190W future-proof Po E budget available across 8 Gigabit Po E+ ports (802.3at) — Connect multiple power demanding devices to your network with a single wire for connectivity & lot of power 2 dedicated Gigabit SFP fiber ports — Ideal for active-active or active-passive redundant connections in aggregation to your network core Quiet desktop operation or rack mounting — Temperature-based fan-speed control minimizes system acoustic noise in any environment with max 32d B at 25°C (77°F) ambient Layer 3 static routing with 32 routes (IPv 4 & IPv 6) — Offloads your distribution or core layer routers with local inter VLAN routing directly at the edge of your network Easy-to-use Web browser-based management GUI — No need for an IT expert or a complicated user manual, just configure your network with the user-friendly NETGEAR Smart Managed Web GUI Advanced per port Po E controls for remote power management of Po E connected devices including operation scheduling — Simplifies management of Wireless APs, IP security cameras, LED lighting, secure access door locks, Io T devices… Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings — Latest energy-saving abilities including per-port automatic change to a lower power mode when the port link is down, or idle Configurable L2 network features (VLANs, Rapid Spanning Tree, IGMP Snooping & Querier, IGMP Fast Leave…) — Intuitive Web management streamlines initial configuration for rapid onboarding at the access layer of your network Advanced Smart Switching features (IPv 4/IPv 6 Layer 3 static routing, Diff Serv Qo S policies, LACP Link Aggregation, Broadcast control, Denial of service protection) — Will satisfy even the most advanced small & medium organizations ...

Switches with Essential L2 Features for SMB Networks NETGEAR Smart Switches offer powerful L2 & L2+ features, better Po E functionality, & enhanced performance & usability. They are purposely designed for converged networks where voice, video, data are all carried on a single network platform. These switches are optimized for network efficiency, operational cost savings, & ease of management. This series of switches offers 8 to 52 port configurations both in Fast Ethernet & Gigabit Ethernet with Po E options. All switches come with Gigabit SFP ports for fiber connectivity. These switches are the ideal solution for businesses looking for the best combination of features, performance, & value. Joining NETGEAR's Pro Safe family of Smart Switches with high performance & cost efficiency, this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type of business network. The GS110TP is designed for customers who need a low port density solution with the combination of Gigabit speed & Po E capability. The GS110TP comes with 8 dedicated 10/100/1000 Mbps copper ports to connect to your end devices & two additional Gigabit Fiber ports for uplinks with greater distance. With Po E capability on all 8 copper ports, the GS110TP can automatically detect Po E on the end devices & dynamically manage power assignments & priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points, IP phones & IP cameras, providing flexibility & ease of deployment to your network. The GS110TP comes with A superbly comprehensive set of features, such as enhanced VLAN & Qo S, access control lists (ACL), 802.1x port authentication, rate limiting & IGMP snooping & many more, to provide businesses with networks that are geared for growth while ensuring performance & reliability. With the fanless design & compact form factor, the GS110TP offers quiet operation & is suitable for deployments in any type of environment, especially the ones which are sensitive to noise. GS110TP offers useful Po E power management features to help you better control & monitor your power resource. The Po E timer can help turn off the Po E ports during certain times of the day so that your network can be more secure as well as energy efficient. It can also set prioritization on power usage so that specified ports are always guaranteed to get the power first if total power required exceeds the total power budget. The power will be assigned to the Po E ports dynamically depending on the actual power need of the individual network devices so that you don't need to do any calculation. The Po E LED on the front panel will light up if the Po E usage is reaching the threshold, meaning that nsufficient Po E resource is left for powering up additional ports. NETGEAR Green uses up to 70% power savings compared to the non-Green version. Auto power-down mode saves energy when port is not in use. Cable length detection reduces power usage when network cable is shorter than 10 meters. Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice & video traffic & other real-time applications over less latency-sensitive traffic to ensure reliability & quality. The ability to prioritize traffic ensures quality of latency-sensitive services & applications despite increasing traffic loads. The GS110TP provides an extensive set of Qo S

Features: 802.1p-based prioritization • Layer 3-based prioritization • Rate limiting. Features 8 Po E-capable ports with 2 dedicated Fiber uplinks Auto Vo IP, Auto Video & ACL wizard for easy network deployment Centralized management software for easy deployment & configuration of multiple switches

...

Fits into standard SFP slots 1000 Base-T Gigabit Ethernet copper connectivity RJ45 connector Drives Gigabit Ethernet up to 100m distances with CAT5E/CAT6 cables. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Provides a replaceable power supply for the GSM7328S-200 & GSM7352S-200 Gigabit switches When an RPS (redundant power supply) is used, the power supply can be replaced without stopping the switch or requiring a reboot Provides a "hot swap" capability when used with an RPS ...

When an RPS is used, the power supply can be replaced without stopping the switch or requiring a reboot. Provides a “hot swap” capability when used with an RPS. Provides a replaceable power supply for the GSM72xx PS series Po E Gigabit switches When an RPS (redundant power supply) is used, the power supply can be replaced without stopping the switch or requiring a reboot (hot swap) ...

NETGEAR Pro Safe AXLM762 QSFP+ transceiver module 40 Gigabit LAN 40 G Base-LR4 LC single-mode up to 10 km ...

NETGEAR offers wireless, Ethernet, powerline & phoneline networking products through a complete line of routers, gateways, switches, hubs, & adapters. NETGEAR products offer the strongest security & privacy options available to protect home & business customers.PRODUCT
Features: Adds 10-Gigabit Ethernet fiber connectivity to the GSM7328S & GSM7352S via the AX741 Adapter module; Drive 10-Gigabit Ethernet connectivity to 300m distances;LC connector; Hot Swappable; Interoperable with standard 10GBASE-SR " Short Reach" XFP optics; Supports both 50um & 62.5um multimode fiber cables.
...

NETGEAR Pro Safe AXM761 SFP Transceiver Module Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces Fits into the two built-in 10GE SFP+ interfaces of GSM72xx PS / GSM73xx S Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743 Fits into standard 10 Gigabit SFP+ interfaces LC connector Drives 10 Gigabit Ethernet up to 300m distances with 50/125µm laser-optimized OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33m distances with 62.5/125µm OM1 multimode fiber cables Provides hot-swappable installation or removal 10 G Base SR fiber technology is the same for XFP & SFP+: one Switch equipped with XFP 10 G Base-SR LC connectivity can uplink to another Switch equipped with SFP+ 10 G Base-SR LC connectivity using the same fiber Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Adds 10 Gigabit Ethernet "long-reach" LC fiber connectivity to the standard SFP+ interfaces Fits into the two built-in 10GE SFP+ interfaces of GSM72xx PS / GSM73xx S Fits into the 10GE SFP+ interface of the SFP+ Adapter module AX743 Fits into standard 10 Gigabit SFP+ interfaces LC connector Drives 10 Gigabit Ethernet up to 10km distances with 9/125µm SMF single mode fiber cables Drives 10 Gigabit Ethernet up to 300m distances with 50/125µm laser-optimized OM3 multimode fiber cables Drives 10 Gigabit Ethernet up to 33m distances with 62.5/125µm OM1 multimode fiber cables Provides hot-swappable installation or removal 10 G Base LR fiber technology is the same for XFP & SFP+: one Switch equipped with XFP 10 G Base-LR LC connectivity can uplink to another Switch equipped with SFP+ 10 G Base-LR LC connectivity using the same fiber Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

10GBASE-SR is a port type for MMF (multimode fiber) & uses 850 nm lasers. For longer reach, another standard defined in IEEE 802.3ae is 10GBASE-LR.10GBASE-LR is a port type for SMF (single mode fiber) & uses 1310 nm lasers. Traditionally SMF 10GBASE-LR SFP+ modules are way more expensive than MMF 10GBASE-LR SFP+ modules. MMF & SMF historical short range / long range paradigm may change in short term:since 2014, for new installations, especially indoor, SMF wiring is about half of MMF wiring. As a consequence, lots of new buildings & datacenters now standardize on SMF. But 10GBASE-LR SFP+ transceivers are too expensive for short-range connections. A new market for short distances over SMF has been created:the industry is standardizing on a new class of SMF 10G transmitters with typical 10GBASE-LR LITE SFP+ transceivers. While not a standard yet, 10GBASE-LR LITE has a specified reach of 2 km over standard 9µm single mode fiber. 10GBASE-LR LITE isn’t a replacement for 10GBASE-LR optics:it is just relevant alternative for “shorter” reach SMF applications. ...