The NETGEAR M4250 switch series was developed & engineered for audio / video professionals with dedicated service & support. M4250 has been built from the ground up for the growing AV over IP market. AV codecs generally use 1 Gbps or 10 Gbps per stream & the AV Line of M4250 targets the widespread 1 Gbps codecs. Po E+ & rear-facing ports ensure a clean integration in AV racks. M4250 switch comes pre-configured for standard audio & video signals. When requirements are more specific, an AV user interface offers customization with port-based profiles. For audio Dante, Q-SYS & AES67 profiles are available. For video the M4250 offers profiles for NVX, SVSI, Q-SYS, NDI, Dante, as well as audio / video / control mixed profiles. Dedicated AV web-based GUI interface for more specific AV installations Color-based AV profiles can be applied to the different ports Dante, Q-SYS, AES67 & AVB audio profiles NVX, SVSI, Q-SYS, NDI & Dante video profiles Audio / video / control mixed profiles Automatic switch interconnect with NETGEAR IGMP Plus Common Layer 2 & Layer 3 switching engine Built-in IT web GUI, console, Telnet & SSH 8-port 10 / 100 / 1000 Base-T (RJ-45) Po E+ with 125 W Po E budget 2-port 10 / 100 / 1000 Base-T (RJ-45) 2-port 1000 Base-X (SFP) 24 Gbps non-blocking fabric across 12 ports Out-of-band 1G Ethernet management port USB (Universal Serial Bus)-C & RJ-45 RS232 console ports & USB (Universal Serial Bus)-A storage port Rack-mounting standard brackets ...

Netgear GSM4212PX-100EUS Product Key Features • 8 ports Po E+ for multi-switch audio & video deployments. • 8x 1G Po E+ with 240W Po E budget with 2x 1G additional ports & 2x SFP+ 10G fiber uplinks. • Fanless mode possible with max 25 degrees C ambient, 35 degrees C internal sensor & 90W Po E loading. • Quiet mode acoustic noise 27.40d BA@25 degrees C when all ports used & 240W Po E loading. • 1U 200mm deep rackmount with front black display panel & all ports in the back. • Possible reversed mounting with ports in the front including recessed mounting. • Universal mounting options outside the rack with bottom M5 & front M10 threaded holes. • Pre-configured for Audio & Video over IP out of the box. Product Overview AV Line M4250 Series Managed Switches Switching engineered for 1G AV over IP with Po E+, Ultra 90 Po E++ & rear-facing ports ensuring a clean integration in AV racks. M4250 switches come pre-configured for standard audio & video signals. When requirements are more specific, an AV user interface offers customization with port-based profiles. For audio Dante, Q-SYS & AES67 profiles are available, as well as an AVB profile requiring an AVB license sold separately. For video the M4250 offers profiles for NVX, SVSI, Q-SYS, NDI, Dante etc. as well as audio/video/control mixed profiles. When multiple switches, NETGEAR IGMP Plus TM brings automation for you to just connect them together. Product Extended Features • Dedicated AV web-based GUI interface for more specific AV installations. • Color-based AV profiles can be applied to the different ports. • Dante, Q-SYS, AES67 & AVB audio profiles. • AVB requires an AVB4212P-10000S license (sold separately). • NVX, SVSI, Q-SYS, NDI & Dante video profiles. • Audio / video / control mixed profiles. • Automatic switch interconnect with NETGEAR IGMP Plus TM. • Common Layer 2 & Layer 3 switching engine across all M4250 models. • Built-in IT web GUI, console, telnet & SSH consistent with other NETGEAR M4xxx series. • Feature set

Includes:: static, RIP & PIM routing, DHCP Server & PTPv 2. M4250 Support for Audio Video Bridging (AVB) One of the many features designed into the new M4250 product line is full support for Audio Video Bridging (AVB), an industry standard for transporting content over a network. AVB is used most often when very low latency is required such as in live performances when lip sync is critical. All of the AV Line M4250 switches can be optionally licensed for AVB support.

...

Product Features & Technical Details Product Features Product Description: NETGEAR Pro Safe 24 Gigabit Stacking Kit AX742
- expansion
...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. 10 Metre Direct Attach Cable for 10G SFP+ 10m run Active SFP+ connector on both ends replacing SFP+ transceivers Highest performance pre-terminated twin-axial fiber optic cable Low-latency, energy-efficient & low-cost transparent solution ...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. 15 Metre Direct Attach Cable for 10G SFP+ 15m run Active optical SFP+ connector on both ends replacing SFP+ transceivers Highest performance pre-terminated Duplex fiber optic cable Low-latency, energy-efficient & low-cost transparent solution 5-Year NETGEAR Limited Warranty ...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. 5 Metre Direct Attach Cables for 10G SFP+ short run Active SFP+ connector on both ends replacing SFP+ transceivers Highest performance pre-terminated twin-axial cable Low-latency, energy-efficient & low-cost transparent solution 5-Year NETGEAR Limited Warranty ...

AXC765, AXC767, AXC7610, AXC7615 & AXC7620 are new Active or Active Optical DAC versions of 5-meter to 20-meter Direct Attach SFP+ cables for 10G network cabling between SFP+ devices (network switches, servers, storage). These DAC integrate active SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable into a low-latency, energy-efficient & low-cost cabling solution. 7 Metre Direct Attach Cables for 10G SFP+ short run Active SFP+ connector on both ends replacing SFP+ transceivers Highest performance pre-terminated twin-axial cable Low-latency, energy-efficient & low-cost transparent solution 5-Year NETGEAR Limited Warranty ...

SFP+ optic for multimode 50/125µm OM3 or OM4 fiber NETGEAR Pro Safe 10 Gigabit SFP+ transceivers fit into M5300, M7100 & M7300 series standard SFP+ interfaces, providing hot-swappable installation & removal. Select Smart switches & Plus switches will also connect 10 Gigabit SFP+ transceivers. Features 10 Gigabit Ethernet “short range” fiber connectivity LC duplex connector Fits into SFP+ interfaces of M5300, M7100 & M7300 series Managed Switches Fits into SFP+ interfaces of select Smart & Plus Switches Drives 10 Gigabit Ethernet up to 550 m (1, 804 ft) distances with 50/125µm OM4 multimode fiber cables Drives 10 Gigabit Ethernet up to 300 m (984 ft) distances with 50/125µm OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33 m (108 ft) distances with 62.5/125µm OM1/OM2 multimode fiber cables Ordering part number: (1 unit) AXM761-10000S Ordering part number: (pack of 10 units) AXM761P10-10000S ...

The NETGEAR 10GBASE-T SFP+ Transceiver (AXM765) delivers 10G copper connectivity with CAT6a or CAT7 cabling up to 30 meters (98.5 feet) when inserted in a switch SFP+ fiber module slot. The AXM765 fits into SFP+ interfaces of M4300, M5300, M6100, M7100 & M7300 Managed Switches, as well as select Smart Managed Pro & Plus Switches. Compatible with the IEEE 802.3an/bz standard, AXM765 delivers Multi-Gigabit copper connectivity with CAT5e or CAT6 cabling up to 100 meters (92.8 feet) when inserted in Multi-Gigabit SFP+ fiber module slot, or Gigabit copper connectivity when inserted in Gigabit SFP fiber module slot. ...

FULL PROTECTION OF YOUR BUSINESS DATA WITH INSTANT VPN & INTEGRATED FIREWALL One-step Instant VPN for business protection & remote or site-to-site secure access Easy setup, configuration & instant VPN connectivity from the NETGEAR Insight app or Cloud Portal Stateful Packet Inspection Firewall & easy rule setting for instant protection against intrusion Router setup (DHCP, NAT rules, DMZ ports) from the Insight app or Cloud Portal Full routing capabilities with DHCP, NAT, PPTP, L2TP VPN Business Router with Inter VLAN routing, Support for Qo S & 802.1q VLANs (256) VLAN in VLAN support (Qin Q) for private VLAN tagging in ISP network for an additional layer of isolation & security VPN with SSL Encryption (DES, 3DES, AES) REMOTE MONITORING & MANAGEMENT FROM NETGEAR INSIGHT The Insight Instant VPN Router is fully monitored & managed through NETGEAR Insight either locally or remotely. NETGEAR Insight provides: The VPN Router hardware status, temperature, port speeds, CPU load, memory utilization The VPN connection status – connected/disconnected, number of connected users, method of authentication, current traffic, visited destination from guest portal, sites connected (for site-to-site VPN), volume of data exchanged Firewall rule configuration & update, NAT traversal, port forwarding, FTP WARRANTY & SUPPORT 5-year NBD hardware warranty Next Business Day replacement 90 day phone/chat support ...