Powerful Switching for your Business The DGS-1100 Series is a range of powerful switches that offer a lot of bang for your buck. They are great for busy SMBs who expect a lot of their network, including support for surveillance & Vo IP. They are packed with traffic management & optimization features that keep your network congestion free. Meanwhile, management tools are flexible & intuitive, making your life easier. Easy to Use & Easy to Install D-Link Network Assistant Utility (DNA) can quickly discover & do initial setup for D-Link Networking devices such as the DGS-1100 Series, which greatly improves efficiency for solution deployment. VLANs: Stronger Security & Better Traffic Management Relatively easy to set up, VLANs can be a big boon for your network. They can isolate sensitive areas of your network, keeping them safe from those with malicious intent, or keeping bandwidth open for latency-sensitive traffic such as Vo IP. For Voice If Vo IP calls make up a large slice of your network usage, separating them onto their own VLAN can ensure they get the bandwidth they need for smooth conversations without lag or jitters. For Surveillance If you have surveillance cameras & devices attached to your network, putting them onto their own VLAN keeps surveillance footage running seamlessly. At the same time, it can help prevent a variety of malicious attacks by restricting access to different network areas. Green Technology D-Link Green technology enables the DGS-1100 Smart Managed Switches to save power without sacrificing performance. Most of the models in the series utilize a fanless design, for silent & energy-efficient operation. All are IEEE 802.3az-compliant & feature Link Status detection & Time-Based Po E. ...

D-Link’s DGS-1100 Series provide an affordable solution for SOHOs & Small & Medium Businesses as well as enterprise deployment, such as in branch offices & meeting rooms that require simple network management. Each model comes in a compact desktop-sized metal case & features either 8, 16, 16+2 SFP, 24, 24+2 SFP, or 8 Po E & 24 with 12 Po E enabled Gigabit ports. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Qo S & bandwidth control The DGS-1100 switch supports auto surveillance VLAN (ASV), and auto voice VLAN, which are optimally suited for Vo IP & video surveillance deployments. Auto surveillance VLAN consolidates data & surveillance video transmission through a single DGS-1100 switch, thus sparing businesses the expense of dedicated hardware & facilities. ASV also ensures the quality of real-time video for monitoring & control without compromising the transmission of conventional network data. The auto voice VLAN technology enhances the Vo IP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority & individual VLAN, these features guarantee the quality & security of Vo IP traffic. Bandwidth control can reserve bandwidth on a per port basis for important functions that require larger bandwidth or might have high priority. Po E support The DGS-1100 delivers Power over Ethernet (Po E) capabilities, making deployment with IP cameras, Vo IP phones, and access points much easier. Power cords will become a thing of the past, as the DGS-1100 supports a power budget. The 10/100/1000 Base-T Ethernet ports mean that even high-quality video is no problem. Easy troubleshooting The DGS-1100 features loopback detection & cable diagnostics to help network administrators find & solve network problems quickly & easily. Loopback detection is used to detect loops created by a specific port & automatically shut down the affected port. The cable diagnostics feature is designed for network administrators to quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors. Main Specifications
- Product Description: D-Link DGS-1100-26MP
- switch
- 26 ports
- smart
- desktop
- Device Type: Switch
- 26 ports
- smart
- Enclosure Type: Desktop
- Subtype: Gigabit Ethernet
- Ports: 24 x 10/ 100/ 1000 (Po E+) + 2 x Gigabit SFP
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 370 W
- Performance: Switching capacity:52 Gbps
- Capacity: VLAN groups:128
- MAC Address Table

Size: 16K entries
-

Features: VLAN support, Quality of Service (Qo S), bandwidth control, D-Link Green Technology, LACP support, Energy Efficient Ethernet, 6KV Surge protection
- Compliant Standards: IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.3at, IEEE 802.3az





















...

D-Link DGS-1100-26MPV2 26 Ports Manageable Ethernet Switch
- 2 Layer Supported
- Modular
- 370 W Po E Budget
- Optical



...

The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation & helps to extend the device’s lifetime. While the DGS-1210-28P/52/52P feature a smart fan design that powers on after the switch reaches a certain temperature, saving energy & cutting costs without sacrificing performance. Fibre Uplinks The Fibre Uplinks integrate advanced management as well as security functions that provide performance & scalability making it suitable for business use. Energy Saving Incorporating D-Link Green technology, the DGS-1210 Series switches are capable of power-saving without sacrificing operational performance or functionality. Taking the approach to green IT one step further this series incorporates a special chipset with advanced silicon technology for efficient use of energy. ...

The DGS-1210 Series Gigabit Smart Switches with Fibre Uplinks is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart Switches with Fibre Uplinks

Includes:: a range of affordable Po E-enable switches for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1210-08P1 is a 8-port Smart Po E Switch that provides 8 Po E-enabled ports that can supply power of up to 15.4 W each. Whereas the DGS-1210-24P1 is a 24-port Smart Po E Switch that provides 12 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Easy Management The D-Link DGS-1210 series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the D-Link Network Assistant 2 will automatically discover all D-Link Smart Switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The D-Link Network Assistant 1’s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches. Energy Saving Gigabit Smart Switches with Fibre Uplinks are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Auto Surveillance VLAN & Voice VLAN The process of setting up IP surveillance & Vo IP on a network is automated with the D-Link Gigabit Smart Switches with Fibre Uplinks. Auto Surveillance VLAN (ASV) consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality & efficient transmission for all voice communication. Exclusive Layer 2 Features Equipped with a complete line-up of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature is designed primarily for administrators & customer service representatives, & can rapidly discover the type of error & determine the cable quality. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. 1 Available in Q3 2013 2 Supported in future firmware upgrade Specifications Interface Number of 10/100/1000BASE-TX ports
- DGS-1210-16
- 16 ports Number of SFP ports
- DGS-1210-16
- 4 ports Performance Switch Capacity
- DGS-1210-16
- 40 Gbps 64-Byte Packet Forwarding Rate
- DGS-1210-16
- 29.8 Mpps MAC Address Table Size
- 16K Packet Buffer
- 6 MB per device Jumbo Frame
- Up to 13, 000 Bytes Diagnostic LED Indicators DGS-1210-16, DGS-1210-24, DGS-1210-48 Power (per device) Link/ Activity/ Speed (per 10/100/1000 Mbps port) Link/ Activity/ Speed (per SFP port) Physical & Environmental Power Consumption (Standby/ Maximum)
- DGS-1210-16
- 3.6W / 12.1W Power Input
- 10 to 240 VAC, 50/60HZ internal universal power supply

Dimensions (W x D x H)
- DGS-1210-16
- 280 x 180 x 44 mm Size 19-inch standard rackmounting width or with rackmountable brackets 1U Height Ventilation
- DGS-1210-16
- fanless Heat Dissipation
- DGS-1210-16
- 41.26 BTU per hour Temperature Operating: -5° to 50°C (23° to 112°F) Storage: -20° to 70°C (-4° to 158°F ) Humidity Operating: 0% ~ 95% non-condensing Storage: 0% ~ 95% non-condensing Certification
- CE Class A Safety
- c UL, LVD

























...

The DGS-1210-10/10P/20/28 features a fanless design that allows for quieter operation & helps to extend the device’s lifetime. While the DGS-1210-28P/52/52P feature a smart fan design that powers on after the switch reaches a certain temperature, saving energy & cutting costs without sacrificing performance. Fibre Uplinks The Fibre Uplinks integrate advanced management as well as security functions that provide performance & scalability making it suitable for business use. Po E The DGS-1210 Series

Includes:: a range of high power budget Po E-enabled switches for businesses looking to power Vo IP phones, wireless access points or network cameras. Energy Saving Incorporating D-Link Green technology, the DGS-1210 Series switches are capable of power-saving without sacrificing operational performance or functionality. Taking the approach to green IT one step further this series incorporates a special chipset with advanced silicon technology for efficient use of energy. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

The DGS-1210 Series Gigabit Smart Switches with Fibre Uplinks is the latest generation of D-Link Smart Switches featuring D-Link Green 3.0 technology. The series offers a high level of energy saving & efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv 6 management & configurations ensures your network remains protected after the upgrade from IPv 4 to IPv 61. By offering multiple management options, the Smart Switches allows quick deployment, infrastructure expansion, & seamless function upgrades. Built for small & medium-sized businesses, the DGS-1210 Series Smart Switches provide functionality, security, & manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart Switches with Fibre Uplinks

Includes:: a range of affordable Po E-enable switches for businesses looking to power Vo IP phones, wireless access points or network cameras. The DGS-1210-08P1 is a 8-port Smart Po E Switch that provides 8 Po E-enabled ports that can supply power of up to 15.4 W each. Whereas the DGS-1210-24P1 is a 24-port Smart Po E Switch that provides 12 Po E-enabled ports that can support up to 30 W of power output following IEEE 802.3at standard. The design allows more flexibility in power allocation for a variety of powered devices with affordable installation costs. Easy Management The D-Link DGS-1210 series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. Furthermore, the web UI contains ten language options to make operations more straightforward. During the first installation, the D-Link Network Assistant 2 will automatically discover all D-Link Smart Switches in the network, allowing administrators to assign IP addresses & the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. The D-Link Network Assistant 1’s important management commands, such as downloading firmware or a configuration file, offer a sophisticated method of batch operations for multiple switches. Energy Saving Gigabit Smart Switches with Fibre Uplinks are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff & standby, LED shutoff, & system hibernation based on custom scheduling profiles. The profiles can also be applied to the Po E switch so that there is no unnecessary power consumption during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections. Auto Surveillance VLAN & Voice VLAN The process of setting up IP surveillance & Vo IP on a network is automated with the D-Link Gigabit Smart Switches with Fibre Uplinks. Auto Surveillance VLAN (ASV) consolidates data & surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic is at their highest levels. Similarly, the Auto Voice VLAN guarantees clear audio quality & efficient transmission for all voice communication. Exclusive Layer 2 Features Equipped with a complete line-up of L2 features, the DGS-1210 Series switches include IGMP Snooping, Port Mirroring, Spanning Tree, & Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection & Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port & automatically shut down the affected port. The Cable Diagnostic feature is designed primarily for administrators & customer service representatives, & can rapidly discover the type of error & determine the cable quality. Secure your Network D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security & protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, & prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment. 1 Available in Q3 2013 2 Supported in future firmware upgrade Specifications Interface Number of 10/100/1000BASE-TX ports
- DGS-1210-24
- 24 ports Number of SFP ports
- DGS-1210-24
- 4 ports Performance Switch Capacity
- DGS-1210-24
- 56 Gbps 64-Byte Packet Forwarding Rate
- DGS-1210-24
- 41.7 Mpps MAC Address Table Size
- 16K Packet Buffer
- 6 MB per device Jumbo Frame
- Up to 13, 000 Bytes Diagnostic LED Indicators DGS-1210-16, DGS-1210-24, DGS-1210-48 Power (per device) Link/ Activity/ Speed (per 10/100/1000 Mbps port) Link/ Activity/ Speed (per SFP port) Physical & Environmental Power Consumption (Standby/ Maximum)
- DGS-1210-24
- 3.6W / 17.6W Power Input
- 10 to 240 VAC, 50/60HZ internal universal power supply

Dimensions (W x D x H)
- DGS-1210-24
- 441 x 209.9 x 44 m Size 19-inch standard rack-mounting width or with rack-mountable brackets 1U Height Ventilation
- DGS-1210-24
- fanless Heat Dissipation
- DGS-1210-24
- 60 BTU per hour Temperature Operating: -5° to 50°C (23° to 112°F) Storage: -20° to 70°C (-4° to 158°F ) Humidity Operating: 0% ~ 95% non-condensing Storage: 0% ~ 95% non-condensing Certification
- CE Class A Safety
- c UL, LVD

























...

The DGS-1210 series provides 48 10/100/1000 Mbps ports plus 4 SFP ports. D-Link Green technology to reduce energy consumption on DGS-1210 series such as shutting down a port, or turning off some LED indicators, or adjusting the power usage according to the Ethernet cable connected to it. The switch supports 802.1Q VLAN standard tagging to enhance network security & performance. The switch also supports 802.1p priority queues, enabling users to run bandwidth-sensitive applications such as streaming multimedia by prioritizing that traffic in network. These functions allow switch to work seamlessly with VLAN & 802.1p traffic in the network. Auto surveillance VLAN will automatically place the video traffic from pre-defined IP surveillance devices to an assigned VLAN with higher priority, so it can be separated from normal data traffic. Asymmetric VLAN is implemented in the switch for a more efficient use of shared resources, such as server or gateway devices ...

Power & value The D-Link DGS-1250 Series Smart Managed Switches deliver real value as an Enterprise Access & Small-to-Medium ...