This HP switch offers more choice & flexibility for smaller organizations that require ease of use, while delivering better network performance. It is smart-managed, fixed configuration, Gigabit Ethernet switch in an easy-to-administer solution that has the advanced energy-saving capabilities. ...

HP 1820 Switch Series devices are basic, smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches designed for small businesses looking for key features in an easy-to-administer solution. All 1820 Switches support flexible installation options, including mounting on wall, under table, or on desktop. The 8-port Gigabit Ethernet model can be powered by an upstream Power over Ethernet (Po E) switch for environments where no line power is available. These Gigabit switches are plug-&-play out of the box, yet network operation can be fine-tuned through features available from a simple Web browser-based GUI, if necessary. Customizable features include VLANs, Rapid Spanning Tree, IGMP Snooping, link aggregation trunking, and DSCP Qo S policies. All models include the latest energy-saving capabilities, including Energy Efficient Ethernet (EEE) & idle-port power down. ...

The HP 1820 Switch Series offers more choice & flexibility for smaller organizations that require ease of use & lower TCO, while delivering better network performance with an enhanced user experience. HP 1820 Switch Series devices are smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches with basic features in an easy-to-administer solution. The series

Includes:: 8-, 24- & 48-port non-Po E & Po E+ Gigabit Ethernet models. Specific models include SFP ports for fiber connectivity. Some models are fanless, making them ideal for office deployments.

...

- Product Description: HPE 1820-8G-Po E+ (65W)
- switch
- 8 ports
- Managed
- desktop, rack-mountable
- Device Type:




...

Broadcast control Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Rate limiting Sets per-port ingress enforced maximums & per-port, per-queue guaranteed minimums. Traffic prioritization Provides time sensitive packets priority based on DSCP or 802.1p classification. Packets will be mapped to four hardware queues for optimum throughput. Single IP management Enables management of up to 32 HP 1910 devices using a single web interface;simplifies management of multiple devices. Secure web GUI Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. Complete session logging Provides detailed information for problem identification & resolution. Dual flash images Dual flash images provide independent primary & secondary operating system files for backup while upgrading. Port mirroring Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring. Network Time Protocol (NTP) Synchronizes timekeeping among distributed time servers & clients;keeps consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time. IEEE 802.1AB Link Layer Discovery Protocol (LLDP) Automated device discovery protocol provides easy mapping by network management applications. Limited CLI Enables users to quickly deploy & troubleshoot devices in the network. RMON Provides advanced monitoring & reporting capabilities for statistics, history, alarms, and events. Auto-MDI/MDIX Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. IEEE 802.3x flow control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. Cable diagnostics Remotely detect cable issues using a browser-based tool. IGMP snooping Multicast filtering improves network performance, instead of flooding traffic to all ports. Fiber uplink Provides greater distance connectivity using Gigabit fiber uplinks. BPDU filtering Drops BPDU packets when STP is enabled globally but disabled on a specific port. DHCP relay Simplifies management of DHCP addresses in networks with multiple subnets. STP BPDU port protection Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks. STP root guard Protects the root bridge from malicious attacks or configuration mistakes. Automatic denial-of-service protection Monitors for malicious attacks & protects the network by blocking the attacks. LLDP-MED (Media Endpoint Discovery) LLDP-MED is a standard extension of LLDP that stores values for parameters such as Qo S & VLAN to automatically configure network devices such as IP phones. Auto voice VLAN Recognizes IP phones & automatically assigns voice traffic to dedicated VLAN for IP phones. Main Specifications
- Product Description: HPE 1910-24 Switch
- switch
- 24 ports
- Managed
- rack-mountable
- Device Type: Switch
- 24 ports
- L3
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 24 x 10/ 100 + 2 x combo Gigabit SFP
- Capacity: Routing table entries:32
- Routing Protocol: Static IPv 4 routing, static IPv 6 routing
- Remote Management Protocol: SNMP 1, RMON 2, SNMP, SNMP 3, SNMP 2c, HTTP, HTTPS
-

Features: Flow control, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Do S attack prevention, port mirroring, IPv 6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Jumbo Frames support, MLD snooping, Cable Diagnostics Function, STP Root Guard, IPv 4 support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), dual firmware images, NTP time synchronisation, link aggregation trunking, packet storm protection
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
- Manufacturer Warranty: Limited lifetime warranty




















...

Broadcast control Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Rate limiting Sets per-port ingress enforced maximums & per-port, per-queue guaranteed minimums. Traffic prioritization Provides time sensitive packets priority based on DSCP or 802.1p classification. Packets will be mapped to four hardware queues for optimum throughput. Single IP management Enables management of up to 32 HP 1910 devices using a single web interface;simplifies management of multiple devices. Secure web GUI Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. Complete session logging Provides detailed information for problem identification & resolution. Dual flash images Dual flash images provide independent primary & secondary operating system files for backup while upgrading. Port mirroring Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring. Network Time Protocol (NTP) Synchronizes timekeeping among distributed time servers & clients;keeps consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time. IEEE 802.1AB Link Layer Discovery Protocol (LLDP) Automated device discovery protocol provides easy mapping by network management applications. Limited CLI Enables users to quickly deploy & troubleshoot devices in the network. RMON Provides advanced monitoring & reporting capabilities for statistics, history, alarms, and events. Auto-MDI/MDIX Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. IEEE 802.3x flow control Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. Cable diagnostics Remotely detect cable issues using a browser-based tool. IGMP snooping Multicast filtering improves network performance, instead of flooding traffic to all ports. Fiber uplink Provides greater distance connectivity using Gigabit fiber uplinks. BPDU filtering Drops BPDU packets when STP is enabled globally but disabled on a specific port. DHCP relay Simplifies management of DHCP addresses in networks with multiple subnets. STP BPDU port protection Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks. STP root guard Protects the root bridge from malicious attacks or configuration mistakes. Automatic denial-of-service protection Monitors for malicious attacks & protects the network by blocking the attacks. LLDP-MED (Media Endpoint Discovery) LLDP-MED is a standard extension of LLDP that stores values for parameters such as Qo S & VLAN to automatically configure network devices such as IP phones. Auto voice VLAN Recognizes IP phones & automatically assigns voice traffic to dedicated VLAN for IP phones. Main Specifications
- Product Description: HPE 1910-8 Switch
- switch
- 8 ports
- Managed
- rack-mountable
- Device Type: Switch
- 8 ports
- L3
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 8 x 10/ 100 + 2 x combo Gigabit SFP
- Performance: Throughput:4.2 Gbps Capacity IPv 4 routing table entries:32 IPv 6 routing table entries:32
- MAC Address Table

Size: 8192 entries
- Routing Protocol: Static IPv 4 routing, static IPv 6 routing
- Remote Management Protocol: SNMP 1, RMON 2, SNMP, SNMP 3, SNMP 2c, HTTP, HTTPS
-

Features: Flow control, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Do S attack prevention, port mirroring, IPv 6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Jumbo Frames support, MLD snooping, Cable Diagnostics Function, STP Root Guard, IPv 4 support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), dual firmware images, NTP time synchronisation, link aggregation trunking, packet storm protection
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.6 cm x 16.2 cm x 4.4 cm
- Weight: 1kg
- Manufacturer Warranty: Limited lifetime warranty

























...

Broadcast control It allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic. Rate limiting It sets per-port ingress enforced maximums & per-port, per-queue guaranteed minimums. Traffic prioritization It provides time sensitive packets priority based on DSCP or 802.1p classification. Packets will be mapped to four hardware queues for optimum throughput. Secure web GUI It provides a secure, easy-to-use graphical interface for configuring the module via HTTPS. Complete session logging It provides detailed information for problem identification & resolution. Dual flash images Dual flash images provide independent primary & secondary operating system files for backup while upgrading. Port mirroring It enables traffic on a port to be simultaneously sent to a network analyzer for monitoring. Network Time Protocol (NTP) Synchronizes timekeeping among distributed time servers & clients;keeps consistent timekeeping among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time. IEEE 802.1AB Link Layer Discovery Protocol (LLDP) Automated device discovery protocol provides easy mapping by network management applications. Limited CLI It enables users to quickly deploy & troubleshoot devices in the network. RMON It provides advanced monitoring & reporting capabilities for statistics, history, alarms, and events. Auto-MDI/MDIX Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports. IEEE 802.3X flow control It provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node. IEEE 802.3af Power over Ethernet (Po E) ready PWR models can provide up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more. Cable diagnostics Remotely detect cable issues using a browser-based tool. IGMP snooping Multicast filtering improves network performance, instead of flooding traffic to all ports. Fiber uplink It provides greater distance connectivity using Gigabit fiber uplinks. BPDU filtering It drops BPDU packets when STP is enabled globally but disabled on a specific port. DHCP relay It simplifies management of DHCP addresses in networks with multiple subnets. STP BPDU port protection It blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks. STP root guard It protects the root bridge from malicious attacks or configuration mistakes. Automatic denial-of-service protection It monitors for malicious attacks & protects the network by blocking the attacks. LLDP-MED (Media Endpoint Discovery) LLDP-MED is a standard extension of LLDP that stores values for parameters such as Qo S & VLAN to automatically configure network devices such as IP phones. Po E allocations They support multiple methods to allocate Po E power for more efficient energy savings. Auto voice VLAN It recognizes IP phones & automatically assigns voice traffic to dedicated VLAN for IP phones. Main Specifications
- Product Description: HPE 1910-8-Po E+ Switch
- switch
- 8 ports
- Managed
- rack-mountable
- Device Type: Switch
- 8 ports
- L3
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 8 x 10/ 100 (Po E) + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E
- Capacity: Routing table entries:32
- Routing Protocol: Static IPv 4 routing, static IPv 6 routing
- Remote Management Protocol: SNMP 1, RMON 2, SNMP, SNMP 3, SNMP 2c, HTTP, HTTPS
-

Features: Flow control, Layer 3 switching, Layer 2 switching, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Do S attack prevention, port mirroring, IPv 6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Jumbo Frames support, MLD snooping, Cable Diagnostics Function, STP Root Guard, IPv 4 support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), dual firmware images, NTP time synchronisation, link aggregation trunking, packet storm protection
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
- Manufacturer Warranty: Limited lifetime warranty





















...

The HP 1920 Switch Series, part of the HP Office Connect portfolio, is designed for smaller organizations dealing with bandwidth-demanding applications. The switches are ideal for environments that require advanced features for granular control & where smart-managed flexibility is a must for easy network configuration & management. The switches deliver advanced smart-managed fixed configuration Gigabit switches that build on the marketing-leading price/performance of the HP 1910 Switch Series. They feature a new 48-port Po E+ model, IPv 6 support & advanced silicon technology. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HP 1920 Switch Series, part of the HP Office Connect portfolio, is designed for smaller organizations dealing with bandwidth-demanding applications. The switches are ideal for environments that require advanced features for granular control & where smart-managed flexibility is a must for easy network configuration & management. The switches deliver advanced smart-managed fixed configuration Gigabit switches that build on the marketing-leading price/performance of the HP 1910 Switch Series. They feature a new 48-port Po E+ model, IPv 6 support & advanced silicon technology. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Simplifies network deployment & management for small organizations The HP 1920 switch series, ideal for small organizations features easy-to-use, out of the box, plug-&-play deployment. These smart-managed switches use an intuitive Web management interface to simplify deployment & management while offering you greater granularity of control of key features. Keeps your business up & running & protected The HP 1920 switch series is built on the proven reliability with advanced silicon technology for lower power consumption & an enhanced feature set for more robust operation. Enhanced security features guard your network from unwanted or unauthorized access. Management security restricts access to critical configuration commands, offers multiple privilege levels with password protection & supports secure http (https). Delivers enhanced performance, while lowering the total cost of ownership The HP 1920 switch series delivers advanced functionality in smart-managed switches. Smaller enclosures facilitate flexible deployment. The switch series

Includes:: Po E+ to power IP devices without the cost of additional cabling. Advanced silicon technology, green features like Port shutdown & EEE compliance for greater energy efficiency significantly reduce TCO. Main Specifications
- Product Description: HPE 1920-48G-Po E+
- switch
- 48 ports
- Managed
- desktop, rack-mountable
- Device Type: Switch
- 48 ports
- L3
- Managed
- Enclosure Type: Desktop, rack-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/ 100/ 1000 (Po E+) + 4 x Gigabit SFP
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 370 W
- Performance: Throughput:77.4 Mpps Routing/ switching capacity:104 Gbps
- Capacity: IPv 4 routing table entries:32 IPv 6 routing table entries:32
- MAC Address Table

Size: 16384 entries
- Jumbo Frame Support: 10KB
- Routing Protocol: Static IPv 4 routing, static IPv 6 routing
- Remote Management Protocol: SNMP 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, CLI
-

Features: Flow control, Layer 2 switching, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, port mirroring, Weighted Round Robin (WRR) queuing, IPv 6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (Qo S), Jumbo Frames support, MLD snooping, Cable Diagnostics Function, STP Root Guard, DHCP relay, Port Security, DHCP client, dual firmware images, Strict Priority Queuing (SPQ), port isolation, static routing, Class of Service (Co S), Single IP Management (SIM)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 44 cm x 44 cm x 4.4 cm
- Weight: 4.3kg
- Manufacturer Warranty: Limited lifetime warranty































...