APC Metered by Outlet Rack Power Distribution Units (PDUs) provide individual outlet power metering to enable energy optimization & circuit protection. Current metering provides real-time remote monitoring of connected loads. Metered by Outlet Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing & right sizing IT environments to lower total cost of ownership. Metered by Outlet Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, & ultra low profile circuit breakers. Users can access & configure Metered by Outlet Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using Infra Struxure Central, Operations, Capacity, & Energy Efficiency. ...

APC Metered Rack Power Distribution Units (PDUs) provide power distribution as well as equip on-site installers with the ability to monitor the aggregate current draw as equipment is connected to the unit. These Metered Rack PDUs also have alarm thresholds that, when exceeded, alert users to potential problems. These features help eliminate the possibility of an overloaded circuit. ...

APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local & remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provide power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access & configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces. ...

APC Metered Rack Power Distribution Units (PDUs) provide advanced warning to protect against unplanned power overloads. User-defined alarm thresholds mitigate risk with real-time local & remote alerts of potential unexpected circuit overloads to your mission critical equipment. Metered rack PDUs provide power utilization trends allowing Data Center Managers to make informed decisions on right sizing IT environments to lower total cost of ownership. Users can access & configure Metered rack PDUs through secure Web, SNMP, or Telnet Interfaces. ...

APC AP8853 Rack PDU 2G, Metered, Zero U, 32A, 230V, (36) C13 & (6) C19 Key Features Nominal Output Voltage
- 230V Maximum
...

Rack PDU 2G, Switched, Zero U, 16A, 230V, (21) C13 & (3) C19, IEC309 Cord APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control & active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment & restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, & low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces & is complimented by APC Centralized Management platforms using Infra Struxure Central, Capacity Manager & Change Manager. Availability Network Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment). Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability) Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Power Delays Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits & dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Load indicator LED Indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Flash Upgradeable Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Integrates with Struxure Ware Data Center Expert An IT-ready, scalable access monitoring system that collects, organizes, & distributes critical alerts, surveillance video & key information, providing a unified view of complex physical infrastructure environments from anywhere on the network Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip.
Includes:: All required connectors, Battery recycling guide, Installation guide, Reusable packaging





...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

Switched Rack PDUs provide load metering combined with controlled on/off switching by individual outlets for remote power recycling, delayed power sequencing of equipment & outlet use management.APC Switched Rack Power Distribution Units (PDUs) place rack equipment power control in the hands of the IT Manager. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control Switched rack PDUs through secure Web, SNMP, or Telnet interfaces. ...

APC offers a wide variety of basic rack-mount power distribution units (PDUs) that allow users to distribute power throughout a rack or enclosure. Whether the rack or enclosure is located in a large datacenter or in a small branch office, power must be distributed to equipment. APC's PDUs offer both vertically & horizontally mounted power strips, as well as a range of amperage & voltage options. ...