Bus) 2.0 & two USB (Universal Serial Bus) 3.0 interfaces for the convenient connection of the most important peripherals are found on the top of the front panel. Specifications Form Factor: ATX Expansion Slots: 7 Interior Painting: Yes Tool-free Devices Installation: YES Cable Management System: YES Side Panel Tempered Glass 4 mm: YES Weight: 8.5kg

Dimensions (L x W x H): 45.2 x 22.0 x 46.5 cm I/O: USB (Universal Serial Bus) 3.0 (Top): 2 USB (Universal Serial Bus) 2.0 (Top): 2 Audio (Top): YES Drive Bays: 3.5": 1 3.5" or 2.5": 2 2.5": 2 Fan Configuration: Front Panel: 3x 120 mm RGB LED fan (pre-installed) or radiator (optional) Rear Panel: 1x 120 mm RGB LED fan (pre-installed) Top Panel: 3x 120 mm or 2x 140 mm fan (optional) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 40.0 cm Max. Height CPU Cooler: 16.7 cm Max. Length Power Supply: 20.5 cm Max. Height Radiator incl. Fan (Front): 5.5 cm

...

After the success of our Vaya case we now proudly present, with a new & exciting look, the Vaya II. Like its predecessor it has many advantages “ plus looks quite awesome “ at a low price. The high-quality black finish on both the outside & inside shows our premium workmanship. An extensive set of accessories are supplied in the Vaya II. Generous Space With its considerable amount of width the Vaya II has more room than its competitors for installing cooling towers of up to a maximum height of 16.5 centimeters. Graphics cards with a length of up to 26.5 centimeters will easily fit within the case, as well. The maximum size for the power supply is an enormous 28 centimeters in length. Customize your fan The pre-installed 120 mm LED fan turns the case into a deep & powerful blue. This pre-installed fan ensures the optimal cooling of your system. If the airflow inside the case needs to be increased, we offer the option to install another 80 mm or 120 mm fan on the backside of the case. Ports on the front Two USB (Universal Serial Bus) 2.0 ports & two Audio ports on the front of the case always ensure easy & fast access for external hardware. Installation of drives This ATX case has space for four 5.25" devices & another 3.5" device, which can be accessed externally. This slot is often used for a card reader. Furthermore, there is still room for another four 3.5" devices & an additional 2.5" SSD/HDD at the bottom of the case. Every device is secured with our quick-release fasteners.

Features: ATX case 4x 5.25" drive bays 4x 3.5" HDD bays (internal) 1x 3.5" drive bay (external) 1x 2.5" installation option for hard drives/SSD (internal) Front I/O: 2x USB (Universal Serial Bus) 2.0, 2x Audio Black interior finish 7 Slots for expansion cards Plastic front panel with mesh air intake Quick fasteners for optical drives & HDDs, mainboard mounting panel with installation opening for coolers 3 openings for water cooling Cable management system Dimension: 470 x 205 x 437 mm (L x W x H) Weight: ~5kg Fan configuration: Case front: 1x 120 mm LED fan (pre-installed) Side panel: 1x 120 mm fan (optional) Rear panel: 1x 80 mm or 120 mm fan (optional) Color versions: Black case (fan LED blue) Compatibility: Max. length graphics card: 26.5 cm Max. height CPU cooler: 16.5 cm Max. length PSU: 28 cm Package content: ¢ ATX case Vaya II ¢ Accessory kit

...

Sharkoon VG4-W ATX Midi Tower Case (Green) The VG4-W case stands out due to its versatile features at an attractive price. The ATX case is available in three different interior colors (green, blue or red). These are clearly visible through the acrylic side window. In the front, two USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug), two USB (Universal Serial Bus) 2.0 & two Audio connection options are provided. Generous Space Thanks to the provided side panels the VG4-W offers space for the hassle-free installation of tower coolers with a height of up to 16.0 cm. Graphics cards with a maximum length of up to 31.0/38.5 cm (after removing the SSD hard drive cage) can also be mounted. A total of up to six expansion cards can be installed. The maximum length for power supplies is 25.0 cm; a suitable dust filter is pre-installed on the bottom. The VG4-W offers installation openings for a CPU cooler, two openings for optional water cooling as well as a comfortable cable management system. Installation Options for Drives The ATX case offers three 5.25"drive bays for optical drives (two of which include tool-free installation) or two 5.25" drive bays & an externally accessible 3.5" bay. Here, for example, a card reader can be quickly & easily installed. Internally, three 3.5" hard drives can be installed using the quick fasteners. In the second mounting frame can three 2.5" HDDs/SDDs be installed, in the bottom of the case there is space for an additional 2.5" HDD/SSD. Fan Configuration A 120 mm LED fan with provided dust filter are pre-installed in the front & a 120 mm LED fan is also pre-installed in the rear panel. Front Connections Two USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug), two USB (Universal Serial Bus) 2.0 as well as two Audio ports in the front offer quick access for connecting peripherals. Specifications: General: Form Factor: ATX Expansion Slots: 6 Water Cooling Openings: 2 Interior Painting: œ“ Tool-free Devices Installation: œ“ Cable Management System: œ“ Side Panel: Acrylic Color Version: Green Weight: 4.5kg

Dimensions (L x W x H): 44.5 x 20.0 x 43.0 cm I/O: USB (Universal Serial Bus) 3.0 (Front): 2* USB (Universal Serial Bus) 2.0 (Front): 2 Audio (Front): œ“ Drive Bays: 5.25": 2 5.25" or 3.5": 1 5.25" to 3.5" Bay Cover: 1 3.5": 3 2.5": 4 Fan Configuration: Front Panel: 1x 120 mm LED fan (pre-installed) Rear Panel: 1x 120 mm LED fan (pre-installed) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 31.0/38.5 cm** Max. Height CPU Cooler: 16.0 cm Max. Length Power Supply: 25.0 cm Note: * internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug ** with middle HDD cage removed

...

The VG4-W case stands out due to its versatile features at an attractive price. The ATX case is available in four different interior colors (black, green, blue or red). These are clearly visible through the acrylic side window. In the front, two USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug), two USB (Universal Serial Bus) 2.0 & two audio connection options are provided. Generous space: Thanks to the provided side panels the VG4-W offers space for the hassle-free installation of tower coolers with a height of up to 16 cm. Graphics cards with a maximum length of up to 31/38.5 cm (after removing the SSD hard drive cage) can also be mounted. A total of up to seven expansion cards can be installed. The maximum length for power supplies is 25 cm; a suitable dust filter is pre-installed on the bottom. The VG4-W offers installation openings for a CPU cooler, two openings for optional water cooling as well as a comfortable cable management system. Fan configuration: A 120 mm LED fan provides with dust filter pre-installed in the front & a 120 mm LED fan also pre-installed in the rear panel. Front connections: Two USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug), two USB (Universal Serial Bus) 2.0 as well as two audio plugs in the front offer quick access for connecting peripherals. Installation options for drives: The ATX case offers three 5.25"drive bays for optical drives (two of which are equipped with quick fasteners) or two 5.25" drive bays andan externally accessible 3.5 bay. Here, for example, a card reader can be quickly & easily installed. Internally, three 3.5 hard drives can be installed using the quick fasteners. In the second mounting frame can three 2.5 HDDs/SDDs be installed, in the bottom of the case there is space for an additional 2.5 HDD/SSD.

Features: ATX case Mounting possibilities: 3x 5.25" drive bays (external) or 2x 5.25" drive bays + 1x 3.5" bay (external) + 3x 3.5" hard drive bays (internal) + 4x 2.5" SSDs/HDDs (internal) Front I/O: 2x USB (Universal Serial Bus) 3.0 (internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug), two USB (Universal Serial Bus) 2.0 as well as two audio plugs. Interior finish 7 slots for expansion cards Quick fasteners for two optical drives & three 3.5" hard drives Installation opening for CPU cooler 2 openings for water cooling Cable management system Acrylic side panel Dimensions: 445 x 200 x 430 mm (L x W x H) Weight: 3.5kg Fan configuration: Case front: 1x 120 mm LED fan (pre-installed) Rear panel: 1x 120 mm LED fan (pre-installed) Compatibility: Mainboard compatibility: mini-ITX, micro-ATX, ATX Max. length graphics card: 31/38.5 cm (after removing the SSD hard drive cage) Max. height CPU cooler: 16 cm Max. length PSU: 25 cm Package contents: ATX case VG4-W 1x slot cover, Piezo speaker, mounting material

...

Sharkoon VG5-W ATX Midi Tower Case (Green) Colorful Case for Gamers Stylish appearance at an attractive price: The Sharkoon VG5-W, in the flashy Window version, impresses not just with its large acrylic side window. Thanks to the brawny design of the front panel & the four different color versions in red, blue, green & black with matching color 120 mm LED fans, the ATX case is definitely an eye-catcher. Cableless Front Panel Design Especially practical is the cableless front panel design of the VG5-W: The panel can be effortlessly removed at any time without having to first detach any cables from the front ports. This makes the installation of 5.25" drives a breeze. Lots of Space for Components The broad side panels of the VG5-W offer enough space for the easy installation of tower coolers with a height of up to 16 cm. Graphics cards with a maximum length of up to 31 cm can be installed; up to 38.5 cm with the middle HDD cage removed. Maximum length for power supplies is 25 cm, plus a suitable dust filter is pre-installed on the case bottom. The VG5-W also offers a useable CPU cooler cutout, two water cooling openings as well as a convenient cable management system. Best Arranged Fan Configuration For extremely efficient airflow inside the case, two 120 mm LED fans in the front panel as well as a 120 mm LED in the rear panel are pre-installed. Current Front Connectors Two USB (Universal Serial Bus) 3.0 as well as two Audio ports in the front panel provide quick access to connect peripheral devices. Drive Bays The ATX case offers two 5.25" drive bays for optical drives, one of which is installed tool-free. By means of the enclosed 5.25" to 3.5" bay cover & mounting frame, a 3.5" card reader can, for example, be quickly & easily installed into one of the two 5.25" drive bays. Internally, three 3.5" hard drives can be easily installed tool-free. Up to three 2.5" HDD/SSDs can be fitted into the middle HDD cage, while there is also space for an additional 2.5" HDD/SSD on the bottom of the case. Specifications: General: Form Factor: ATX Expansion Slots: 6 Water Cooling Openings: 2 Interior Painting: œ“ Tool-free Devices Installation: œ“ Cable Management System: œ“ Side Panel: Acrylic Color Version: Green Weight: 4.5kg

Dimensions (L x W x H): 44.5 x 20.0 x 43.0 cm I/O: USB (Universal Serial Bus) 3.0 (Front): 2* Audio (Front): œ“ Drive Bays: 5.25": 1 5.25" or 3.5" or 2.5": 1 5.25" to 3.5" Bay Cover: 1 3.5": 3 2.5": 4 Fan Configuration: Front Panel: 2x 120 mm LED Fans (Pre-Installed) Rear Panel: 1x 120 mm LED Fan (Pre-Installed) Compatibility: Mainboard: Mini-ITX, Micro-ATX, ATX Max. Length Graphics Cards: 31.0/38.5 cm** Max. Height CPU Cooler: 16.0 cm Max. Length Power Supply: 25.0 cm Note: * internal 19-pin mainboard connector incl. USB (Universal Serial Bus) 2.0 plug ** with middle HDD cage removed

...