- Product Description: NETGEAR Pro SAFE S3300-52X-Po E+
- switch
- 52 ports
- smart
- rack-mountable
- Device Type:




...

Direct Attach SFP+ copper cable SFP+ connector on both sides Fits into any 10 GE SFP+ interface (front) Drives 10 Gigabit Ethernet ...

NETGEAR WAG102 Pro Safe Dual Band A/B/G Wireless Access Point Wireless Networking is Secure The Netgear WAG102 Dual Band Wireless Access Point comes with the latest security proto-cols, including the highest available wireless security standard, WPA2 Enterprise. 128/152-bit WEP encryption & advanced AES 256-bit encryption ensures the privacy of all wireless communication. 802.1x RADIUS server authentication controls wireless network access & centralises user authorisation across the wireless LAN. The Netgear WAG102 also supports MAC authentication with a 256-user Access Control List (ACL) to limit network access to specified users & VPN pass-through for private communi-cations between head office & branches or remote home workers. This names just a few wireless security features available with the Netgear WAG102 Dual Band Access Point. Management & Power over Ethernet (Po E) Integrated 802.3af-based Power over Ethernet support means that there is no need to locate the Netgear WAG102 close to an electrical power output or trail cables across the floor: Power can be transmitted over the Ethernet network instead. The Netgear WAG102 also supports SNMP (Simple Network Management Protocol) & associated network man-agement software (including NETGEAR Pro Safe™ NMS100) to integrate your office wireless LAN with your wired infrastructure. Easy to Set-up & Use The Netgear WAG102 Dual Band Wireless Access Point is simple to set-up & use. It is ple-num rated, appropriate for placement above drop-down ceilings & under raised floors. This access point is also equipped with the convenient Smart Wizard™ browser-based interface for quick installation. Physical Specifications

Dimensions (H x W x D): 32 x 190.5 x 122 mm (1.25 x 7.5 x 4.8 in.) Weight. 62kg (1.3 lb) Wireless Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to 108 Mbps Wireless Access Point Antennas: Two (2) detachable antennas: (1) 5 d Bi, 2.4 GHz & (1) 5 d Bi 5 GHz Physical Interfaces LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (Po E) support Power adapter: 12 VDC, 1.0A power supply; plug is localized to country of sale. Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, & WLAN 802.11g Antenna Connector: Two (2) reverse SMA antenna connectors Network Management Remote configuration & management through Web browser, SNMP SNMP management supports SNMP MIB I, MIB II, & 802.11 MIB Advanced Wireless Features Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Adjustable Transmit Power Control (TPC) from 100 m W down to 0 m W Typical Maximum Power Output 802.11b mode, 1 to 11 Mbps + 19 d Bm 802.11g mode, 6 to 24 Mbps + 18 d Bm 802.11g mode, 36, 48 & 54 Mbps + 17/16/16 d Bm Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance. Receive Sensitivity 802.11b 2 Mbps -94 d Bm 5.5 Mbps -92 d Bm 11 Mbps -90 d Bm 802.11g 6 Mbps -91 d Bm 9 Mbps -91 d Bm 12 Mbps -90 d Bm 18 Mbps -87 d Bm 24 Mbps -85 d Bm 36 Mbps -80 d Bm 48 Mbps -75 d Bm 54 Mbps -70 d Bm 802.11a 6 Mbps -92 d Bm 9 Mbps -91 d Bm 12 Mbps -90 d Bm 18 Mbps -86 d Bm 24 Mbps -84 d Bm 36 Mbps -79 d Bm 48 Mbps -72 d Bm 54 Mbps -70 d Bm Power Over Ethernet Required 4.3 W Security 40/64-, 128-, & 152-bit WEP encryption Block SSID Broadcast VPN pass-through support MAC address filtering with access control lists – up to 256 users 802.1x RADIUS support with EAP TLS, TTLS, PEAP Wi-Fi Protected Access (WPA2) Secure Socket Layer (SSL) remote management login Standards, Safety & Electromagnetic Conformance IEEE 802.11g (2.4 GHz Frequency B&, DSSS Modulation Type) IEEE 802.3af Power over Ethernet (Po E) FCC Part 15 Subpart B & Subpart C CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive 99/5/EC, CSIPR22 (B), AS/NZS 3548 (B) Plenum Rated IEEE 802.11g (2.4 GHz Frequency B&, DSSS Modulation Type) IEEE 802.11a IEEE 802.3af Power over Ethernet (Po E) FCC Part 15 Subpart B, Subpart C & E C-Tick: AS/NZ 3548 Class B CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002-08), EN 301 489-1 V1.4.1 (2002-08), EN 300 328-1 (2001-12), EN 300 328-2 (2003--4), EN301893 (5 G Hz), EN60601, R&TTE Directive 99/5/EC Environmental Specifications Operating temperature: 0 to 40° C (32 to 104° F) Operating humidity: 90% maximum relative humidity, noncondensing Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

NETGEARs Pro Safe Dual Band Wireless Access Point WAGL102 delivers the secure, reliable, high performance wireless local area networks (WLANs) todays mobile workforce demands. The WAGL102 Access Point supports both 5 GHz & 2.4 GHz 54 Mbps radio transmission in both 802.11g & 802.11a in turbo mode. It supports up to 128 simultaneous wireless clients & client types within the same coverage area. Managed & configured by the NETGEAR Prosafe Smart Wireless Switch, the WAGL102 is a "light" wireless access point, which is part of the overall NETGEAR Pro Safe Smart Wireless Solution. The WAGL102 supports integrated IEEE 802.3af Power over Ethernet (Po E) & Wi-Fi certification. Managed & configured by the NETGEAR Pro Safe Smart Wireless Switch (WFS709TP), the WAGL102 is a "light" wireless access point that implements the 802.11 standard. As part of the centralized architecture, much of the security configuration such as WPA2-Enterprise (802.11i), WPA2 & 802.1x support happens at the NETGEAR Pro Safe WFS709TP. The NETGEAR Pro Safe Smart Wireless Switch also supports MAC address authentication, support for multiple BSSID/ VLANs & guest/contractor access. As part of the NETGEAR Pro Safe Smart Wireless Solution, the WAGL02 is cost-effective & simple to install & use. In addition, its Wi-Fi certified & plenum rated
- appropriate for placement above drop-down ceilings & under raised floors. Fitted with two powerful detachable 5 d Bi antennas & compatible with NETGEARs Pro Safe 2.4 GHz antennas for expanded wireless capacity & range. The WAGL102

Includes:: the embedded IEEE 802.3af Power over Ethernet (Po E) port which expands installation options by eliminating the need to locate the Light Wireless Access Point near a power outlet. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

Small form factor access point for in-room wired & wireless access The WN370 Wall Mount Access Point is designed specifically for in-room coverage for wired & wireless access for small & medium hotels & education dormitories. The WN370 has a sleek, elegant, & compact design that allows the AP to be deployed in an inconspicuous manner & can be installed quickly by non-technical personnel. The WN370 is powered with Po E with 1 Gbps uplink & 4 (100 Mbps) Ethernet data ports, plus additional voice port for connectivity to digital phones. The WN370 is centrally managed by an enterprise class wireless controller with automatic RF & power tuning with guest captive portal & comprehensive wireless security. Small form factor & inconspicuous appearance The aesthetically pleasing design of the WN370 allows the access point to blend nicely in the hotel room & school dormitories. WN370 provides wired access directly to the users, where the traditional form factor Access Points are normally installed on the ceiling, away from the access of the users that need wired connectivity. The WN370 is installed with easy attachment to the junction box & appears with a nice decorative appearance. Fast installation & Po E powered The WN370 can be installed easily & less than 5 minutes. The WN370 ships with mounting brackets & fits into both US & EU standard electric junction boxes. Only 4 screws are needed to reliably install the WN370 to the wall with low protrusion. The WN370 is powered via Power over Ethernet on the 1 Gbps uplink. Simply connect a Ethernet cable between the WN370 & a Po E enabled switch & the WN370 is up & running. There is no separate power cord needed. Flexible & easy deployment WN370 can be installed easily & does not need sophisticated skills of engineers. WN370s are generally deployed in room, especially effective in areas where deploying the access points in traditional locations (such as ceiling mounted or hallways of dormitories & hotels) are not feasible. Because the WN370 is designed to provide coverage in a specific room, where the RF containment is more well defined, no extensive site survey is required. Finally, because the WN370 comes with four Ethernet ports, users can plug in multiple wired devices without the requirement to pull additional cables from the access point to the wiring closet, thereby saving both time & money to meet the requirements of multiple Ethernet ports per room Centrally managed with complete enterprise features The WN370 is centrally managed by the WC7600 Wireless Controller. All of the configurations can be centrally configured & stored at the WC7600. Once the WN370 is discovered by the WC7600, it will receive the latest firmware & the updated configuration provided by the WC7600. The WC7600 will automatically & dynamically adjust the RF frequency & the output power of the WN370 to ensure optimal frequency reuse & the best power setting to provide ubiquitous coverage of the intended location. Comprehensive site survey is generally not needed, thereby making the installation & wireless design of WN370 as simple as it gets. ...

NETGEARs Pro Safe 802.11g Wireless Access Point WG102 delivers the secure, reliable, high performance wireless local area networks (WLANs) todays mobile workforce demands. This powerful device provides the industry standard access to corporate network resources, email & the Internet. Fully compatible with IEEE 802.11g, (2.4 GHz), it can also be set for dynamic 108 Mbps 802.11g. With its robust security measures, simplified management & configuration, SNMP support, integrated IEEE 802.3af power over Ethernet (Po E), & Wi-Fi certification, the WG102 brings standards-based enterprise-level functionality at a mid-market price. Complies with industry security standards for wireless data encryption, & user authorization. 802.11i ready, WPA provides enhanced, interoperable wireless networking security. WPA & 802.1x support enables strong mutual authentication to ensure that only legitimate clients associate with corporate RADIUS servers. Supports MAC address authentication with 256-user Access Control List (ACL) & VPN pass-through. Integrated IEEE 802.3af-based Power over Ethernet (Po E) support eliminates extra cables & the need to locate near a power outlet, as the access point is powered over the Ethernet cable. Supports Simple Network Management Protocol (SNMP) MIB I, MIB II, & 802.11 MIB using SNMP-based network management software, such as NETGEAR Pro Safe Network Management System NMS100. Supports all popular 802.1x port-based authentication protocols, including Extensible Authentication Protocol (EAP) Transport Layer Security (TLS), Protected EAP (PEAP), & Tunneled TLS (TTLS). IEEE 802.11g wireless standard
- with optional speeds up to 108 Mbps
- takes care of business communications with great dispatch & skill. Delivers functionality for point-to-point & point-to-multi-point bridging & repeater modes. High performance wireless features combine with a typical -75 d Bm receive sensitivity (Rx) at 54 Mbps, 19 d Bm transmit power (Tx) & a high gain 5 d Bi omni-directional antenna for optimal range & throughput. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

NETGEARs Wireless Access Point Pro Safe WG103 is ideal for extending an existing Ethernet network to areas that cabling cannot reach, or to provide easier connectivity for visitors, a mobile workforce or hot desking staff. Features High-speed IEEE 802.11g, up to 108 Mbps in turbo mode Extensive Security features include: Wi Fi Protected Access™ (WPA/WPA2), 802.11i Multiple BSSID Rogue AP detection MAC address filtering 802.1x with RADIUS support WPA2 data encryption when using WDS bridging Disable/enable SSID broadcast Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Exceptional ease-of-use. Best-in-class performance. A full-featured, reliable Wireless LAN architecture. In short, the WC7520 is the smart, easy choice to meet the demands of mid-size organizations with thousands of users. Reliable, Secure & Scalable Wireless Controller for Mid-sized Businesses, Schools & Hospitals The NETGEAR Pro SAFE Wireless Controller WC7520 offers a high-performance, fully-featured, yet extremely affordable, Wireless LAN architecture to meet the demands of medium-sized businesses, schools, & hospitals with thousands of users. Performance Seamless L2 & L3 fast roaming provide support for latency-sensitive applications such as video, audio & voice over wireless Dynamic RF Management: Automatic controls of AP transmit power & channel allocations ensure coverage by minimizing interferences Self-healing Wireless: Automatic WLAN healing after loss of AP or due to RF interferences adapts the power & channel of the other APs around the area Load balancing & rate limiting ensure fair bandwidth allocation among all clients for robust wireless connectivity Dynamic load balancing of clients across APs is provided based on number of clients per AP, or based on signal strength threshold/data rate threshold of clients per AP Business value Customer floor maps: Heat maps by wireless b&, wireless channel & signal strength allow real-time reporting of the wireless network status Redundancy for always-on reliability & peace of mind: N+1 redundancy with failover (one cold redundant Controller for 1, 2 or 3 production Controllers) Built to last, the WC7520 Controller is backed by a Lifetime Warranty Scalability The scalable WC7520 Controller enables businesses to grow their wireless network as needed with a dramatic return on investment: WC7520 scales up to 50 access points (AP)
- & up to 150 access points (AP) with stacking Support of controller redundancy to maximize reliability Ease of Use Con&64257;gure the MAC address &64257;lters, make SSID changes, & change the password for all access points—all from the single WC7520 interface Triangulation: Administrators can easily locate known APs, rogue APs, & associated clients on the heat map Wireless bundles (for single & dual band APs) for ease of ordering
...

The NETGEAR Pro Safe line of business networking products offers a wide array of easy-to-use, professional-grade switching, wireless, software & security solutions. Pro Safe products provide an abundance of intelligent, innovative & practical features, addressing the unique requirements of business networks. Securely connects up to 5 remote office or traveling users to your office network via VPN Stateful packet inspection firewall for robust business security IPsec VPNs connect remote users as well as remote sites, with optional software Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Improved coverage & 10x greater speed than Wireless-G Simultaneous 802.11n support while backward compatible with 802.11g devices Enterprise security features include WPA2, WPA, rogue AP detection & 802.1x with RADIUS support Supports IEEE 802.3af Po E for easy placement in optimal locations
- desktop, wall-mount or ceiling. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...