Get in the game with Hyper X FURY. Even newbies get up to speed fast, since Fury automatically recognises its host platform & automatically overclocks to up to 1866 MHz*, providing plenty of power for your next death match. Furys asymmetric heatspreader design lets you stand out from the crowd. Its available in black, blue, red & for the first time in the Hyper X line
- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. Its 100 per cent tested & LAN-ready plus its backed by free technical support. * Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturers system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturers BIOS. SPECIFICATIONS CL (IDD) 10 cycles Row Cycle Time (t R Cmin) 48.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 37.5ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 800 M Hz f CK for 1600 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component



...

Get in the game with Hyper X FURY. Even newbies get up to speed fast, since FURY automatically recognises its host platform & automatically overclocks to up to 1866 M Hz, providing plenty of power for your next death match. FURY's asymmetric heatspreader design lets you stand out from the crowd. It's available in black, blue, red & -- for the first time in the Hyper X line -- white, with a black PCB. So your rig can reflect your style & you can show it off with pride. It's 100-percent tested & LAN-ready plus it's backed by free technical support. Hyper X Pn P memory will run in most DDR3 systems up to the speed allowed by the manufacturer's system BIOS. Pn P cannot increase the system memory speed faster than is allowed by the manufacturer's BIOS. Hyper X FURY is available in frequency speeds from 1333 M Hz to 1866 M Hz. Reach faster speeds & higher capacities by just installing the memory, no adjustments in BIOS needed. No matter if you are an Intel or AMD gamer, the Hyper X FURY is ideal for you. To make sure it works, Hyper X FURY has been tested with popular brands of motherboards. Does your system have enough memory to get you into the game? Kits are available to max out your system's memory with up to 16GB of high-performance goodness. ...

SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...

SPECIFICATIONS CL (IDD) 9 cycles Row Cycle Time (t R Cmin) 49.125ns (min.) Refresh to Active/ Refresh 260ns (min.) Command Time (t RFCmin) Row Active Time (t RASmin) 36ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to 85oC Storage Temperature -55oC to +100oC * Power will vary depending on the SDRAM used. FEATURES • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply • VDDQ = 1.5V (1.425V ~ 1.575V) • 667 M Hz f CK for 1333 Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 9, 8, 7, 6 • Programmable Additive Latency: 0, CL
- 2, or CL
- 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with t CCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.180” (30.00mm), single sided component


...

Attack the competition with Hyper X Savage memory. Its unique, asymmetrical red heat spreader is made from high-quality aluminum & has a black PCB & a diamond cut finish to make your game shine & help you stand out in the crowd. The heat spreader dissipates heat so your system stays cool & reliable & its low profile fits under oversized CPU coolers. Featuring a design that works well with the latest trends in gaming, Hyper X Savage comes in a wide range of high-performance speeds, from 1600 M Hz to 2400 M Hz, & capacities from 4GB to 8GB in single modules & 8GB to 32GB kits. In CL9-CL11 latencies, it delivers ultra-responsive multitasking & an overall faster system. Dual & quad channel kits are available. Built-in, h&-tuned XMP profiles let users reach higher-performing frequencies, timings & voltages simply by enabling Intel's XMP tool. Even noobs can overclock their platforms with no need for manual adjustments in BIOS. Hyper X Savage is backed by a lifetime warranty & free technical support. ...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

Protect your organization's portable data with Kingston's ultra-secure Data Traveler 4000 USB (Universal Serial Bus) flash drive. It's FIPS 140-2 Level 2 certified & features 256-bit AES hardware-based encryption in CBC mode. Complex password protection enforces device lockdown after a specified number of invalid attempts. Data Traveler 4000 is rugged & waterproof, with a titanium-coated, stainless steel casing for added protection. It's easy to set up & use, with no admin rights or application installation required. ...

Kingston’s UV500 family of solid-state drives dramatically improves the responsiveness of your existing system with incredible boot, loading & transfer times compared to mechanical hard drives. Powered by a Marvell Dean controller combined with 3D NAND Flash for read & write speeds up to 520MB/s & 500MB/s, this SSD is 10X faster than a traditional hard drive for better performance, ultra-responsive multi-tasking & an overall faster system. UV500 provides end-to-end data protection, supports 256-bit AES hardware-based encryption & TCG Opal 2.0 security management solutions. More reliable & durable than a hard drive, UV500 is built with NAND Flash semiconductor memory. There are no moving parts, making it a lot less less likely to fail than a mechanical hard drive. It is also cooler & quieter, & its shock & vibration resistance makes it absolutely ideal for notebooks & other mobile computing devices. UV500 is available in multiple capacities from 120GB–960GB, so you can buy one to use as a boot drive, or take advantage of the larger capacities to store videos, photos & host your most frequently used applications. Specifications Form factor: 2.5”/M.2 2280/m SATA Interface: SATA Rev. 3.0 (6 Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3 Gb/s) Capacities: 120GB, 240GB, 480GB, 960GB Controller: Marvell Dean Controller NAND: 3D TLC Encryption: Encryption Support (AES 256-bit) Power Consumption: 0.195W Idle / 0.5W Avg / 1.17W (MAX) Read / 2.32 W (MAX) Write Dimensions: 80mm x 22mm x 3.5mm (M.2) Operating temperature: 0°C~70°C Storage temperature: -40°C~85°C Vibration operating: 2.17G Peak (7–800 Hz) Vibration non-operating: 20G Peak (10–2000 Hz) Life expectancy: 1 million hours MTBF Warranty/support: Limited 5-year warranty with free technical support Sequential Read/ Write: 120GB — up to 520/320MB/s 240GB — up to 520/500MB/s 480GB — up to 520/500MB/s 960GB — up to 520/500MB/s Maximum 4K Read/ Write: 120GB — up to 79, 000/18, 000 IOPS 240GB — up to 79, 000/25, 000 IOPS 480GB — up to 79, 000/35, 000 IOPS 960GB — up to 79, 000/45, 000 IOPS Weight: 120GB — 480GB — 41g (2.5”) 960GB — 57g (2.5”) 120GB — 6.6g (M.2) 240GB — 6.7g (M.2) 480GB — 7.7g (M.2) 120GB — 6.2g (m SATA) 240GB — 480GB — 6.7g (m SATA) Total Bytes Written (TBW): 120GB — 60TB 240GB — 100TB 480GB — 200TB 960GB — 480TB ...

Kingston’s UV500 family of solid-state drives dramatically improves the responsiveness of your existing system with incredible boot, loading & transfer times compared to mechanical hard drives. Powered by a Marvell Dean controller combined with 3D NAND Flash for read & write speeds up to 520MB/s & 500MB/s, this SSD is 10X faster than a traditional hard drive for better performance, ultra-responsive multi-tasking & an overall faster system. UV500 provides end-to-end data protection, supports 256-bit AES hardware-based encryption & TCG Opal 2.0 security management solutions. More reliable & durable than a hard drive, UV500 is built with NAND Flash semiconductor memory. There are no moving parts, making it a lot less less likely to fail than a mechanical hard drive. It is also cooler & quieter, & its shock & vibration resistance makes it absolutely ideal for notebooks & other mobile computing devices. UV500 is available in multiple capacities from 120GB–960GB, so you can buy one to use as a boot drive, or take advantage of the larger capacities to store videos, photos & host your most frequently used applications. Specifications Form factor: 2.5”/M.2 2280/m SATA Interface: SATA Rev. 3.0 (6 Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3 Gb/s) Capacities: 120GB, 240GB, 480GB, 960GB Controller: Marvell Dean Controller NAND: 3D TLC Encryption: Encryption Support (AES 256-bit) Power Consumption: 0.195W Idle / 0.5W Avg / 1.17W (MAX) Read / 2.32 W (MAX) Write Dimensions: 80mm x 22mm x 3.5mm (M.2) Operating temperature: 0°C~70°C Storage temperature: -40°C~85°C Vibration operating: 2.17G Peak (7–800 Hz) Vibration non-operating: 20G Peak (10–2000 Hz) Life expectancy: 1 million hours MTBF Warranty/support: Limited 5-year warranty with free technical support Sequential Read/ Write: 120GB — up to 520/320MB/s 240GB — up to 520/500MB/s 480GB — up to 520/500MB/s 960GB — up to 520/500MB/s Maximum 4K Read/ Write: 120GB — up to 79, 000/18, 000 IOPS 240GB — up to 79, 000/25, 000 IOPS 480GB — up to 79, 000/35, 000 IOPS 960GB — up to 79, 000/45, 000 IOPS Weight: 120GB — 480GB — 41g (2.5”) 960GB — 57g (2.5”) 120GB — 6.6g (M.2) 240GB — 6.7g (M.2) 480GB — 7.7g (M.2) 120GB — 6.2g (m SATA) 240GB — 480GB — 6.7g (m SATA) Total Bytes Written (TBW): 120GB — 60TB 240GB — 100TB 480GB — 200TB 960GB — 480TB ...

SIMPLE CONNECTION Making every step from easy set-up through to accessing entertainment outside of your TV simpler. EASY SETUP Allowing you to enjoy your Smart TV quicker with a simple & intuitive step-by-step guide. INPUT ASSIST* Detects your external devices such as Blu-ray™ Player, Home Cinema System, Soundbar, games consoles, & USB (Universal Serial Bus) sticks, & displays them on your LGSmart with a simple pop-up. * Service coming to the UK in Summer 2014. SIMPLE SWITCHING Switch between live TV, apps & your external devices, all from one place wherever you are whilst using LG’s intuitive Magic Remote. LAUNCHER Simply click on the Home button to access the launcher menu at the bottom of the screen & switch between recently accessed programmes, apps & connected devices without interrupting what you are watching. SIMPLE DISCOVERY Access a growing world of smart entertainment. LIVE MENU Find the right channel & access detailed programme information with ease. Don’t miss out on the most popular TV shows & movies with recommendations from the Live Menu or search to find what you want to watch now or in the future. LGSTORE The LGStore combines entertainment from live TV, on dem&, 3D content, recommendations, & apps all in one place so you can always find something to watch. SIMPLE ENTERTAINMENT Bringing together all of your favourite entertainment services, enjoy catch-up TV from BBC i Player & Demand 5, as well as instant access to movies on demand via Sky Movies on NOW TV, Netflix, Amazon Instant & Blinkbox. Stream live sports via Sky Sports on NOW TV, Eurosport, BBC Sport & ESPN Player, access music from Spotify & Napster, & watch the latest videos on You Tube.* * Services are subject to availability & may vary across products & platforms. Due to platform upgrades some services require modification before launching on 2014 devices. CINEMA 3D Enjoy CINEMA 3D in greater comfort with light, battery-free, & affordable 3D glasses. IPS PANEL With LG’s unique IPS panel enjoy perfect colour, clarity & contrast, from every seat in the room. BUILT-IN WI-FI LGSmart TV comes with built in Wi-Fi for seamless connectivity.* * Available on selected models. MAGIC REMOTE READY Access a growing world of entertainment on your LGSmart TV with the intuitive Magic Remote using point, scroll, gesture or voice commands.* * Additional Magic Remote required. Technical

Specification Display

Size: 42” Resolution: 1920 x 1080 Full HD 1080p LED Micro Pixel Control (Local Dimming) 3D Spec 3D Type: FPR Format: S/S, T/B, C/B, F/S 2D to 3D 3D to 2D 2D to 3D Depth Control: 0~+20 (default: 10) 2D to 3D Viewpoint Control: -10~+10 (default: 0) 2D to 3D mode: 5 modes (Standard, Manual, Cinema, Sport, Extreme) 3D Depth Control 3D Viewpoint control: -10~+10 (default: 0) 3D Picture Mode 3D Image Correction Format Auto Detection Dual Play: Ready Video Triple XD Engine Tru Black Control Aspect Ratio Correction: 8 modes (16:9, Just scan, Original, Full Wide, 4:3, 14:9, Cinema Zoom 1, Zoom) Just Scan: (HDMI/ Component/RF) 1080i / 1080p / 720p Real Cinema 24p Resolution Upscaler Active Noise Reduction Tru Colour Generator Dynamic Clear White Dynamic Colour Enhancer Smart Picture Mode Picture Mode: 8 Mode (Vivid/ Standard/ Eco/ Cinema/ Game/ Photo/isf Expert 1/isf Expert 2) Picture Wizard II H.264 / HEVC Codec: 2K/60p Audio Mono/ Stereo/ Dual (MTS/SAP) DTS Decoder Audio Output: 10W + 10W 2 Ch Speaker system Dolby Digital Decoder 3D Sound Zooming Virtual Surround Plus Sound Status Mode: 6 modes (Standard, News, Music, Cinema, Sport, Game) Smart Sound Mode Sound Optimizer: 3 modes (Off, Stand Type, Wall-mounted Type) Clear Voice 2 Optical Sound Sync Wireless Sound Sync Apt-X Encoder Smart TV (Webos) Launcher (Recent / Home / My apps) LGStore Live Menu: Recommended, Channels, Search, Recorded Special Features Motion Eye Care EPG (SI) Input Labelling e-Manual VESA 400 x 400 Interfaces USB (Universal Serial Bus) 2.0 x 3 HDMI 1.4 x 3 CI Slot x 1 ARC port x 1 RF in SCART x 1 Composite In (CVBS + Audio) x 1-Sharing with Component Component in (Y, Pb, Pr) + Audio x 1 Digital Audio Out x 1 (optical) PC Audio Input – Share with AV2 RS-232C (Control / SVC): USB (Universal Serial Bus) to RS232C Headphone out x 1
- Sharing External Speaker out (Analog audio out) & headphone out Connectivity Wi-Fi Built-in Wi-Fi Direct Simplink Power Voltage: 100V ~ 240V, 50/60 Hz USB (Universal Serial Bus) Moving Picture Playback (SD/HD/ Plus HD): Div X HD Picture: JPEG, JPS, MPO External Device App Download Audio Codec: AC3 (Dolby Digital), EAC3, HAAC, AAC, Mpeg, MP3, PCM, DTS

Dimensions (Wx Hx D) With Stand: 960 x 606 x 238mm Without Stand: 960 x 567 x 54.5mm Weight With Stand: 12.1kg Without Stand: 9.6kg ECO Er P Class: Class A+ On Power Consumption: 49W Annual on-mode power: 72k Wh Stand By: 0.30W Luminance ratio: 65%






...