The Enthoo Evolv Shift Air combines the striking design of the Evolv series with new, innovative features such as optimised airflow in an attractive Mini-ITX form factor case. The Evolv Shift Air keeps a remarkably small footprint, yet thanks to its clever layout, remains more than capable of supporting high-end gaming hardware. The Shift Air can also be set in a different orientation, & this is then combined with the attractive use of aluminium & fine mesh surfaces to make it an attractive feature of any living room or home cinema setup. Specially developed by PHANTEKS, the mesh fabric covers extend across much of this stylish case, meaning that all your gaming hardware is kept supplied with cool, fresh air. The mesh surfaces also double up as dust filters. Features Striking design with aluminium & fine mesh fabric Perfect case for stylish living room PCs Graphics cards up to 35 cm long GPU bracket can be rotated Supports various RGB-LED controllers Can be set vertically or horizontally Premium PC Case for the Living Room The Enthoo Evolv Shift Air offers space for gaming graphics cards up to 35cm in length &, according to PHANTEKS, the case has been specially designed with the use of two Ai O water coolers in mind, where the radiators are 120 mm in size. With its aluminium & mesh surfaces, the Mini-ITX case fits seamlessly into any designer living room. Furthermore, it can be set vertically or horizontally
- meaning it can easily pass for a Hi Fi system. Fresh, cool air can be pulled in through the mesh coverings on the case, while the mesh itself is so tightly woven that it also acts as a dust filter. The graphics card is mounted with the assistance of the included PCIe x 16 riser cable, meaning that either the backplate or the GPU cooler can be seen from the outside depending on your preference. The Mini-ITX motherboard is mounted in parallel to the graphics card with the back panel facing upwards. The ports on the I/O panel as well as the graphics card are cleverly concealed beneath a cover, & this has the added benefit of concealing much of the cabling which is then guided through an opening & on into the back of the case. Cooling, Storage & Additional Features A pre-installed 140 mm fan in the Evolv Shift Air pushes warm air from the front & side panels out of the case, while the air inlets in the roof also contribute to the cases overall excellent cooling. A 3, 5"- or 2, 5" SSD can be installed at the back & two further SSDs can be installed in the front with the help of the bundled SSD brackets
- at the expense of the 140 mm fans of course. The rear panel on which the SSD/HDD is mounted can be removed to make hardware installation even easier. The I/O panel of the Mini-ITX case is located to the left side on the back of the case & offers two USB (Universal Serial Bus) 3.0 ports for gaming peripherals or external USB (Universal Serial Bus) hard drives & USB (Universal Serial Bus) sticks. In order to put your hard-earned hardware on show in the best possible light, the case

Includes:: an RGB controller that can be controlled at the touch of a button. As we have come to expect from PHANTEKS, there are multiple points within the case that include velcro loops for cable management as well as rubberised cable pass-throughs. The bottom & top of the case, as well as the air inlets on the aluminium covers to the rear, all include additional dust filters that help keep your system looking & running its best. Technical

Details: Dimensions: 186 x 470 x 274 mm (W x H x D)

Material: Steel, aluminium, mesh fabric

Colour: Black Form factor: Mini-ITX Total possible fans: 2x 140/120 mm (front) 1x 140/120 mm (bottom) Pre-installed: 1x 140 mm (front) Radiator Mountings (partially forfeits HDD- and/or fan slots): 1x max. 120 x 27 mm (front) 1x max. 120x 27 mm (bottom) Filter: Front, rear, bottom (removable) Drive bays: 1x 3, 5" (internal, if no radiator is installed) 3x 2, 5" (internal, 2 SSD brackets included, additional brackets can be purchased separately) PSU: 1x SFX or SFX-L (optional) Expansion slots: 2 I/O Panel: 2x USB (Universal Serial Bus) 3.0 1x RGB switch Max GPU length: 350 mm Max CPU cooler

Height: 82 mm Max PSU length: 145 mm Guarantee: 5 Years











...

The Phanteks Halos Digital RGB fan frames complements & premium system build with ambient illumination. Using high density LEDs that are individually addressable, allows for more patterns and colour modes with smooth transitions. Illuminate your performance fans with the Halos Digital fan frames & bring style to your system without compromising performance. Illuminate any 120/140mm fan The Halos Digital RGB fan frame is developed to illuminate fan blades from different varieties of material/colour with a bright ambient glow. This means even high performance fans made from PBT material, like Phanteks MP & SP fans, can now be illuminate in any colour. With the Halos theres no more compromise on performance when RGB illuminated fans are desired. High Density LED Using 30x LEDs per frame, the Halos Digital RGB fan frame is designed with high density LEDs & a diffuser to spread light brightly & evenly for the best ambient effect on your fan & case interior. RGB Sync + Easy Cable Routing Daisy chain all of Phanteks DRGB products together & sync the DRGB lighting with any DRGB equipment Phanteks case or motherboard. The Halos Digital RGB can be controlled with Phanteks Digital RGB Controller or a compatible motherboard using the Phanteks DRGB Motherboard adapter. Mounting Screws Included The Halos Digital RGB fan frames can be mounted directly to & standard 120/140mm fan with the included fan screws or UNC 6-32 radiator screws. ...

Phanteks stands for innovation, quality & distinctiveness. Phanteks embarked on this mission with their fantastic cases, coolers & fans. The Halos Lux represents Phanteks taking the next step in terms of innovation by offering RGB illuminated frames for upgrading fans. This enables even standard RGB-less fans to look great without compromising on performance. THE PHANTEKS HALOS LUX AT A GLANCE Innovative frame for 140 mm fans Powerful RGB lighting with 21 LED diodes Manufactured from robust, premium aluminium Compatible with Phanteks cases, Mystic Light, Aura Sync & RGB Fusion RETROFITTING IMPRESSIVE RGB LIGHTING The premium Phanteks Halos Lux are fan frames with RGB lighting which can be mounted to standard 140 mm fans. Manufactured in robust, anodised, black aluminium, even without lighting they have an incredible look. With the 21 integrated RGB diodes they allow any gaming PC to be quickly & easily supplemented with an impressive lighting upgrade. The Halos Lux can be controlled through Phanteks integrated RGB controls. The bundled RGB-LED adapter can also be integrated with the motherboard, offering support for MSI Mystic Light, ASUS Aura Sync & Gigabyte RGB Fusion. A diffuser ensures a bright & even distribution of light to allow your case & fans to achieve the best possible lighting. Especially exciting is the possibility to daisy-chain several Phanteks RGB products together. The Halos Lux can also be integrated into such a setup. Technical

Details: Dimensions: 140 x 140 x 6 mm (W x H x D) Weight: 90 g

Material: Anodised aluminium

Colour: Gunmetal Grey LED Lighting: RGB, 21 diodes Guarantee: 2 Years Bundle: Halos Lux 140 mm frame RGB-LED Adapter 4x Fan Screws 4x UNC 6-32 Radiator Screws





...

The high performance Phanteks RGB LED strip features ultra high brightness LEDs & incorporate a number of unique features that ensure long-lasting, bright & even illumination. If you are looking to add to your existing LED strips in your Phanteks case you can purchase the PH-LEDKT_M4, which

Includes:: 1x 400mm magnetic LED strip & 3M adhesive tape. The single 400mm LED strip can also connect directly to your Phanteks case that has the LED connector function (please check Phanteks website for compatible cases). High-Brightness LED Chip
- Our Phanteks RGB LED strips are extremely bright & it is a great addition to any case for interior lighting.
- Magnetic with 3M stickers included: Phanteks RGB LED strips have integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For aluminium chassis, our LED strips include double-side 3M tape.
- Flexible & Better Cable Management: With our 1 orientation connector, the color channels are always in the right position. The RGB LED strip is also chainable & can be expanded by adding more light strips.
- Efficient, Low Profile & Long-lasting: The strip is made from flexible PCB material & comes with a silicone housing which is more durable compared to commonly used Epoxy strips. They will not dry up or crack over time. Long lasting & waterproof..





...

Features Transform your case with Phanteks’ multicolor LED waterproof strips. Double sided 3M tape to keep the LED firm on your chassis & installaiton is easy with the plug & play connector. The LED strip allows the user to control the colors with the LED switch matching the case’s LEDs. Specifications Mounting: Magnets (Double Sided Tape also included) Input: 4 pin female Connector: Output: 4 pin male. M/B Adapter: 4 pin (+12V, G, R, B) Input Voltage: +12V Current: 0.42A / 400mm Wattage: 5.04W / 400mm Compatibility: Phanteks 4 pin connector / M/B 4 pin RGB Header (+12V, G, R, B) LED Spec: 5050 Full Color RGB LED count: 21 LED / 400mm MTBF: 20, 000 hr, 2x 400mm Strip ...

Eclipse P400A The Phanteks Eclipse P400A breathes performance with its full metal mesh front panel. Thanks to engineering improvements we have been able to create an Ultra-Fine Performance Mesh that brings the best possible performance while keeping dust from entering the system. Strength & Performance Full-Metal Mesh Front Panel – The single-piece front panel is made from & Ultra-Fine Steel Mesh. This mesh catches dust, adds structure, strength, & is part of the P400A’s seamless design. enhanced Airflow – The P400A chassis has enhanced airflow to keep your system cool. The optimized High Air-flow Mesh Front Design offers maximum cooling performance Integrated 3-Speed Fan Controller The built-in Fan Controller balances noise & performance with the push of a button. Choose the right speed for you Full, Medium, Low. Cooling Capacity The Eclipse P400A has a range of possible fan & radiator locations up to 360mm for both 120mm & 140mm Fans. Storage Capacity The P400A supports 2x 3.5” HDDs & 2x 2.5” SSDs out of the box with easy to use trays & vibration dampening. There is space for an additional 4x drives with the optional PH-HDDKT_02 Brackets* * Brackets sold Separately ...

Eclipse P400A The Phanteks Eclipse P400A breathes performance with its full metal mesh front panel. Thanks to engineering improvements we have been able to create an Ultra-Fine Performance Mesh that brings the best possible performance while keeping dust from entering the system. Strength & Performance Full-Metal Mesh Front Panel – The single-piece front panel is made from & Ultra-Fine Steel Mesh. This mesh catches dust, adds structure, strength, & is part of the P400A’s seamless design. enhanced Airflow – The P400A chassis has enhanced airflow to keep your system cool. The optimized High Air-flow Mesh Front Design offers maximum cooling performance Intergrated Digital-RGB Lightning & Expansion The Integrated Digital-RGB lighting can be easily controlled with the Mode & Colour buttons. The Digital-RGB Controller can be expanded & synced to a compatible motherboards. Cooling Capacity The Eclipse P400A has a range of possible fan & radiator locations up to 360mm for both 120mm & 140mm Fans. Storage Capacity The P400A supports 2x 3.5” HDDs & 2x 2.5” SSDs out of the box with easy to use trays & vibration dampening. There is space for an additional 4x drives with the optional PH-HDDKT_02 Brackets* * Brackets sold Separately ...

Eclipse P600s The Eclipse P600S is designed to bring you the best of two worlds. A hybrid forged between silent & high-performance chassis. Find the optimal configuration in any situation by switching between quit or performance mode. Designed with effective soundproofing panels & Phanteks’ new high-airflow fabric, the Eclipse P600S offers the full potential of two opposites, minimum noise & maximum airflow. Two Interchangeable Modes Silent mode – Find peace & quiet with the P600S in silent mode. Weight-reinforced acoustic panels reduces all unwanted noise. High-Performance Mode- Instantly switch to high-performance mode by removing the acoustic panels to reveal Phanteks’ High-Airflow Fabric Mesh for maximum case airflow. Silent Mode – Effective Soundproofing The P600S can be set in Silent mode that dampens internal hardware sound considerably while allowing sufficient case airflow, thanks to the effective soundproofing panel design. Multiple layers of sound insulation stops high-frequency soundwaves. The effective soundproofing panel design breaks down internal sound waves in multiple sections before they can exit the case, while allowing sufficient airflow to pass through. High-Airflow Mode – Maximum Cooling Capacity The Eclipse P600S can be easily switched from Silent mode to High-Airflow mode & vice versa. In High-Airflow mode, the case airflow can be maximised when soundproofing panels are removed to reveal Phanteks’ High-Airflow Fabric Mesh. Phanteks’ new High-Airflow Fabric Mesh is made from highly breathable technical textile, that allows even more airflow pass-through than traditional mesh panels. Cooling Capacity The Eclipse P600S utilizes it’s chassis size & form to provide a range of possibilities when it comes to installing radiators & fans. This case supports 120mm & 140mm fans & radiators. Storage Capacity With the capacity to install up to 10x 3.5” hard drives & a more than capable 3x SS drives, you would never run out of space. With all of this flexibility you are free to customize your build even further. ...

Eclipse P600s The Eclipse P600S is designed to bring you the best of two worlds. A hybrid forged between silent & high-performance chassis. Find the optimal configuration in any situation by switching between quit or performance mode. Designed with effective soundproofing panels & Phanteks’ new high-airflow fabric, the Eclipse P600S offers the full potential of two opposites, minimum noise & maximum airflow. Two Interchangeable Modes Silent mode – Find peace & quiet with the P600S in silent mode. Weight-reinforced acoustic panels reduces all unwanted noise. High-Performance Mode- Instantly switch to high-performance mode by removing the acoustic panels to reveal Phanteks’ High-Airflow Fabric Mesh for maximum case airflow. Silent Mode – Effective Soundproofing The P600S can be set in Silent mode that dampens internal hardware sound considerably while allowing sufficient case airflow, thanks to the effective soundproofing panel design. Multiple layers of sound insulation stops high-frequency soundwaves. The effective soundproofing panel design breaks down internal sound waves in multiple sections before they can exit the case, while allowing sufficient airflow to pass through. High-Airflow Mode – Maximum Cooling Capacity The Eclipse P600S can be easily switched from Silent mode to High-Airflow mode & vice versa. In High-Airflow mode, the case airflow can be maximised when soundproofing panels are removed to reveal Phanteks’ High-Airflow Fabric Mesh. Phanteks’ new High-Airflow Fabric Mesh is made from highly breathable technical textile, that allows even more airflow pass-through than traditional mesh panels. Cooling Capacity The Eclipse P600S utilizes it’s chassis size & form to provide a range of possibilities when it comes to installing radiators & fans. This case supports 120mm & 140mm fans & radiators. Storage Capacity With the capacity to install up to 10x 3.5” hard drives & a more than capable 3x SS drives, you would never run out of space. With all of this flexibility you are free to customize your build even further. Included accessories Premium 140mm fan x 3 Universal Fan Hub x 1 3.5” Stackable HDD bracket x 4 2.5” SSD bracket x 3 GPU Anti-Sag bracket x 1 Airflow Cover x 1 Toolbox x 1 ...

Phanteks PH-TC14PE_BL twin tower thermal radiator design uses the latest aerospace technology. By using P.A.T.S to increase cooling performance & C.P.S.C Technology to enhance thermal conductivity, heat will easily dissipate, creating an opportunity for greater overclocking. Combined with Dual Phanteks PH-F140 Premium 140mm Fans, easy-to-install Soli Sku mounting kit & PH-NDC thermal compound, Phanteks PH-TC14 with unique colored is setting the new standard of todays CPU cooling. Brand
- PHANTEKS Model
- PH-TC14PE_BL Type
- Heatsinks & Fans Compatibility
- Intel Socket LGA 1155, 1156, LGA 1366, LGA775 & AMD AM2/2+/AM3 Color
- Blue Material
- Copper (Base & 5 x & Iuml;ˆ8mm Heat-pipes), Nickel Plated, Alum. (cooling Fins / Top Cover) with Patented P.A.T.S (Physical Anti-Oxidant Thermal Shield) to increase cooling performance., Patented C.P.S.C Technology (Cold Plasma Spraying Coating Technology) to enhance thermal conductivity. Fan Model
- PH-F140 Premium Fan Fan Size
- 140x 140x 25, Dual Fans

Includes:: Fan Compatibility
- 140x 140x 25mm x 3 pcs, (120 x 120 x 25mm x 3 pcs). (Third fan clips & accessory included). Bearing Type
- UFB bearing (Updraft Floating Balance bearing) Blade Geometry
- 9 White colored Blades with MVB (Maelstr ¶m Vortex Booster) Design RPM
- 1200 RPM ± 10% RPM with Q.S.A
- 900 RPM ± 10% Max Air Flow
- 78.1 CFM Max Air Flow with QSA
- 60.1 CFM Max Air Pressure
- 1.21 Max Air Pressure with QSA
- 0.69 mm H2O Acoustical Noise
- 19 d BA Acoustical Noise with Q.S.A
- 15.2 d BA Input Power
- 1.8W Current (Ampere)
- 0.15A Rate Voltage
- 12V MTBF
- MTBF > 150, 000 hr. Heatsink Dimension (Lx Wx H) without fan
- 134*140*160mm Heatsink Dimension (Lx Wx H) with Dual Fans
- 159*140*171mm Heatsink Weight without fan
- 970g Heatsink Weight with fan
- 1100/1250g (single/ Dual) Fan Package Dimension
- 167x 214x 190mm (Lx Wx H) 1x PH-NDC Thermal Compound





























...