Nissin Di622 MkII Speedlite Flashgun Nikon NFG007N (622624).

Product Description

The Nissin Di 622 MK2 Speedlite Flashgun has been developed from the very successful & widely acclaimed original Nissin Di 622. The Mk 2 incorporates the 622 original features together with Nissin ¯34;&8217;s latest technology advances.

Features:. Guide No.62 (metres) at ISO200 with the reflector at 105 degrees. 6 level manual power control. The flash beam covers the frame from 14mm (with a wide angle diffuser built-in) to 70mm of a digital lens (24-1905 full frame equivalent). Built in reflection panel for fill-in shots. Power source 4 x AA batteries or equivalent. Recycle time ¯34;&8211; 5 seconds to full power with fresh batteries. Flash exposure control E-TTL & ETTL for Canon Cameras. I-TTL for Nikon. Bounce Flash. Bounce light. The Nissin Swivel head moves 90 degrees upward & 270 degrees horizontally for bounce lighting. Wireless Remote Flash. With the Di 622 Mark 2 you can enjoy creative flash photography with multiple lighting situations from various directions. There are 3 slave modes provided, SD, SF & Wireless TTL. Slave Digital (SD): Di 622 Mark 2 synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon & i-TTL for Nikon) mode. Slave Film (SF): Di 622 Mark 2 synchronizes to the traditional single flash system. The master flash is to be set at manual mode. Studio lighting systems synchronize to this mode. Wireless TTL: Di 622 Mark 2 synchronizes to the wireless remote flash system. The master flash is to be set at Channel 1 group A in wireless remote mode. TTL Flash Level Compensation. The power level can be adjusted from -1.5EV through to +1.5EV by.05EV steps. Nissin Original ¯34;´ My TTL ¯34;&8217; SETTING. The TTL flash power level is pre-set for exposure at factory. You can, however, user reset the desired exposure level, in +/-0.75 Ev. By 0.25 Ev increments. The pre-set value is memorised as your personal setting after switching the unit off/on. Energy Saving System. The Di 622 Mark 2 has a dual energy saving system. It automatically enters sleep mode when it ¯34;&8217;s not in use for 5 min, & is reset with a touch of the shutter button or any button of the flash. If the unit is not in use for 30 mins, it will automatically power off. With the flash unit set for slave mode, sleep mode is cancelled & the unit will not automatically turn off until 60 mins have elapsed. AF Assist Beam. In darkness or dim light conditions, the Di 622 Mark 2 beams a red light to create a sharp contrast to enable the camera ¯34;&8217;s focus sensor to focus easily on the subject. Flash Power Lock System. The Di 622 Mark 2 is compatible with either the FE lock (Canon) or FV lock (Nikon) system. Refer to the camera owner ¯34;&8217;s manual for details. X-Contact & External Synchro Contact. Di 622 Mark 2 can be used without hotshoe cameras by using the synchronization X-terminal or 3.5mm sockets instead. Firmware Updates. A firmware upgrade system is available for the Di 622, which provides a service to upload the latest software. Accessories Included: Show st&, pouch. Dimensions: 130x 77x 103mm / 5.1x 3x 4.1 inches. Weight: 315g (without battery)