More From Contributor

Phobya Pin Mainboard extension internal individually sleeved 30cm
- black Extension cable for connection of a 4-Pin 12V PSU connector
...

Available

Phobya Y-adaptor 4 Pin Molex to 4x 3 Pin (12V) 30cm
- black An extension for a PWM connector (4 Pin). As fan control via the Mainboard
...

Available

Phobya Y-cable 6 Pin socket to 2x 6 Pin plug
- black A Y-cable for distribution of the VGA power connector on the PSU to multiple
...

Available

Phobya Y-cable 8 Pin socket to 2x 8 Pin plug
- black A Y-cable for distribution of the VGA or Maonboard power connector on the
...

Available

Phobya DC12-220 12 Volt Pump The new pumps by phobya stir up the watercooling market! Very quiet, extremely powerful, compact & with a long lifespan: This is the first pump generation by Phobya. Especially when considering the price this pump is truly a great option for your watercooling system! The continuously growing portfolio of accessories in addition increases the possibilities of use & mounting varieties! Technical specifications: Nominal voltage: DC 12V +/-10% Starting voltage: 8V & above Power consumption: 6.5W +/- 10% Current draw: 0.62A +/-10% Max. flow: 400 l/h +/-10% Pressure head: 2.2m +/-10% Dimensions: 52 x 45 x 50mm Lifespan: 50.000 hrs at 25°C Noise emissions: 17.2 d B ...

Available

Phobya DC12-400 12 Volt Pump The new Phobya pumps: A revolution begins! After the first products the manufacturer consortium Phobya now introduces a pump series which rattles the cages in the performance-pump sector. This product perfectly combines all the requirements from different watercooling users: Quiet: At less than 25d B even most fans in the system emit more noise. For decoupling & therefore further noise reduction two kits are included with the pump: The first a map for quick & easy mounting on the case floor. The mat is self-adhesive on both sides & therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case. A ceramic-based centrifugal bearing promises quiet operation & a long lifespan. Compact: With the small outer

Dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact

Dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied. Powerful: Such a small & quiet pump so far always required compromises regarding the power. Not anymore! 4m of pressure head & 800l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks. G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector & you are set to go! 12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete & that internal operation is made safe & easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements & capabilities of the sockets to which you connect the pump). This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting & operation of the pump which makes it in addition quiet & smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller. Technical specifications:
Colour: Black Casing

Material: Plastic Outer dimensions: (L x W x H): 75 x 66 x 54mm Connection thread

Size: G1/4" Power connector: 3-Pin Nominal operating voltage: DC 12V Starting voltage: DC 8V Power consumption: 18W Current draw: 1.8A Max. pressure head: 4m Flow rate: 800 l/h Lifespan: 50.000hrs Noise emission: below 25 db

...

Available

Phobya's handy filling accessory! Made from black plastic this funnel can be used in many places to help with filling of a water cooling system. Of course the main application is use on the reservoir or the Fillport. This funnel makes filling much easier than having to pour through a small 1/4" opening. Another possibility to use this funnel is integrating it into the cooling loop with a T-piece. The advantages over a common funnel are simple but very important: The funnel cannot slip & the short bottom part makes it easy to handle even in small spaces. This funnel should be part of any good water cooling user's tool box! Technical specifications:

Material: Nickel plated brass, rubber

Colour: Black

Dimensions (Hx D): 53x 60mm Thread

Size: 1/4" Thread length: 4mm

...

Available

Phobya High Density 120cm blue (144x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Technical specifications: Length: 120cm

Colour: Blue

Width: 10mm (strip only) Number of LEDs: 144 Voltage: 12VDC to 14VDC Connector: 4-Pin Molex

...

Available

Phobya High Density 120cm green (144x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Technical specifications: Length: 120cm

Colour: Green

Width: 10mm (strip only) Number of LEDs: 144 Voltage: 12VDC to 14VDC Connector: 4-Pin Molex

...

Available

Phobya High Density 120cm red (144x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Technical specifications: Length: 120cm

Colour: Red

Width: 10mm (strip only) Number of LEDs: 144 Voltage: 12VDC to 14VDC Connector: 4-Pin Molex

...

Available

Phobya DC12-260 12Volt Pump

Phobya DC12-260 12Volt Pump The new Phobya pumps: A revolution begins! After the first products the manufacturer consortium Phobya now introduces a pump series which rattles the cages in the performance-pump sector. This product perfectly combines all the requirements from different watercooling users: Quiet: At less than 22dB even most fans in the system emit more noise. For decoupling and therefore further noise reduction two kits are included with the pump: The first a map for quick and easy mounting on the case floor. The mat is self-adhesive on both sides and therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case. A ceramic-based centrifugal bearing promises quiet operation and a long lifespan.
Compact: With the small outer dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied. Powerful: Such a small and quiet pump so far always required compromises regarding the power. Not anymore! 2, 6m of pressure head and 600l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks. G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector and you are set to go! 12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete and that
internal operation is made safe and easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements and capabilities of the sockets to which you connect the pump). This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting and operation of the pump which makes it additionally quiet and smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller. Technical specifications: Color: Black Casing material: Plastic Outer dimensions: (L x W x H): 61, 7 x 59, 7 x 46, 7mm Connection thread size: G1/4" Power
connector: 3-Pin Nominal operating voltage: DC 12V Starting voltage: DC 8V Power consumption: 8W Current draw: 1A Max. pressure head: 2, 6m Flow rate: 600 l/h Lifespan: 50.000hrs Noise emission: below 22 db

External links may include paid for promotion

Availability: In Stock
Supplier: Ebuyer
SKU: 667856

Description Reviews / Comments Add New

Product Description

Phobya DC12-260 12 Volt Pump The new Phobya pumps: A revolution begins! After the first products the manufacturer consortium Phobya now introduces a pump series which rattles the cages in the performance-pump sector. This product perfectly combines all the requirements from different watercooling users: Quiet: At less than 22d B even most fans in the system emit more noise. For decoupling & therefore further noise reduction two kits are included with the pump: The first a map for quick & easy mounting on the case floor. The mat is self-adhesive on both sides & therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case. A ceramic-based centrifugal bearing promises quiet operation & a long lifespan. Compact: With the small outer

Dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact

Dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied. Powerful: Such a small & quiet pump so far always required compromises regarding the power. Not anymore! 2, 6m of pressure head & 600l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks. G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector & you are set to go! 12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete & that internal operation is made safe & easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements & capabilities of the sockets to which you connect the pump). This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting & operation of the pump which makes it in addition quiet & smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller. Technical specifications:
Colour: Black Casing

Material: Plastic Outer dimensions: (L x W x H): 61, 7 x 59, 7 x 46, 7mm Connection thread

Size: G1/4" Power connector: 3-Pin Nominal operating voltage: DC 12V Starting voltage: DC 8V Power consumption: 8W Current draw: 1A Max. pressure head: 2, 6m Flow rate: 600 l/h Lifespan: 50.000hrs Noise emission: below 22 db

Reviews/Comments

Add New

Intelligent Comparison

Available

Phobya DC12-220 12Volt WaterCooling Pump Ebuyer

£25.98

Available

Phobya DC12-400 12Volt WaterCooling Pump Ebuyer

£33.59

Jargon Buster

DC - Direct Current

Black - A colour which does not emit any colour of the spectrum. Black absorbs all frequencies of the spectrum.

Plastic - A generic term for a synthetic product used in the manufacture of products

Ceramic - A hard material with excellent heat resistance made by heating a crystaline substance such as clay

compact - Carefuly designed to ensure an item has a minimal physical size

Cable - A series of wires bonded to form a single thread

RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.

MIDI - Musical Instrument Digital Interface - an industry standard to allow devices and musical instrument to interact.

speed - A measurement of how fast an object travels between two points

Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.

Size - is the measurement of how big an object is in space.

Quick - Something that is fast

Small - something that takes up less space than normal.

Compact - something that has a lot combined within a small space.

Voltage - A measurement of volts.

Dimensions - The shapes and angles of something or a situation.

technical - Something that relates to a good level of skill and methods.

Feature - An attribute that makes something stand out.

Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,

Head - The upper part of a body typically separated by the neck.

Supplier Information

Ebuyer

Ebuyer.com is an uber cool website for those looking for latest electronic gadgets. With host of freebies and discounted prices across a range of electronic devices right from computers to household appliances, Ebuyer has the distinction of being one of the prominent online electronic gadget retailers in UK. The site showcases over 19,000 quality products from reputed brands such as Apple, Sony, HP and Acer. Computing devices on offer include desktops, tablets, laptops and smart phones, hard drives, flash memory, memory, processors, graphics cards from AMD and NVIDIA, motherboards and other computer components, peripherals, software, audio visual and gaming devices. This site also has a comprehensive collection of household appliances for the homemakers.

More From Contributor

Phobya DC12-260 12Volt Pump

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account