- Device Type: Switch
- 28 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable
- 1U
- Subtype:10






...

- Device Type: Switch
- 28 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable
- 1U
- Subtype:






...

- Device Type: Switch
- 52 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable
- 1U
- Subtype:






...

- Device Type: Switch
- 52 ports
- L3
- Managed
- stackable
- Enclosure Type: Rack-mountable
- 1U
- Subtype:10






...

3 x 3 multiple-input, multiple-output (MIMO) with three spatial streams Dual band concurrent in 2.4 & 5 GHz radio band for maximum wireless throughput Stylish & elegant design with easy mounting options (e.g., ceiling, wall & desktop) Backward compatibility with 802.11a, 802.11g & 802.11b network devices Integrated Power over Ethernet (IEEE 802.3af & 802.3at Po E) lowers deployment costs Deploy wireless coverage over large areas with point-to-point & point-to-multipoint bridging via Wireless Distribution System (WDS) Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Internal antennas factory-optimized for maximum RF performance Advanced Security with Wireless Intrusion Detection (WIDS) & Wireless Intrusion Prevention (WIPS) support 802.11n Beamforming to improve range & maximizes data rates Device-based Qo S to provide differentiated service level agreement to each user & device type Bandsteering to load balance clients between 2.4 & 5 GHz Redundant dual Ethernet ports to ensure maximum reliability ...

- Product Description: NETGEAR Pro SAFE S3300-52X
- switch
- 52 ports
- smart
- rack-mountable
- Device Type: Switch
-





...

- Product Description: NETGEAR Pro SAFE S3300-52X-Po E+
- switch
- 52 ports
- smart
- rack-mountable
- Device Type:




...

Direct Attach SFP+ copper cable SFP+ connector on both sides Fits into any 10 GE SFP+ interface (front) Drives 10 Gigabit Ethernet ...

NETGEAR WAG102 Pro Safe Dual Band A/B/G Wireless Access Point Wireless Networking is Secure The Netgear WAG102 Dual Band Wireless Access Point comes with the latest security proto-cols, including the highest available wireless security standard, WPA2 Enterprise. 128/152-bit WEP encryption & advanced AES 256-bit encryption ensures the privacy of all wireless communication. 802.1x RADIUS server authentication controls wireless network access & centralises user authorisation across the wireless LAN. The Netgear WAG102 also supports MAC authentication with a 256-user Access Control List (ACL) to limit network access to specified users & VPN pass-through for private communi-cations between head office & branches or remote home workers. This names just a few wireless security features available with the Netgear WAG102 Dual Band Access Point. Management & Power over Ethernet (Po E) Integrated 802.3af-based Power over Ethernet support means that there is no need to locate the Netgear WAG102 close to an electrical power output or trail cables across the floor: Power can be transmitted over the Ethernet network instead. The Netgear WAG102 also supports SNMP (Simple Network Management Protocol) & associated network man-agement software (including NETGEAR Pro Safe™ NMS100) to integrate your office wireless LAN with your wired infrastructure. Easy to Set-up & Use The Netgear WAG102 Dual Band Wireless Access Point is simple to set-up & use. It is ple-num rated, appropriate for placement above drop-down ceilings & under raised floors. This access point is also equipped with the convenient Smart Wizard™ browser-based interface for quick installation. Physical Specifications

Dimensions (H x W x D): 32 x 190.5 x 122 mm (1.25 x 7.5 x 4.8 in.) Weight. 62kg (1.3 lb) Wireless Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to 108 Mbps Wireless Access Point Antennas: Two (2) detachable antennas: (1) 5 d Bi, 2.4 GHz & (1) 5 d Bi 5 GHz Physical Interfaces LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (Po E) support Power adapter: 12 VDC, 1.0A power supply; plug is localized to country of sale. Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, & WLAN 802.11g Antenna Connector: Two (2) reverse SMA antenna connectors Network Management Remote configuration & management through Web browser, SNMP SNMP management supports SNMP MIB I, MIB II, & 802.11 MIB Advanced Wireless Features Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Adjustable Transmit Power Control (TPC) from 100 m W down to 0 m W Typical Maximum Power Output 802.11b mode, 1 to 11 Mbps + 19 d Bm 802.11g mode, 6 to 24 Mbps + 18 d Bm 802.11g mode, 36, 48 & 54 Mbps + 17/16/16 d Bm Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance. Receive Sensitivity 802.11b 2 Mbps -94 d Bm 5.5 Mbps -92 d Bm 11 Mbps -90 d Bm 802.11g 6 Mbps -91 d Bm 9 Mbps -91 d Bm 12 Mbps -90 d Bm 18 Mbps -87 d Bm 24 Mbps -85 d Bm 36 Mbps -80 d Bm 48 Mbps -75 d Bm 54 Mbps -70 d Bm 802.11a 6 Mbps -92 d Bm 9 Mbps -91 d Bm 12 Mbps -90 d Bm 18 Mbps -86 d Bm 24 Mbps -84 d Bm 36 Mbps -79 d Bm 48 Mbps -72 d Bm 54 Mbps -70 d Bm Power Over Ethernet Required 4.3 W Security 40/64-, 128-, & 152-bit WEP encryption Block SSID Broadcast VPN pass-through support MAC address filtering with access control lists – up to 256 users 802.1x RADIUS support with EAP TLS, TTLS, PEAP Wi-Fi Protected Access (WPA2) Secure Socket Layer (SSL) remote management login Standards, Safety & Electromagnetic Conformance IEEE 802.11g (2.4 GHz Frequency B&, DSSS Modulation Type) IEEE 802.3af Power over Ethernet (Po E) FCC Part 15 Subpart B & Subpart C CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive 99/5/EC, CSIPR22 (B), AS/NZS 3548 (B) Plenum Rated IEEE 802.11g (2.4 GHz Frequency B&, DSSS Modulation Type) IEEE 802.11a IEEE 802.3af Power over Ethernet (Po E) FCC Part 15 Subpart B, Subpart C & E C-Tick: AS/NZ 3548 Class B CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002-08), EN 301 489-1 V1.4.1 (2002-08), EN 300 328-1 (2001-12), EN 300 328-2 (2003--4), EN301893 (5 G Hz), EN60601, R&TTE Directive 99/5/EC Environmental Specifications Operating temperature: 0 to 40° C (32 to 104° F) Operating humidity: 90% maximum relative humidity, noncondensing Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

NETGEARs Pro Safe Dual Band Wireless Access Point WAGL102 delivers the secure, reliable, high performance wireless local area networks (WLANs) todays mobile workforce demands. The WAGL102 Access Point supports both 5 GHz & 2.4 GHz 54 Mbps radio transmission in both 802.11g & 802.11a in turbo mode. It supports up to 128 simultaneous wireless clients & client types within the same coverage area. Managed & configured by the NETGEAR Prosafe Smart Wireless Switch, the WAGL102 is a "light" wireless access point, which is part of the overall NETGEAR Pro Safe Smart Wireless Solution. The WAGL102 supports integrated IEEE 802.3af Power over Ethernet (Po E) & Wi-Fi certification. Managed & configured by the NETGEAR Pro Safe Smart Wireless Switch (WFS709TP), the WAGL102 is a "light" wireless access point that implements the 802.11 standard. As part of the centralized architecture, much of the security configuration such as WPA2-Enterprise (802.11i), WPA2 & 802.1x support happens at the NETGEAR Pro Safe WFS709TP. The NETGEAR Pro Safe Smart Wireless Switch also supports MAC address authentication, support for multiple BSSID/ VLANs & guest/contractor access. As part of the NETGEAR Pro Safe Smart Wireless Solution, the WAGL02 is cost-effective & simple to install & use. In addition, its Wi-Fi certified & plenum rated
- appropriate for placement above drop-down ceilings & under raised floors. Fitted with two powerful detachable 5 d Bi antennas & compatible with NETGEARs Pro Safe 2.4 GHz antennas for expanded wireless capacity & range. The WAGL102

Includes:: the embedded IEEE 802.3af Power over Ethernet (Po E) port which expands installation options by eliminating the need to locate the Light Wireless Access Point near a power outlet. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...