Hyper X Savage Black 16GB Kit DDR4 2666 M Hz Memory (4x 4GB) Hyper X HX426C13SB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit FBGA components. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2666 at a low latency timing of 13-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical & mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile 1: DDR4-2666 CL13-14-14 @1.35V XMP Profile 2: DDR4-2400 CL13-13-13 @1.35V

Features: Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.36” (34.57mm) SPECIFICATIONS CL (IDD) 15 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC



...

Hyper X Savage Black 32GB Kit DDR4 2666 M Hz Memory (4x 8GB) Hyper X HX426C13SB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit FBGA components. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2666 at a low latency timing of 13-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical & mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile 1: DDR4-2666 CL13-14-14 @1.35V XMP Profile 2: DDR4-2400 CL13-13-13 @1.35V

Features: Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.36” (34.57mm) SPECIFICATIONS CL (IDD) 15 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC



...

Hyper X Savage Black 4GB DDR4 2666 M Hz Memory Hyper X HX426C13SB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit FBGA components. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2666 at a low latency timing of 13-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical & mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile 1: DDR4-2400 CL12-13-13 @1.35V XMP Profile 2: DDR4-2133 CL13-13-13 @1.2V

Features: Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.36” (34.57mm) SPECIFICATIONS CL (IDD) 15 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC



...

Hyper X Savage Black 8GB DDR4 2133 M Hz Memory Hyper X HX421C13SBK2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2133 CL13 SDRAM (Synchronous DRAM) 2 Rx 8, memory modules, based on sixteen 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2133 at a low latency timing of 13-13-13 at 1.2V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical & mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile 1: DDR4-2133 CL13-13-13 @1.2V

Features: Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.36” (34.57mm) SPECIFICATIONS CL (IDD) 15 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC



...

Hyper X Savage Black 8GB DDR4-2666 CL13 288-Pin DIMM Memory Description Hyper X HX426C13SB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 2 Rx 8, memory module, based on sixteen 512M x 8-bit FBGA components. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2666 at a low latency timing of 13-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical & mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile 1: DDR4-2666 CL13-14-14 @1.35V XMP Profile 2: DDR4-2400 CL13-13-13 @1.35V SPECIFICATIONS CL (IDD) 15 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) TBD W* Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC Power will vary depending on the SDRAM used. FEATURES Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.36” (34.57mm)

...

Hyper X Savage Black 8GB Kit DDR4 2666 M Hz Memory (2x 4GB) Hyper X HX426C13SB/4 is a 512M x 64-bit (4GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1 Rx 8, memory module, based on eight 512M x 8-bit FBGA components. Each module supports Intel XMP (Extreme Memory Profiles). Each module has been tested to run at DDR4-2666 at a low latency timing of 13-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical & mechanical specifications are as follows: XMP TIMING PARAMETERS JEDEC: DDR4-2133 CL15-15-15 @1.2V XMP Profile 1: DDR4-2666 CL13-14-14 @1.35V XMP Profile 2: DDR4-2400 CL13-13-13 @1.35V

Features: Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP
- 2.5V Typical VDDSPD = 2.25V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4 (Burst Chop) Height 1.36” (34.57mm) SPECIFICATIONS CL (IDD) 15 cycles Row Cycle Time (t R Cmin) 46.5ns (min.) Refresh to Active/ Refresh Command Time (t RFCmin) 260ns (min.) Row Active Time (t RASmin) 33ns (min.) Maximum Operating Power TBD W* UL Rating 94 V
- 0 Operating Temperature 0oC to +85oC Storage Temperature -55oC to +100oC



...

The Hyper X SAVAGE EXO SSD uses 3D NAND technology to deliver SSD speeds more reliably & efficiently than 2D NAND so you can get your games patched, installed & booted faster. Slash load times with a drive that’s up to 20% faster than today’s game systems 1. The SAVAGE EXO is easy to connect, works with both Mac & PC, & can be used on your Play Station 4 or Xbox One™ via the USB (Universal Serial Bus) 3.1 Gen 2 connection 2. Weighing in at a trivial 56g, the super-compact SAVAGE EXO is the perfect solution for lightning-quick storage & transfer on the go. Features Lightning-quick transfer speeds Simple connectivity for Windows & Mac Compatible with XBOX One & PS4 via USB (Universal Serial Bus) 3.1 Gen 2 Light, portable & compact Key Features Load console games up to 20% faster Up to a 20% increase in speed on today’s consoles. Simple to connect Easily connect to your Windows PC or Mac. Plug & Play for easy access to games anywhere Store your library of Xbox One 3 & Playstation 4 games & take them with you. Light & portable Weighing in at a miniscule 56g, the SAVAGE EXO is as portable as it gets! Specifications Interface: USB (Universal Serial Bus) 3.1 Gen 2 Type C Capacities: 480GB, 960GB NAND: 3D TLC Sequential read/write: 480GB-960GB – up to 500/480MB/s Power consumption: 5v 900m A Dimensions: 123.82mm x 48.61mm x 10.24mm Operating temperature: 0°C~70°C Storage temperature: -40°C~85°C Weight: 56g Vibration operating: 2.17G peak (7–800 Hz) Vibration non-operating: 20G peak (10–2000 Hz) Life expectancy: 1 million hours MTBF Warranty/support: Limited 3-year warranty with free technical support ...

The Hyper X SAVAGE EXO SSD uses 3D NAND technology to deliver SSD speeds more reliably & efficiently than 2D NAND so you can get your games patched, installed & booted faster. Slash load times with a drive that’s up to 20% faster than today’s game systems 1. The SAVAGE EXO is easy to connect, works with both Mac & PC, & can be used on your Play Station 4 or Xbox One™ via the USB (Universal Serial Bus) 3.1 Gen 2 connection 2. Weighing in at a trivial 56g, the super-compact SAVAGE EXO is the perfect solution for lightning-quick storage & transfer on the go. Features Lightning-quick transfer speeds Simple connectivity for Windows & Mac Compatible with XBOX One & PS4 via USB (Universal Serial Bus) 3.1 Gen 2 Light, portable & compact Key Features Load console games up to 20% faster Up to a 20% increase in speed on today’s consoles. Simple to connect Easily connect to your Windows PC or Mac. Plug & Play for easy access to games anywhere Store your library of Xbox One 3 & Playstation 4 games & take them with you. Light & portable Weighing in at a miniscule 56g, the SAVAGE EXO is as portable as it gets! Specifications Interface: USB (Universal Serial Bus) 3.1 Gen 2 Type C Capacities: 480GB, 960GB NAND: 3D TLC Sequential read/write: 480GB-960GB – up to 500/480MB/s Power consumption: 5v 900m A Dimensions: 123.82mm x 48.61mm x 10.24mm Operating temperature: 0°C~70°C Storage temperature: -40°C~85°C Weight: 56g Vibration operating: 2.17G peak (7–800 Hz) Vibration non-operating: 20G peak (10–2000 Hz) Life expectancy: 1 million hours MTBF Warranty/support: Limited 3-year warranty with free technical support ...

Hyper X has the Skyn to win with two mouse pad textures available individually or in a dual pack. Choose the control surface for increased gaming accuracy or the speed surface for fast-moving action. Both are ideal for everyone from noobs to pros & feature ultra-thin, anti-microbial material designed to keep you winning for hours. Hyper X Skyn works with optical, wireless or laser mice & sticks to most surfaces for high performance at home or on the road. ...

Hyper X has the Skyn to win with two mouse pad textures available individually or in a dual pack. Choose the control surface for increased gaming accuracy or the speed surface for fast-moving action. Both are ideal for everyone from noobs to pros & feature ultra-thin, anti-microbial material designed to keep you winning for hours. Hyper X Skyn works with optical, wireless or laser mice & sticks to most surfaces for high performance at home or on the road. ...