Improved coverage & 10x greater speed than Wireless-G Simultaneous 802.11n support while backward compatible with 802.11g devices Enterprise security features include WPA2, WPA, rogue AP detection & 802.1x with RADIUS support Supports IEEE 802.3af Po E for easy placement in optimal locations
- desktop, wall-mount or ceiling. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

Netgear WNDAP350 is the latest business class access point, offering Dual-Band 802.11n with up to 15 times the speed, up to 600 Mbps & ten times more coverage than legacy networks. The Netgear WNDAP350 access point is designed to allow for wireless networks inside a business & provide the bandwidth needed for services such as Vo IP, video conferencing & other high-bandwidth applications. The Netgear WNDAP350 Access Point supports both point-to-point & point-to-multipoint configurations. Key Features Up to 15x the speed & 10x the coverage of 802.11a, 802.11g networks Operation in 5 GHz radio band to avoid interference from 802.11b or 802.11g network devices Concurrent operation in 2.4 GHz & 5 GHz radio band Backward compatibility with 802.11a, 802.11g & 802.11b network devices Integrated 802.3af Po E eliminates extra cables & enables optimal placement of the access point Comprehensive SNMP functionality for advanced network management Deploy wireless coverage over large areas with point-to-point & point-to-multipoint bridging via Wireless Distribution System (WDS) Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Plenum-rated for safe & convenient placement above drop-down ceilings Metal case

Includes:: Kensington lock slot for anti-theft Internal antennas factory-optimized for maximum RF performance Antenna take-offs enable optional accessory antenna attachment for 2.4 GHz operations Lifetime hardware warranty Netgear WNDAP350 Access Point utilises the 2.4 G Hz & 5 G Hz frequencies to allow more bandwidth for different devices & needs, reduce interference & support speeds up to 600 Mbps! Performance
- Wireless N with Concurrent dual band operation with quality of service Mobility – Up to 15x the speed & 10x the coverage of legacy products Security – Full enterprise security with WAP, WPA2, 802.1x with Radius & built in rogue AP detection Advanced Speed & Range with Comprehensive Internet Security Up to 15x the speed & 10x the coverage of 802.11g networks Concurrent operation in 2.4 GHz & 5 GHz radio band for maximum wireless throughput Backward compatibility with 802.11a, 802.11g & 802.11b network devices Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Support for 802.3af Po E for optimal placement of access point


...

Each port of this NETGEAR Pro SAFE switch automatically detects which speed is needed by the connected device & provides the adequate speed. ...

The XS508M come with Copper Ethernet ports that provide either Fast Ethernet, 1-Gigabit, 2.5-Gigabit, 5-Gigabit or 10-Gigabit connectivity, as well as 1 SFP+ Fiber port with 1-Gigabit or 10-Gigabit connectivity. Each port automatically detects which speed is needed by the connected device & provides the adequate speed. Also, the new NETGEAR Multi-speed switch ports can be connected with regular Cat 5E Ethernet cables, without the need to upgrade to Cat 6 wiring, therefore reducing wiring costs & hassle. ...

- Product Description: NETGEAR Pro SAFE XS708T
- switch
- 8 ports
- smart
- desktop, rack-mountable
- Device Type:




...

The XS716E is the ideal switch for SMBs, considering simple & affordable 10-Gigabit Ethernet connectivity into their 10G-capable servers & storage devices. Customers can use CAT 6 or CAT 7 copper cables with standard RJ-45 Ethernet jacks, that are already widely used in their current network. Network speeds can greatly improve with minimal network changes & upgrades. ...

The XS716T 10-Gigabit Ethernet Smart Managed Switch brings the second generation of 10-Gigabit Copper switching to SMBs. The XS716T is a powerful Smart Managed Switch that

Includes:: 16 ports of 10-Gigabit connectivity (16 copper with 2 shared combo copper/SFP+ Fiber ports). NETGEARs 10-Gigabit Smart Managed Switches are purposely designed as a cost-effective way to provide 10G connections to 10G-capable servers & NAS (Network Attached Storage) systems. The XS716T provides comprehensive L2+/ Layer 3 Lite features (including IPV6 management) allowing SMB customers to deploy virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, which require higher reliability, speed, and performance. It can be used at the "center of a small business network" or as an aggregation/access switch in a larger organization. The XS716T is ideal for smaller workgroups that need high-bandwidth for sharing, collaborating, editing, and publishing high-density content like video or animation.

...

Industry's first 28-port 10-Gigabit Smart Managed Switch, Purposely Designed for SMB with Cost-Effective 10 G Base-T Connectivity & Advanced L2+/ Layer 3 Lite As a leading provider of network equipment for SMBs, NETGEAR understands the importance of a reliable & high performance network to SMB customers. With the growth of virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, SMB networks need to extend beyond simple reliability to higher speed & performance. The 10-Gigabit Smart Managed Switch series from NETGEAR presents the right solution for this requirement; delivering unprecedented non-blocking 10-Gigabit bandwidth at an affordable cost ...

The XS748T 10-Gigabit Ethernet Smart Managed Switch brings the second generation of 10-Gigabit Copper switching to SMBs. The XS748T is a powerful Smart Managed Switch that

Includes:: 44 ports of 10-Gigabit connectivity (44 copper with 4 dedicated 10-Gigabit SFP+ Fiber ports). NETGEARs 10-Gigabit Smart Managed Switches are purposely designed as a cost-effective way to provide 10G connections to 10G-capable servers & NAS (Network Attached Storage) systems. The XS748T provides comprehensive L2+/ Layer 3 Lite features (including IPV6 management) allowing SMB customers to deploy virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, which require higher reliability, speed, and performance. It can be used at the "center of a small business network" or as an aggregation/access switch in a larger organization. The XS748T is ideal for is ideal for expanding network capacity, removing performance bottlenecks and/or support of premise expansion needs.

...

NETGEAR Premium Business 802.11ac 4 x 4 Wave 2 Wireless Access Point, purposely designed for enterprises requiring high density & superior performance. The NETGEAR Premium Business 802.11ac 4 x 4 Wave 2 Wireless Access Point (AP) delivers high performance with maximum client density for enterprises requiring ubiquitous & reliable wireless for all business applications. The WAC740 is a controller managed Access Point with ease of centralized management with all NETGEAR wireless controllers from small (WC7500) to mid-size (WC7600) & large-size (WC9500) deployment. The WAC740 operates with Multi-User MIMO & can achieve speeds up to 600 Mbps for 2.4 GHz & 1.7 Gbps at 5 GHz. The WAC740 is Power over Ethernet enabled & comes with 2 Ethernet ports, including one Multi-Gig port that can handle up to 2.5 Gbps of throughput, enabling a single wire to connect to Multi-Gig capable switch for ease of wiring installation. ...